▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Frezarki [41 - 60 of 105]

Frezarka uniwersalna CNC

Deckel Maho MH 600W

Niemcy

1997

używany

na żądanie

INNO27796

Tool length: 250mm, max. tool weight: 6kg, control: Heidenhain CNC 234, connected load: 40kVA, machine dimensions (LxWxH): 4700mm/4100mm/2300mm, weight: approx. 2.8t, operating hours: 43,408h. The guide rail of the front door is broken. Documentation available. An on-site inspection is possible.

Frezarka uniwersalna CNC

Maho MH 1600 S

Niemcy

1991

używany

na żądanie

INNO27795

X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm, tool holder: ISO 50, speed: 20-4000/min, feed rate: 1-4000mm/min, max. rapid traverse: 10m/min, number of tool positions: 36, max. tool diameter: 160/210mm, max. tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions: 5080mm/36xWxH Tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions (LxWxH): 5080mm/3650mm/2005mm, weight: approx. 16t, documentation available, complete retrofit 2015.

Frezarka uniwersalna CNC

Reckermann Delta1300 K

Niemcy

2008

używany

na żądanie

INNO27790

Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible.

Frezarka CNC

Dmg Mori CMX 1100 V

Niemcy

2019

używany

na żądanie

INNO27777

Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible.

Frezarka

Dpm

Niemcy

nieznany

używany

na żądanie

INNO27706

An NC bed milling machine DPM (Digital Precision Machine) with defective control is available. Travel X/Y/Z: approx. 800mm/430mm/600mm, table dimensions X/Y: 1270mm/255mm, spindle mount: R8/CAT40, speed: 5000rpm, spindle power: 2.2kW, max. table load: 340kg, rapid traverse: 2.54m/min. Dimensions X/Y/Z: approx. 2000mm/2600mm/2300mm, weight: approx. 2500kg. On-site inspection is possible.

Frezarka CNC

Maka M 7t X

Niemcy

2013

używany

na żądanie

INNO27681

Travel X/Y/Z: 2000mm/1000mm/650mm, axes: 5, spindle power: 10kW, speed: 27000rpm, control: Siemens Sinumerik 840 DSL, weight: approx. 7000kg. An on-site inspection is possible.

Frezarka CNC

Geiss LIN 2000x1000

Niemcy

2001

używany

na żądanie

INNO27659

Travel X/Y/Z: 2450mm/1400mm/800mm, travel B/C: 210°/520°, speed X/Y/Z: 120m/min/120m/min/60m/min, speed B/C: 14275°/min/18000°/min, speed: 40000rpm, spindle power: 2.3kW, cube dimensions X/Y/Z: 2000mm/1000mm/560mm, tool slots: 6. Including noise protection hood, spindle cooling unit and 2x vacuum pumps. Documentation available. On-site inspection is possible.

Frezarka

Johannsen/bfm/böhme/schanbacher/fleckstein T8E/30

Niemcy

1981

używany

na żądanie

INNO27649

Various metalworking machines are available. 1) Johannsen T8E belt grinder, year of manufacture: 1979, table dimensions X/Y: 1900mm/800mm, machine dimensions X/Y/Z: approx. 3200mm/1000mm/1250mm, weight: approx. 530kg. 2) Milling machine BFM 30, year of construction: 1981, machine dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm, weight: approx. 360kg. 3) Böhme router, machine dimensions X/Y/Z: approx. 800mm/900mm/1550mm, weight: approx. 320kg. 4) Fleckstein router, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. 5) Fleckstein horizontal milling machine, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. On-site inspection is possible.

Frezarka i grawerka CNC

Lang Impala 400

Niemcy

2004

używany

na żądanie

INNO25361

Software: LErgoCAD 3D plus 1.2, operating hours: approx. 1900h, with relief designer, Impala 400 frequency converter, was replaced in 2007, S&M 21.49.59 AX spindle generator, was renewed in October 2012. Power depending on equipment max. 6 kW The system is complete, the 3-D pushbutton appears to have a ground fault, but is fully functional. Working area XxYxZ: 500x400x200 mm Clamping area: XxY: 640 x 540 mm No accessories available Pictures are not available at the moment Machine dimensions LxWxH: 1550x1620x1850 Machine dimensions opened LxWxH: 3110x1620x1850 mm

Frezarka narzędziowa CNC

Deckel Maho FP2A

Niemcy

nieznany

używany

na żądanie

INNO27568

Travel X/Y/Z: 300mm/300mm/400mm, speed: 4000rpm, spindle mount: ISO40, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, spindle power: 4kW. Machine dimensions X/Y/Z: approx. 2000mm/3000mm/2000mm, weight: approx. 1500kg.

Frezarka CNC

Hartkämper AL 40/200

Niemcy

1999

używany

na żądanie

INNO27564

The buffer battery must be replaced. Machine dimensions X/Y/Z: approx. 5500mm/2700mm/3100mm, control: Heidenhain.

Frezarka kopiująca

Mühlacker

Niemcy

1982

używany

na żądanie

INNO27500

Travel Z: 120mm, clamping range: 190mm/160mm, speed: 12000rpm, compressed air connection: 6bar.

Frezarka narzędziowa CNC

Deckel Maho MH 1000 C

Niemcy

1986

używany

na żądanie

INNO27478

Travel: 1000mm/560mm/1100mm, tool holder: ISO 50, quill stroke: 125mm, speed: 2000rpm, feed: 3000mm/min, rapid traverse: 6m/min, max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, weight: approx. 7100kg, CNC 432 control, operating hours: 70771h. Documentation available.

Frezarka narzędziowa CNC

Klopp-korradi UW5

Niemcy

1991

używany

na żądanie

INNO27467

A defective CNC universal tool milling and drilling machine Klopp-Korradi is available. Travel X/Y/Z: 1000mm/600mm/500mm, quill stroke: 63mm, spindle center-to-clamping surface distance min./max.: 60mm/560mm, max. workpiece weight: 630kg. Table dimensions X/Y: 1300mm/700mm, groove width: 18mm, groove distance: 90mm, tool holder: SK40, spindle diameter: 60mm, max. spindle torque: 630Nm, speed: 4000rpm. Control system: Heidenhain TNC 360, power supply unit is defective. Documentation available. On-site inspection is possible.

Frezarka uniwersalna

Deckel FP4MA

Niemcy

1990

używany

na żądanie

INNO27298

Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, speed: 2500rpm, spindle mount: SK40/M16, feed: 630mm/min, rapid traverse: 1300mm/min. Dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 1500kg, control: Grundig Contour 2, documentation available. On-site inspection is possible.

Frezarka narzędziowa CNC

Mikron WF 51C/15S

Niemcy

1986

używany

na żądanie

INNO27210

Travel X/Y/Z: 800mm/500mm/460mm, feed X/Y/Z: 3000mm/min, rapid traverse X/Y/Z: 6000mm/6000mm/400mm/min, max. workpiece weight: 500kg, speed: 3150rpm, spindle power: 8kW, spindle bore: 110mm, tool holder: ISO40/M16. Dimensions X/Y/Z: approx. 2700mm/2300mm/2300mm, weight: approx. 3100kg, control: Heidenhain TNC 150, vice included.

Frezarka

Steinel BZ20

Niemcy

1982

używany

na żądanie

INNO27209

Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.

Frezarka CNC

Mazak FH 880

Niemcy

1997

używany

na żądanie

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.

Frezarka uniwersalna CNC

Mikron WF 51C/155

Niemcy

nieznany

używany

na żądanie

INNO27081

Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available.

Frezarka

Wmw FUW250/IV

Niemcy

nieznany

używany

na żądanie

INNO27005

Table size X/Y: 630mm/345mm, table clamping surface X/Y: 700mm/300mm, travel X/Y/Z: 400mm/250mm/300mm, spindle mount: SK40, speed: 2240rpm, feed X/Y/Z: 1250mm/min, distance spindle-table: 400mm, quill stroke: 80mm, drive power: 5.5kW. Dimensions X/Y/Z: approx. 2300mm/2650mm/2300mm, weight: approx. 1700kg. On-site inspection is possible.