▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [341 - 360 of 915]

Spawarka do naroży

Fröhlich/migatronic SAX700/Automig 273i

Niemcy

2018

używany

na żądanie

INNO28104

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

Wiertarka elektroerozyjna

Agie Charmilles Drill 11

Niemcy

2008

używany

na żądanie

INNO28096

An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible.

Pionowe centrum obróbcze CNC

Dmg Mori CMX 600 V

Niemcy

2017

używany

na żądanie

INNO28095

Travel X/Y/Z: 600mm/560mm/510mm, accuracy X/Y/Z: 6µm, rapid traverse X/Y/Z: 30m/min, max. feed force: 5kN, max. feed: 30m/min, table dimensions X/Y: 900mm/560mm, max. table load: 600kg. Spindle speed: 12000rpm, drive power: 13kW, torque: 82Nm. Tool positions: 30, max. tool diameter free/occupied: 130mm/80mm, max. tool length: 300mm, max. tool weight: 8kg. Machine dimensions X/Y/Z: approx. 3050mm/3500mm/2950mm, weight: approx. 5000kg, operating hours: 59667h, spindle hours: 16074h. Including internal coolant supply. Documentation available. On-site inspection is possible.

Frezarka uniwersalna CNC

Deckel FP 5 CC

Niemcy

nieznany

używany

na żądanie

INNO28092

Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1500mm/675mm, speed: 6300rpm, tool holder: SK40, feed: 5000mm/min, spindle power: 7.5kW, machine dimensions X/Y/Z: approx. 2400mm/2500mm/2500mm, weight: approx. 6000kg. On-site inspection is possible.

Tokarka cykliczna CNC

Romi M 420

Niemcy

nieznany

używany

na żądanie

INNO28091

A Romi CNC cycle lathe is available. Center height: 215mm, center width: 1000mm, turning diameter over bed/face slide: 430mm/204mm, spindle bore: 53mm, rapid traverse X/Z: 7.5m/min / 10m/min, spindle speed: 4000rpm, main spindle motor power: 7.5kW, tool positions: 8, machine dimensions X/Y/Z: approx. 2800mm/1300mm/2000mm, weight: approx. 3000kg, control: GE Fanuc series 21i-TB. Documentation available. On-site inspection is possible.

Frezarka CNC

Geiss FZ 2000x1000

Niemcy

2007

używany

na żądanie

INNO28088

A Geiss CNC 5-axis lathe is available. Connected load: 22.62kW, travel X/Y/Z: 2400mm/1400mm/760mm, B-axis: 210°, C-axis: 520°, rapid traverse X/Y/Z: 75m/min, 75m/min, 70m/min, rapid traverse B-/C-axis: 20880°/min. Speed: 40000rpm, tool holder: HSK-32 E, spindle power: 9kW, tool positions: 12, weight: approx. 35000kg, control: Siemens 840DI. Including center partition for two-station operation, Busch 110m³/h vacuum pump, Rittal SK 3320 cooling unit, measuring probe and knee switch for the vacuum. Documentation available. On-site inspection is possible.

Maszyna do cięcia strumieniem wody CNC

Stako Trium WPC

Niemcy

2016

używany

na żądanie

INNO28087

Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible.

Pozostałe zapasy

Klopp/müller/reinhardt FWU 13-6/MPS2/RAS 52.80

Niemcy

1970

używany

na żądanie

INNO28076

Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.

Wiertarka do głębokich otworów

Heyligenstaedt

Niemcy

1951

używany

na żądanie

INNO28075

A Heyligenstaedt deep-hole drilling machine is available. Speed: 1120 rpm, turning diameter: 282 mm. The wedge bar chuck is of high quality and relatively new. An on-site inspection is possible.

System spawania dźwigarów kratowych

Gad RE40/R33/R31

Niemcy

2009

używany

na żądanie

INNO28062

A complete GAD lattice girder welding system with Wafios wire straightening and cutting machines is available. 1) GAD mesh welding machine, year of manufacture: 2009, mesh width: 270mm-3000mm, mesh length: 600mm-3500mm, line wire diameter: 2.5mm-8mm, line wire pitch single rod/double rod: 25mm/50mm, cross wire diameter: 2.5mm-8mm, cross wire pitch: 15mm, transformers: 3x, machine dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. 2) Wire straightening and cutting machine Wafios RE 40, year of construction: 2021, wire diameter: 3mm-10mm, cutting capacity: 120 rods/min, cutting capacity with fixed stop and continuous cut: 220 rods/min. 3) Wafios R33 wire straightening and cutting machine, year of manufacture: 2011, wire diameter: 1.5mm-7mm, cutting capacity: 160-320 cuts/min. 4) Wafios R31, year of manufacture: 1997, wire diameter: 1.5mm-7mm, cutting capacity: 160-270 cuts/min. System production capacity: approx. 1250kg/h, total system dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. All wire straightening and cutting machines including reel. Documentation available. On-site inspection is possible.

Tokarka CNC

Boehringer VDF 250C

Niemcy

1992

używany

na żądanie

INNO28061

Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025.

Robot do obróbki profili

Kaltenbach KC 1200

Niemcy

2010

używany

na żądanie

INNO28050

With notching robot Kuka + transport system T13 / M150, equipped with oxy-fuel torch for steel profiles, sheets, rectangular tubes. Number of axes notching system: 8, transport system infeed length set up: approx. 13.5m (1 long version still available), transport system outfeed length set up: approx. 10.0m (4 standard trestles still available), electronics for cross conveyor infeed and outfeed: completely included in the control cabinet (without cross conveyor), safety fencing: only partially set up (complete fencing available), safety light barriers: not set up (completely available). With documentation, an on-site inspection is possible.

Centrum toczenia i frezowania CNC

Gildemeister Twin 65

Niemcy

2004

używany

na żądanie

INNO28048

A Gildemeister CNC double-spindle turning and milling center is available. Center height: 1288mm, center width: 900mm, max. turning length: 300mm, max. turning diameter over bed/face slide/crank: 250mm. Spindle diameter: 120mm, spindle bore: 79mm, max. quill stroke: 300mm, quill taper: MK4. Machine dimensions X/Y/Z: approx. 6200mm/4700mm/2500mm, weight: approx. 10000kg, control: Siemens Sinumerik 840D, operating hours: 72590h. Including cooling lubricant system and bar loader Breuning ILS RBK. Without cutting tools. Documentation available. On-site inspection is possible.

Tokarka dwuwrzecionowa CNC

Takisawa TT-500 GD

Niemcy

2018

używany

na żądanie

INNO28044

A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible.

Walzenpresse

Köppern 52/7, 5ST315 DG 1 E 750x315

Niemcy

2018

używany

na żądanie

INNO28034

A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible.

CNC prasa precyzyjnego cięcia

Feintool GKP-F 160/GKP-F 250

Niemcy

2003

używany

na żądanie

INNO28033

There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible.

Tokarka

Wmw DLZ 630 IV x2000

Niemcy

1983

używany

na żądanie

INNO28026

Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.

Przeciągarka szczelinowa

Hahndor REWK 86/14

Niemcy

2007

używany

na żądanie

INNO28025

A Hahndorf grooving and broaching machine is available. Grooving: Stroke min./max.: 80mm/300mm, max. groove width: 34mm. Joint length: max. joint length: 300mm. Broaching: max. groove width: 14mm, max. broaching tool length: 640mm. Cutting speed forward/reverse: 3m/min, machine weight: approx. 300kg. Including various tools and accessories. Documentation available. On-site inspection is possible.

Prasa ekscentryczna

Bihler GRM 50

Niemcy

nieznany

używany

na żądanie

INNO28020

Stroke rate: 250/min, press force: 250kN, stroke: 16mm. Including press with 2 slides, reel, welding device with cooling unit and automatic nut feeder. Documentation available. On-site inspection is possible.

Szlifierka narzędziowa CNC

Smp Numaffut CA6

Niemcy

2001

używany

na żądanie

INNO28009

A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.