System czyszczący

Perkute FR 130

Niemcy

2006

używany

na żądanie

INNO28567

A Perkute Clean-o-mat front-loader spray cleaning system is available. Pump capacity: 7.5kW, heating capacity: 18kW, max. rotary basket load: 2000kg, max. compressed air: 10bar, empty weight: approx. 1000kg. On-site inspection is possible.

więcej

Prasa do szklenia

Eder + Müller VKP-KH

Niemcy

2003

używany

na żądanie

INNO28549

A glazing press is available for mounting and fixing glass panes in window and door frames. Span: approx. 3750mm, drive type: pneumatic, operating pressure: 7bar. On-site inspection is possible.

więcej

Piła tarczowa

Eisele LMS II HVG-225

Niemcy

1980

używany

na żądanie

INNO28547

Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

więcej

Szlifierka powierzchniowa

Elb-schliff SW 15 VA II

Niemcy

1985

używany

na żądanie

INNO28546

An old ELB surface grinding machine is available. Grinding length: 1500mm, grinding width: 450mm, workpiece height: 340mm, magnetic clamping plate X/Y: 1500mm/400mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76mm, grinding spindle speed: 2890rpm, max. table load: 700kg, machine weight: approx. 5000kg. The drive spindle of the machine must be replaced. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Grob G351

Niemcy

2015

używany

na żądanie

INNO28538

Travel X/Y/Z: 600mm/855mm/750mm, rapid traverse X/Y/Z: 70m/45m/90m/min, tool holder: HSK 40, speed: 16000rpm, max. workpiece weight: 300kg, control: Heidenhain, machine weight: approx. 15300kg. Including 38bar IKZ, Blum laser probe, tools and holder. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Grob G350

Niemcy

2013

używany

na żądanie

INNO28537

Travel X/Y/Z: 600mm/855mm/750mm, rapid traverse X/Y/Z: 70m/45m/90m/min, tool holder: HSK 40, speed: 28000rpm, max. workpiece weight: 300kg, control: Heidenhain, machine weight: approx. 15300kg, spindle hours: approx. 6000h. Including 38bar IKZ, Blum laser probe, tools and holder. Documentation available. On-site inspection is possible.

więcej

Tokarka uniwersalna CNC

Mag Ias DUS 800 ti/6000

Niemcy

2013

używany

na żądanie

INNO28531

Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible.

więcej

System czyszczący

Branson B452R

Niemcy

nieznany

używany

na żądanie

INNO24984

Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg.

więcej

Prasa krawędziowa CNC

Fasti 940-200-40

Niemcy

1998

używany

na żądanie

INNO28527

Working width: 4000mm, pressing force: 2000kN, max. operating pressure: 30MPa, connected load: 22.38kW, protective distance: 156mm, holding time: 98ms. Documentation available. On-site inspection is possible.

więcej

Tokarka wysokoobrotowa

Okuma LS 450

Niemcy

nieznany

używany

na żądanie

INNO28526

Center height above bed/slide: 450mm/250mm, center distance: 850mm, spindle bore: 52mm, travel X/Z: 270mm/140mm, quill stroke: 150mm, quill diameter: 80mm. Machine dimensions X/Y: approx. 2400mm/1200mm, weight: approx. 2500kg. Some of the gears are defective, which means that the speeds cannot be operated. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Mazak VTC-200B

Niemcy

2000

używany

na żądanie

INNO28524

Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle-table distance: 180mm-690mm, spindle center-to-column distance: 530mm, spindle mount: SK40, spindle power: 15kW/11kW, spindle speed: 10000rpm, tool positions: 24, feed: 8m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 3350mm/2900mm/2800mm, weight: approx. 6000kg, control: Mazatrol 640M. On-site inspection is possible.

więcej

Router brzegowy

Hebrock AKV 83

Niemcy

1994

używany

na żądanie

INNO28523

A Hebrock edge milling machine is available. Workpiece height range: 10mm-50mm, max. edge thickness: 1mm, min. workpiece width: 50mm, min. workpiece length: 170mm, feed speed: 4m/min, connected load: 3kW. Machine dimensions X/Y/Z: approx. 1750mm/700mm/1250mm, weight: approx. 120kg. On-site inspection is possible.

więcej

Tokarka pionowa CNC

Emag VL 5 m LT

Niemcy

2003

używany

na żądanie

INNO28520

An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.

więcej

Suszarka korytowa

Fst Drytee VE-1

Niemcy

2013

używany

na żądanie

INNO28519

Two identical Drytee drying machines are available. Useful chamber dimensions X/Y/Z: 700mm/1400mm/1150mm, external dimensions X/Y/Z: approx. 1350mm/1600mm/1800mm, heating capacity: 36kW, operating temperature: 90°C, heating medium: thermal oil, heating medium temperature: 140°C, air circulation rate: 3x5200m³/h. Documentation available. On-site inspection is possible.

więcej

Maszyna do zgrzewania sworzni

Soyer KTS-1050 CNC

Niemcy

2022

używany

na żądanie

INNO28516

A Soyer stud welding machine is available. Table dimensions X/Y: 1000mm/1540mm, clamping surface X/Y: 800mm/1020mm, max. table load: 100kg, travel X/Y/Z: 800mm/1020mm/300mm. Positioning speed: 400mm/s, positioning accuracy: +/-0.15mm, repeat accuracy: +/-0.05mm, stud and pin diameter range: 3mm-10mm, max. stud and pin length: 40mm. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/2000mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

więcej

Frezarka

Wmw FSS 315-V

Niemcy

nieznany

używany

na żądanie

INNO28515

Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible.

więcej

Szlifierka narzędziowa CNC

Strausak Fleximat 91 CNC

Niemcy

1991

używany

na żądanie

INNO28513

Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible.

więcej

Hydrauliczna wykrawarka

Boschert

Niemcy

1978

używany

na żądanie

INNO28512

A Boschert hydraulic notching and punching machine is available. Notching 4mm+6mm: 225mm/225mm, pressing force: 12.5t, table height: 900mm, power: 4kW, machine dimensions X/Y/Z: approx. 1100mm/800mm/1200mm, weight: approx. 1450kg. The motor of the machine is defective. On-site inspection is possible.

więcej

Frezarka CNC

Mazak VTC200-B-II

Niemcy

2002

używany

na żądanie

INNO28511

Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y/Z: 28020mm/655mm/640mm, max. table load: 800kg, speed: 12000rpm, spindle power: 18.5kW, tool holder: SK40, tool positions: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 2850mm/3350mm/2800mm, weight: approx. 6100kg, control: Mazatrol 640M. Documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Hyundai HD2200

Niemcy

nieznany

używany

na żądanie

INNO28510

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki