▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [641 - 660 of 915]

Maszyna do cięcia z laserem

Salvagnini L5-30

Niemcy

2011

używany

na żądanie

INNO26181

Max. workpiece dimensions: 1500x300mm, laser power: 3kW, max. load: 5t, operational hours counter: 5364h, with loading table, suction units for removing the sheets from the loading trolley, configuration ADL30-PMC30-TLE30 155C L5-30ASF, unloading trolley, enclosure, pallet storage rack, workbench, storage table, chip trolley and documentation, an inspection is possible, was maintained regularly.

Zaciskarka środkowa

Somavis T-8K / T-8L

Niemcy

1983

używany

na żądanie

INNO15816

There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min.

Tokarka cykliczna

Wemas HT 500/1500

Niemcy

2000

używany

na żądanie

INNO26127

X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.

Wiertarka słupowa

Alzmetall AB 4 SJ

Niemcy

1951

używany

na żądanie

INNO26120

Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm.

Tokarka

Weisser Heilbronn JUNIOR

Niemcy

1972

używany

na żądanie

INNO26119

An inspection is possible.

Wiertarka promieniowa

Csepel RF 30a

Niemcy

nieznany

używany

na żądanie

INNO26118

Rotational speed: 37-1900/min, an inspection is possible.

Centrum frezarskie CNC

Stama MC 726/MT

Niemcy

2008

używany

na żądanie

INNO26098

X-travel: 500mm, y-travel: 380mm, z-travel: 360mm, main spindle/turning spindle speed: 10,500/ 3000/min, max. axis speed: 60m/min, control: Siemens 840D, with HSK-A63 and collet chuck, some spare parts are also available.

Szlifierka do otworów

Jung C8

Niemcy

1965

używany

na żądanie

INNO26061

With documentation, has been maintained regularly, an inspection is possible.

Frezarka CNC

Friedrich Deckel Ag FP3NC

Niemcy

1990

używany

na żądanie

INNO26056

Control: Deckel Dialog 11, with vice, an inspection is possible.

Indukcyjny piec do topienia

Inductotherm

Niemcy

nieznany

używany

na żądanie

INNO26048

The machine was overhauled by the manufacturer in 2022, the coating inside the coil was renewed, the oven was then no longer used, the oven no longer complies with the EMC guidelines, without control, an on-site inspection is possible.

Frezarka wspornikowa

Veb Fritz Heckert FU 250x1000

Niemcy

1980

używany

na żądanie

INNO26043

X-travel: 900mm, y-travel: 300mm, z-travel: 380mm, rotational speed: 28-2800/min, feed rate: 10-630mm/min, connected load: 5.8kW, weight: 1.7t, with dividing head, counter spindle, holders, spare parts, various tools, an inspection is possible.

Tokarka pionowa

Hessapp DVH 450 e

Niemcy

2005

używany

na żądanie

INNO26033

Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024.

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52C

Niemcy

2004

używany

na żądanie

INNO26008

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52G

Niemcy

2004

używany

na żądanie

INNO26007

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52G

Niemcy

2004

używany

na żądanie

INNO26005

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52G

Niemcy

2004

używany

na żądanie

INNO26004

The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.

Szlifierki do wałków

Karstens ASE A 650

Niemcy

nieznany

używany

na żądanie

INNO25999

Grinding length: 650mm, center height: 150mm, grinding wheel dimensions: 400x80x127mm, sleeve diameter with Mk 4 seat: 50mm, weight: 2.9t, including belt filter, electrical circuit diagrams and hydraulic diagrams, an on-site inspection is possible.

Obrotowa maszyna transferowa

Imoberdorf imo-smart

Niemcy

2015

używany

na żądanie

INNO25992

Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader.

Tokarka CNC

Padovani Labor E255x1500

Niemcy

1996

używany

na żądanie

INNO25990

Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible.

Maszyna polerska

Etnst Thielenhaus KM 150 S1A

Niemcy

1979

używany

na żądanie

INNO25989

There are two identical polishing machines available, with accessories and documentation.