Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Other machines
Ceramics, stones and minerals 8 Glass machinery 31 Special machines 9 Vacuum technology 3 Waste disposal, recycling 24
Innovac used-machines Other machines [1 - 20 of 75]
Bale-Press-Veb-KME used
Bale Press
Veb KME
Germany
1985
used
on request
INNO28351
A vertical baler for paper and cardboard is available. Motor power: 0.75kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/2000mm, weight: approx. 1200kg. On-site inspection is possible.
more
Sand-Blasting-Machine-Sag-Magnetomat-T4 used
Sand Blasting Machine
Sag Magnetomat T4
Germany
2004
used
on request
INNO28320
A sandblasting machine S.A.G. for the glass industry overhauled in 2024 is available. Blasting capacity: 15m²/h, grain size: corundum F 100 (EKF 100), max. blasting dimensions Y/Z: 2250mm/3000mm, max. workpiece height: 2400mm, max. workpiece width: unlimited, glass thickness range: 3mm-40mm, air consumption: 1200l/min, machine dimensions X/Y/Z: approx. 2100mm/4200mm/3450mm. Documentation available. An on-site inspection is possible. Expected to be available from Q1 2025.
more
Single-Shaft-Shredder-Gross-GAZ-62 used
Single-Shaft Shredder
Gross GAZ 62
Germany
2011
used
on request
INNO28119
A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.
more
Bale-Press-Dixi-18-S used
Bale Press
Dixi 18 S
Germany
2011
used
on request
INNO28094
A hydraulic, vertical Dixi baler is available. Motor power: 4kW, pressing force: 180kN, pressing time: 12s, cycle time: 22s, filling opening X/Y: 1070mm/620mm, working height: 98mm, bale dimensions X/Y/Z: approx. 1100mm/700mm/800mm, bale weight: approx. 120kg-180kg. Machine dimensions X/Y/Z: approx. 1550mm/950mm/2000mm, weight: approx. 850kg. Documentation available. On-site inspection is possible.
more
Shredder-Rapid-8045-KU used
Shredder
Rapid 8045-KU
Germany
1994
used
on request
INNO27751
Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible.
more
Insulating-Glass-Production-Line-Forel-2000 used
Insulating Glass Production Line
Forel 2000
Germany
1996
used
on request
INNO27691
Two identical Forel multi-pane insulating glass production lines with fixed spacer and Swiggel are available. Glass production options: 2-fold/3-fold, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible.
more
Knife-Gate-Valve-Watergates-DN500 used
Knife-Gate Valve
Watergates DN500
Germany
2020
used
on request
INNO27675
Six (6) identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible.
more
Shredder-Herbold-SMS45-60 used
Shredder
Herbold SMS45/60
Germany
2003
used
on request
INNO27651
Inlet dimensions X/Y: 600mm/580mm, rotor width: 850mm, rotor diameter: 450mm, rotor blades: 3, power: 75kW, weight: approx. 3000kg. Available from middle of November 2024.
more
Glass-Edge-Processing-Machine-Bevelloni-B-75-CN used
Glass Edge Processing Machine
Bevelloni B 75 CN
Germany
2004
used
on request
INNO27635
Number of spindles: 7, min. glass dimensions X/Y: 40mm/40mm, min. glass height: 35mm, glass thickness range: 3mm-20mm, bevel angle: 3°-45°, max. bevel size: 50mm, working speed: 0.5m-4.1m/min. The machine is missing maintenance, the rear chain is defective and various minor repairs are required. An on-site inspection is possible.
more
Glass-Cutting-Table-Bottero-100BBM used
Glass Cutting Table
Bottero 100BBM
Germany
2001
used
on request
INNO26087
A Bottero glass cutting machine is available. Cutting thickness range: 2mm-19mm, max. glass dimensions X/Y: 3650mm/2750mm, weight: approx. 1650kg. On-site inspection is possible.
more
Glass-Cutting-Machine-4jet-Microtech-Diamond-M used
Glass Cutting Machine
4jet Microtech Diamond M
Germany
2020
used
on request
INNO27594
Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available.
more
Shredder-Neue-Herbold-BM-170-260 used
Shredder
Neue Herbold BM 170/260
Germany
2016
used
on request
INNO27548
Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.
more
Glass-Cutting-Machine-Hegla-Easycut-II used
Glass Cutting Machine
Hegla Easycut II
Germany
2000
used
on request
INNO27496
Max. Glass sheet dimensions X/Y: 6000mm/3210mm, cutting accuracy: +/-0.5mm, cutting speed: 150m/min, weight: approx. 900kg. Documentation available. On-site inspection is possible.
more
Welding-System-Schwalbach-HP1500-HG7000S used
Welding System
Schwalbach HP1500/HG7000S
Germany
unknown
used
on request
INNO27489
A Schwalbach high-frequency welding system for dielectric heating for the glass industry is available. Connected load: 17kVA, generator output: 7kW, frequency: 2712MHz, transmitter tube: 2xTB6/4000, high voltage: 7000V DC, overload cut-off from: 2100mA. Documentation available. On-site inspection is possible.
more
Glass-Lifting-Machine-Hegla-VCMP used
Glass Lifting Machine
Hegla VCMP
Germany
1992
used
on request
INNO27470
A Hegla glazing manipulator with its own vacuum supply and 4x suction plates is available. Load capacity: 500kg, weight: 270kg, operating hours: approx. 3000h. Including 2x additional plug-in suction arms, mounting bowl, transport frame and equipment case. Documentation available. On-site inspection is possible.
more
Glass-Lifting-Machine-Barbaric-B3-UL-G-K-250 used
Glass Lifting Machine
Barbaric B3 UL G K 250
Germany
2013
used
on request
INNO27469
A Barbaric glass lifting machine is available. Load capacity: 250kg, max. glass dimensions X/Y: 3200mm/2500mm, operating hours: approx. 100h. Without chain hoist and on-site vacuum pump. Documentation available. On-site inspection is possible.
more
Glass-Lifting-Machine-Pannkoke-7211-DS used
Glass Lifting Machine
Pannkoke 7211-DS
Germany
2004
used
on request
INNO27468
A Pannkoke glass lifting machine with 2 independent vacuum circuits is available. Suction cup type: 388, suction cup diameter: approx. 300mm, min. glass thickness: 4mm, max. suction cup heat tolerance: 80°C, number of suction cups: 2x6, load capacity: 600kg. Machine dimensions X/Y: approx. 2300mm/1400mm, weight: approx. 160kg. Documentation available. On-site inspection is possible.
more
Glass-Drilling-Machine-Busetti-Gio-1250 used
Glass Drilling Machine
Busetti Gio 1250
Germany
2010
used
on request
INNO27461
A double-sided Busetti glass drilling machine is available. Drilling heads: 2, drilling dimensions X/Y: 1250mm/1450mm, min. drilling diameter: 3mm, max. drilling diameter both drills/with top drill: 130mm/220mm, speed: 4000rpm, max. glass thickness: 38mm. Machine dimensions X/Y/Z: approx. 4500mm/2050mm/2300mm, weight: approx. 1700kg. An on-site inspection is possible.
more
Roller-Conveyor-Oven-Dorn-and-Schröder-ROHO-70-10-600 used
Roller Conveyor Oven
Dorn & Schröder ROHO-70/10/600
Germany
2020
used
on request
INNO27444
A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible.
more
CNC-Glass-Machining-Center-Cms-Tecnometal-B7 used
CNC Glass Machining Center
Cms Tecnometal B7
Germany
2008
used
on request
INNO27398
Glass dimensions X/Y min./max.: 80mm x 150mm/2700mm x 6580mm, dimensions X/Y/Z: approx. 5800mm/7300mm/3200mm. Documentation available.
more
Innovac used machines from Germany Our Program
Agricultural-machines 1
Automation-technology 54
Beverage-filling-technology 27
Complete-production-lines 3
Construction-machinery 25
Energy-management 150
Food-processing-and-beverage 128
Material-storage 69
Materials-handling-technology 60
Measurement-and-testing 57
Medical-equipment 7
Metal-processing-machines 891
Mining 1
Office-equipment 1
Other-machines 75
Packaging-machines 202
Pharmaceutical-and-cosmetics 20
Plastics-processing-machines 193
Printing-machines 66
Process-equipment-and-chemistry 109
Packaging-material-machinery 76
Robotics 41
Surplus-goods 4
Textile-machinery 96
Utility-vehicles 9
Woodworking-machines 94