▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka blachy stalowej [1 - 20 of 78]

Nożyce do stali profilowanej

Peddinghaus Peddimax 601

Niemcy

1997

używany

na żądanie

INNO28154

Punching force: 600kN, stroke, infinitely adjustable: 10-50mm, stroke rate with 20mm hole punch: 29/min, punching throat depth: 400mm, working height: 1100mm, max. cutting capacity: 400x16mm, max. L-steel (90° cut): 130x12mm, max. round steel diameter: 40mm, diameter square steel: 40mm, max. sheet thickness: 13mm, blade width: 65mm, blade depth: 85mm, drive power: 7.5kW, weight: 1.78t. Already dismantled, ran until the end, with tools, an on-site inspection is possible, with documentation and spare parts list, was regularly serviced.

Nożyce do stali profilowanej

Peddinghaus 219 Super 13 G

Niemcy

1984

używany

na żądanie

INNO28115

Bending capacity: angle iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, T-iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, max. U- and I-steel: NP 18, drive power: 3kW. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/2100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Nożyce gilotynowe

Georg Eckart

Niemcy

1990

używany

na żądanie

INNO27915

An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible.

Maszyna do wykrawania i cięcia cnc

Finn Power (prima Power) SG

Niemcy

2011

używany

na żądanie

INNO27839

Working range X/Y: 1500mm/3000mm, punching force: 30t, max. material thickness (punching): 8mm, max. working speed X/Y: 150m/min, tool stations: 21, multitool stations: 3, max. workpiece weight: 200kg, control: Siemens Sinumerik 840D. Including stacking unit (STS) and loading tower (Combo Tower). Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Ermaksan AP 4100x120

Niemcy

1996

używany

na żądanie

INNO27821

Pressing force: 1200kN, working width: 4100mm, stand distance: 3550mm, table width: 215mm, throat depth: 400mm, stroke: 800mm, working speed: 80mm/s, power: 11kW, weight: approx. 12000kg. Dokumentation vorhanden. An on-site inspection is possible.

Maszyna wykrawająca

Trumpf Trumatic 200

Niemcy

2000

używany

na żądanie

INNO27783

Punching force: 165kN, max. sheet thickness: 6.4mm, working dimensions X/Y: 2070mm/1280mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, stroke rate: 500/min, rapid traverse X/Y: 80m/55m/min. Machine dimensions X/Y/Z: approx. 920mm/5600mm/2200mm, weight: approx. 8000kg, control: Bosch CC220. Documentation available. On-site inspection is possible.

Wykrawarka i maszynę do krojenia CNC

Amada Arcade 210

Niemcy

1993

używany

na żądanie

INNO27782

Pressing force: 20t, stations: 9xA/5xB/2xD, auto-index stations: 2xB/1xC, max. mild steel thickness: 6.35mm, max. hole diameterR: 88.9mm, working dimensions X/Y: 1270mm/2540mm, max. workpiece weight: 100kg, travel X/Y: 1016mm/1270mm, rapid traverse X/Y: 70m/min, strokes 1mm/25mm pitch: 480/250/min, ram stroke: 32mm. Machine dimensions X/Y/Z: approx. 4500mm/2800mm/2200mm, weight: approx. 10000kg, control: Fanuc 16P. The oil tank of the machine is leaking. Documentation available. On-site inspection is possible.

Nożyce gilotynowe

Fasti 506-16-2

Niemcy

nieznany

używany

na żądanie

INNO27775

Working width: 1630mm, max. sheet steel thickness at 400N/mm² tensile strength: 2mm, power: 4kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1600mm, weight: approx. 2500kg. The blade of the machine is worn. An on-site inspection is possible.

Zwijarka czterowalcowa do blachy

Promau/davi MCB2024

Niemcy

2007

używany

na żądanie

INNO27742

Number of rolls: 4, working width: 2000mm, roll length: 2050mm, top roll diameter: 240mm, side roll diameter: 180mm, max. sheet thickness round bending/pre-bending: 16mm/13mm, yield strength: 260MPa, tensile strength: 400MPa, main drive: 11.25kW. Machine dimensions X/Y/Z: approx. 2600mm/2200mm/1200mm, weight: approx. 12000kg, control: Easy-Pro-CNC. Including a second exchangeable top roller. Only stainless steel was processed on the machine. Documentation available. On-site inspection is possible.

Hydrauliczne nożyce gilotynowe

Promecan GH 1030 Z

Niemcy

nieznany

używany

na żądanie

INNO27619

Cutting length: 3100mm, max. sheet thickness: 10mm, backgauge (X-axis): 0mm-1000mm, machine dimensions X/Y/Z: approx. 3600mm/2400mm/1800mm. Documentation available. On-site inspection is possible.

Giętarka trójwalcowa

Schäfer SRMVHY

Niemcy

1989

używany

na żądanie

INNO27510

Working width: 3000mm, max. sheet thickness for pre-bending/bending: 8mm/11mm, roller diameter top roller/side rollers: 300mm/280mm. Machine dimensions X/Y/Z: approx. 7000mm/2000mm/2000mm, weight: approx. 15000kg. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Weinbrenner GP320/4050

Niemcy

2008

używany

na żądanie

INNO27459

Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available.

Prasa do gięcia krawędzi CNC

Weinbrenner GP200/3550

Niemcy

2012

używany

na żądanie

INNO27458

Pressing force: 2000kN, stroke: 350mm, working width: 3550mm, ram speed: downwards: 150mm/s, pressing: 10mm/s, upwards: 110mm, stop time: 84ms, safety distance: 135mm, weight: approx. 19200kg, operating hours: 32553h, controls: Cybelec ModEva 15S. Including 2 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available.

Nożyce gilotynowe

Amada GPS 840

Niemcy

1992

używany

na żądanie

INNO27369

Cutting length: 4000mm, max. steel thickness: 8mm, max. stainless steel thickness: 6mm, max. aluminum thickness: 10mm, stroke: 190mm, motor power: 15kW, dimensions X/Y/Z: approx. 4600mm/2200mm/2200mm, control: Amada Promecam. An on-site inspection is possible.

Nożyce gilotynowe

Hanseatic HS 5/2550

Niemcy

1991

używany

na żądanie

INNO27330

Working width: 2550mm, max. sheet thickness: 5mm, max. power: 7.5kW, dimensions X/Y/Z: approx. 2060mm/3180mm/1400mm, weight: approx. 4200kg. On-site inspection is possible. Available from January 2025

Nożyce gilotynowe

Franz Kramer TM IA 2000/3,25

Niemcy

1970

używany

na żądanie

INNO27329

Working length: 2000mm, max. sheet thickness: 3.25mm, table width: 300mm, side stand projection: 100mm, table/knife bar stop adjustment: 1000mm/550mm, drive power: 5.5kW. Dimensions X/Y/Z: approx. 2300mm/800mm/1500mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible. Available from January 2025.

Linia do produkcji cewek

Schmitz/psm

Niemcy

2007

używany

na żądanie

INNO27178

A Schmitz/PSM slitting line for sheet metal processing is available. Coil weight: 5t/6t, strip width: 650mm, strip thickness (stainless steel): 0,4mm-1,5mm, coil inner diameter: 400mm/508mm/610mm, coil outer diameter: 1740mm/2000mm, speed: 100m/min, working direction: right(left) / DX - SX. Components: Decoiler with paper winder, deflection rollers, foil device on both sides, strip guiding, strip cutter, scrap winder, recoiler, coil take-up cross, hydraulic units as well as various tools and sanding belts. On-site inspection is possible.

Prostownica

Arku RM 3060.4/21

Niemcy

1999

używany

na żądanie

INNO27162

Material width: 600mm, max. sheet thickness: 4mm, number of straightening rollers: 21, straightening roller diameter: 30mm, material cross-section: 1800mm², speed: 6-36m/min, dimensions X/Y/Z: approx. 1500mm/2000mm/1900mm, weight: approx. 3000kg.

Nożyce do stali profilowanej

Geka Hydracop HYD-70

Niemcy

1992

używany

na żądanie

INNO27155

Punching force: 70t, max. punching capacity: 28mm/20mm, max. stroke: 80mm, working speed 19mm/20mm stroke: 48/37. Flat steel shears: Blade length: 455mm, max. cutting capacity length/thickness: 450mm/15mm. Angle steel shears: 90°: 130mm/130mm/13mm, 45°: 70mm/70mm/7mm. Round steel shears: Diameter: 45mm. Square steel shears: 45mm/45mm. Notch depth: 90mm, notch width: 52mm, material thickness: 13mm. Dimensions X/Y/Z: approx. 1300mm/2100mm/1800mm, weight: approx. 2400kg.

Wykrawarka laserowa CNC

Trumpf TruMatic 6000

Niemcy

2007

używany

na żądanie

INNO27127

Laser type: TruFlow 2700, punching force: 220kN, laser power: 2700W, max. sheet thickness: 8mm, working range X/Y: 2585mm/1280mm, speed X/Y/simultaneous: 90/60/108m/min, max. workpiece height punching/laser: 35mm/22mm. Dimensions X/Y/Z: 7500mm/8100mm/2400mm, weight: approx. 16000kg, operating hours: 73431h (12.06.2024). Including TrumaGrip GripMaster with pneumatic scissor lift table (400mm), TrumaLift SheetMaster 1305 with 4 movable tables, TrumaTool ToolMaster with 40 stations and chip conveyor. Resonator transmitter tube renewed (2022), diaphragm vacuum pump renewed (2023) and leak test carried out (2024). Documentation available. On-site inspection is possible.