Used Plastics processing machines from Germany

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Injection moulding machinery [1 - 20 of 100]

Injection Moulding Machine

Arburg 270M 500-210

Germany

1994

used

on request

INNO26844

Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.

Injection Moulding Machine

Arburg Allrounder 270M 350-90

Germany

1994

used

on request

INNO26843

Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.

Injection Moulding Machine

Arburg Allrounder 570C 2000-675

Germany

1999

used

on request

INNO26838

Screw diameter: 55mm, max. injection weight: 434g, max. injection pressure: 1720bar, clamping force: 2200kN, min. installation height: 250mm. Dimension between the platens: 900mm, max. opening stroke: 750mm, centering bore nozzle side/ejector side: 125mm/125mm. On-site inspection is possible.

Injection Moulding Machine

Arburg Allrounder 420C 1300-350

Germany

1998

used

on request

INNO26835

Clamping force: 1300kN, approach force: 50kN, opening force: 35kN/increased 350kN, opening stroke: 500mm, mold installation height: 250mm. Distance between platens: 750mm, clear column distance: 420mm x 420mm, mold platens: 605mm x 605mm. Movable mold half weight: 650kg, ejector force: 40kN, ejector stroke: 175mm. Screw diameter: 35mm/40mm/45mm, effective screw length: 23/20/18 L/D, max. screw stroke: 145mm, stroke volume: 139cm³/182cm³/230cm³. Shot weight (hp): 127/166/210g, injection pressure: 2500bar/2000bar/1650bar, injection flow: 128/168/212cm³/s, back pressure: 350bar/160bar, screw circumferential speed: 47/53/60m/min. Oil filling: 235l, dimensions X/Y/Z: approx. 4350mm/1600mm/1800mm, weight: approx. 4900kg. Including conveyor belt, Geiger handling, carousel, temperature control units. Operating hours pump/automatic operation: approx. 89000h/83000h. Documentation available. On-site inspection is possible.

Handling Robot

Arburg Multilift H m. B-Achse

Germany

2019

used

on request

INNO26826

Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.

Injection Moulding Machine

Arburg Allrounder 680 CB 650-170

Germany

2018

used

on request

INNO26744

Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Krauss Maffei KM 200-700 C2

Germany

2002

used

on request

INNO26718

Clamping force: 2000kN, drive power: 37kW, injection volume: 377cm³, melt pressure: 1600bar. Screw diameter: 50mm, control: MC4 32-bit microprocessor control, nozzle type: R 15. Dimensions X/Y/Z: approx. 5160mm/1900mm/2240mm, weight: approx. 10000kg. Without oil filling and material conveyor/material hopper. Available from August, 2024. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Engel Victory 5160H/860W/500

Germany

2017

used

on request

INNO26706

Injection molding machine: clamping force: 5000kN, opening stroke: 1109mm, max. mold weight per plate/total: 5300kg/10600kg, drying time: 4.15s. Injection units: Unit 1: screw diameter: 90mm, injection flow: 623cm³/s, max. injection pressure: 2000bar. Unit 2: Screw diameter: 50mm, injection flow: 295cm³/s, max. injection pressure: 2000bar. Weight (without oil): Clamping unit: 33350 kg, injection unit: 9000 kg. ENGEL Viper 20 robot: max. manipulation weight: 17kg, max. vertical workpiece size: 600mm, travel X/Y/Z: 700mm/1300mm/3320mm. Total height of robot and machine: 4250mm, compact C-axis: pneumatic, torque: 30Nm, range: 0°-90°. Documentation available.

Injection Moulding Machine

Netstal Synergy 3500-1700

Germany

2004

used

on request

INNO26692

Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. Operating hours: 83111 (as of: 14.04.2021). Buyer must provide oil filling after purchase. Material conveyor not included. Available from 30.07.2024. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Arbrug Allrounder 320KS 700-100

Germany

2003

used

on request

INNO26649

max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg.

Injection Moulding Machine

Kraussmaffei 650-5700CM

Germany

2001

used

on request

INNO26641

Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm.

Injection Moulding Machine

Engel victory 200/50 spex

Germany

2019

used

on request

INNO26494

Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.

Injection Moulding Machine

Engel INSERT 1050H/200 SINGLE

Germany

2018

used

on request

INNO26455

Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.

Injection Moulding Machine

Arburg ALLROUNDER 900T 400-210

Germany

1997

used

on request

INNO26372

Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.

Injection Moulding Machine

Arburg ALLROUNDER SELECTA 320S 350-150

Germany

2001

used

on request

INNO26360

Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible.

Injection Moulding Machine

Ferromatik Milacron K-TEC 250S

Germany

2002

used

on request

INNO26356

There are two Ferromatik Milacron K-TEC 250 available, clamping force: 2500kN, injection pressure: 2258bar, stroke volume: 441cm³, engine power: 55kW, weight: 16.5t, operating hours of machine 1: 84,365h, on-site inspection is possible, without accessories.

Injection Moulding Machine

Arburg ALLROUNDER SELECTA 320S 350-60

Germany

2003

used

on request

INNO26352

Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.

Injection Moulding Machine

Arburg ALLROUNDER 270S 400-170

Germany

2011

used

on request

INNO26338

Operational hours counter: 62,699h, with documentation, without accessories.

Injection Moulding Machine

Arburg ALLROUNDER 320S 350-150

Germany

2005

used

on request

INNO26337

Operational hours counter: 85,318h, with documentation, without accessories.

Injection Moulding Machine

Arburg ALLROUNDER 370U 500-170

Germany

2007

used

on request

INNO26336

Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.