▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [461 - 480 of 896]

Szlifierka narzędziowa CNC 6-osiowa

Klingelnberg SNC 31

Niemcy

2020

używany

na żądanie

INNO26616

A modernized Klingelnberg SNC 31 CNC 6-Axis Tool Grinding Machine. Modernizations: new belt drives, new flanges, new servo motors and new couplings in all axes. Hydraulics: new drive pump, new motor, new hydraulic hoses, original lubricant pump. Installation of a new control cabin with CNC (Siemens 840D sl) and new electrical construction (VDE). Detailed information about the modernization on request. With filter system and CO2 extinguishing system (Dangelmaier). On-site inspection is possible.

5-osiowe centrum obróbcze CNC

Pos Mill H800 U

Niemcy

2016

używany

na żądanie

INNO26607

Traversal X/Y/Z: 670/820/600mm, swivel range: +/- 120°, tool storage: 120 places. Table load: 1,200kg, spindle speed: 18.00 n/m, rotary table: Ø 800mm, endless 360 degree rotation. Tool holder: HSK 63, Max. Weight tools: 8kg, Pneumatic: 6bar, Control: Heidenhain TNC 640. Machine hours: 12,400h, Spindle running time: 2,340h, Options available: IKZ variable, variety of HSK fixtures as good as new. Dimensions length/width/height: 4150mm/5000mm/3500mm, weight: 20 tons

5-osiowe centrum obróbcze CNC

Sw BA W04-42

Niemcy

2015

używany

na żądanie

INNO26608

Control: Sinumetrik 840D sl, operating hours: 41634h, spindle running time: 19155h. Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm. Tool holder/size: HSK-A63, max. spindle speed: 17500 rpm, internal coolant supply available. Tool changer available with 4x46 tool positions and pick-up process. Including: Chip conveyor: KNOLL 800 K-1, cooling lubricant preparation, cooling unit: Lahntechnik LM 220-32.

Hydrauliczne nożyce do profili stalowych

Bernardo HPS 90

Niemcy

2018

używany

na żądanie

INNO26601

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm

Piła tarczowa do metalu

Metallkraft MKS 350 V

Niemcy

2016

używany

na żądanie

INNO26596

Max. Saw blade diameter: 370mm, mitre angle: -45 - +60°, length: 1050mm, width: 1000mm, height: 1850mm, weight: 450kg. Cutting capacity at 0°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 170x90mm. Cutting capacity at -45°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 125x90mm. Cutting capacity at +45°: (round) solid material: 90mm, (round) tube: 90mm, (square) tube: 90x90mm, (rectangular) tube: 90x90mm.

Spawarka laserowa

Bluelasertools Penwelder BLT 1500

Niemcy

2022

używany

na żądanie

INNO26595

Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new.

Szlifierki do wałków

Junker Quickpoint 3000/60S

Niemcy

2019

używany

na żądanie

INNO26594

Flexible high-performance grinding machine with JUROBOT handling-cell (FANUC M-10iA): Z-axis/grinding length: 500mm max., orbital diameter: 150mm max., workpiece weight: 15kg max., grinding wheel diameter: 350mm max., operating hours: 12238h, with documentation, an on-site inspection is possible.

Szlifierki do wałków

Junker Quickpoint 3000/60S

Niemcy

2017

używany

na żądanie

INNO26593

Flexible high-performance grinding machine JUROBOT handling-cell (FANUC M-10iA): Z-axis/grinding length: 500mm max., orbital diameter: 150mm max., workpiece weight: 15kg max., grinding wheel diameter: 350mm max., operating hours: 23219h, with documentation, an on-site inspection is possible.

Szlifierka do zewnętrz wałków CNC

Cetos BUB 50B NC 3000

Niemcy

1999

używany

na żądanie

INNO26587

Grinding diameter: 500mm, grinding length: 3000mm, centre height: 255mm, grinding wheel diameter: 500mm, cutting speed: 100mm/min, control: Siemens SIMATIC HMI, connected load: 22kVA, length: 8900mm, width: 3500mm, height: 1935mm, weight: 10.5t, with documentation and extensive accessories, an on-site inspection is possible.

System czyszczenia strumieniowo-ściernego

Modena CM T10

Niemcy

2016

używany

na żądanie

INNO26583

Working diameter: 1000mm, working height: 450mm, max. workpiece weight: 900kg, noise level: 78dBA, connected load: 7.34kW, length: 3000mm, width: 3000mm, height: 3500mm, weight: 2.045t, operating hours: 9372h, including documentation, cabin with turntable, manganese lining, blast wheel (radial armouring, ceiling armouring, throwing blades in HM design), sieve, bucket elevator, separator, extraction system cyclone, filter (new filter cartridges installed), control panel electrical system, has been regularly maintained, on-site inspection is possible.

Zgrzewarka punktowa

Dalex/ Pilger PL 63-1

Niemcy

nieznany

używany

na żądanie

INNO26569

Length: 1500mm, width: 1300mm, height: 1500mm, weight: 350kg, including electrodes and cooling unit, without documentation, an on-site inspection is possible.

Zgrzewarka punktowa

Dalex Pilger PMS 10-4

Niemcy

nieznany

używany

na żądanie

INNO26568

Length: 1500mm, width: 1300mm, height: 1500mm, weight: 450kg, including electrodes and cooling unit, without documentation, on-site inspection is possible.

Maszyna do erodowania drutu

Charmilles ROBOFIL 4030 SI

Niemcy

2000

używany

na żądanie

INNO26563

Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.

Obrabiarka elektroerozyjna głębinowa

Charmilles 35P

Niemcy

2001

używany

na żądanie

INNO26561

Connected load: 5kVA, weight: 2.5t, the cable of the C-axis motor is defective, an on-site inspection is possible.

Pilarka taśmowa do stali

Kasto SBA 320/500 U-DG

Niemcy

1994

używany

na żądanie

INNO26571

Cutting dimensions: 500x320mm, connected load: 2.2kW, length: 3550mm, width: 2000mm, height: 2110mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.

Pilarka taśmowa do stali

Kasto SBA 260/400 U

Niemcy

1997

używany

na żądanie

INNO26570

Cutting dimensions: 400x260mm, connected load: 2.2kW, length: 2500mm, width: 1000mm, height: 1500mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.

Zgrzewarka punktowa

Nimak PMP 6-2 ECO/80/5032

Niemcy

2000

używany

na żądanie

INNO26567

Electrode force: 900daN, length: 1500mm, width: 1200mm, height: 1800mm, weight: 720kg, on-site inspection is possible, with refrigeration unit, tools and documentation, has been regularly serviced.

Prasa do gięcia krawędzi

Lvd PPE 160/40 MNC 95

Niemcy

1992

używany

na żądanie

INNO26565

Working width: 4000mm, pressing force: 160t, control: MNC 95/C, connected load: 18kW, length: 4100mm, width: 1900mm, height: 3100mm, weight: 14.5t, including tools, the documentation is partially available, the laser system requires maintenance.

Laboratoryjny piec komorowy

Linn High Therm VMK-250

Niemcy

nieznany

używany

na żądanie

INNO26560

Laboratory Chamber Furnace with controller, T.max °C: 1200, 3.7kW, Inside dimension in mm (wxdxh) 250 x 400 x 250 equals 25.0 liters.

Prasa do wyciskania

Collin

Niemcy

nieznany

używany

na żądanie

INNO26545

Pressing force: 1400t, press-out length flat: 1500-12,000mm, recipient 1: max block diameter: 185mm, max block length: 350mm, recipient 2: max block diameter: 150mm, max block length: 580mm, max. operating pressure: 240bar, connected load: 535kW, retrofit 2001 includes power increase to 1000t, new piston rods ground and chrome-plated. Operating pressure: 240bar, connected load: 535kW, year of construction is original 1915, retrofit 2001 includes power increase from 1000t to 1400t, new piston rods in ground and chrome-plated design, installation of a new shear, completely new mould slide, hydraulics: renewal of the control, regulating and safety valves. Completely new pipework, completely new control cabinet, control panel, length measuring system and control system (Siemens S7-300), with documentation, an on-site inspection is possible.