Innovac GmbH Used machines from Germany
Innovac used-machines Measurement and testing [41 - 60 of 65]
CNC-Coordinate-Measuring-Machine-Mora-Mytos used
CNC Coordinate Measuring Machine
Mora Mytos
Germany
2005
used
on request
INNO26935
Measuring range X/Y/Z: 3000mm/1800mm/6000mm, measuring accuracy: ±(2.5 + L/300)µm. On-site inspection is possible.
Profilometer-Keyence-VR-5200 used
Profilometer
Keyence VR-5200
Germany
2019
used
on request
INNO26798
Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm.
Optical-Measurement-System-Keyence-IM-6125 used
Optical Measurement System
Keyence IM-6125
Germany
unknown
used
on request
INNO26781
Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision).
Climate-test-chamber-Feutron-Klimasimulation-KPK-900l used
Climate test chamber
Feutron Klimasimulation KPK 900l
Germany
2008
used
on request
INNO26599
Test chamber volume: 900 l, Temperature range: -40°C - +100°C, humidity range: 10 - 98, Test chamber weight: 750kg, refrigeration system weight: 480kg. Refrigerant, refrigerant quantity and operating pressure: R134a/0.8kg/18bar, R507/4.0kg/27bar, R23/1.0kg/27bar
3D-Coordinate-Measuring-Machine-Keyence-XM-M1200 used
3D Coordinate Measuring Machine
Keyence XM-M1200
Germany
2020
used
on request
INNO26562
X-axis: +/-100mm, measuring range: 600x300x200mm, max. workpiece weight: 25kg, the machine is as good as new, an on-site inspection is possible.
Pump-Test-Stand-Etewe-Gmbh used
Pump Test Stand
Etewe Gmbh
Germany
2006
used
on request
INNO26540
Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible.
Universal-Crack-Detection-Machine-K+d-Flux-technic used
Universal Crack Detection Machine
K+d Flux-technic
Germany
unknown
used
on request
INNO26245
Functions according to the magnetic particle technology, with documentation and accessories, an inspection is possible.
Rheometer-Göttfert-ELASTOGRAPH-67.85 used
Rheometer
Göttfert ELASTOGRAPH 67.85
Germany
1987
used
on request
INNO26128
Rotorless rotational shear vulcameter with filter mats, calibration weights, new stepper motor and documentation. The device has been recalibrated and the chamber renewed, control unit has been replaced with a standard PC connection, on-site inspection is possible.
Web-Inspection-System-Bst-webscope-B60-10-G used
Web Inspection System
Bst webscope B60-10-G
Germany
2008
used
on request
INNO26095
There are two identical machines available, year of construction machine 1/ 2: 2003/ 2008, with documentation, were part of a flexo printing machine Fischer & Krecke 16S/10.
Optical-3D-Coordinate-Measuring-Machine-Keyence-VL-500 used
Optical 3D Coordinate Measuring Machine
Keyence VL-500
Germany
2022
used
on request
INNO25751
Connected load: 200VA, with documentation, the device was hardly used.
Helium-Leak-Tester-Gmg-Automation used
Helium Leak Tester
Gmg Automation
Germany
1997
used
on request
INNO25543
Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation.
Shielding-Box-Emc-technik-and-Consulting-Gmbh used
Shielding Box
Emc-technik & Consulting Gmbh
Germany
2012
used
on request
INNO25475
Shielding box for electromagnetic compatibility, length: 728mm, width: 520mm, height: 520mm, with full absorber lining (ferrite absorber), 10x feed-through filters (banana sockets), BNC feed-through, cold device feed-through (filtered), Sub-D feed-through (filtered), waveguide feed-through for optical cables, double EMC seal, antenna feed-through (conduit feed-through), shielding attenuation and two gas pressure springs.
3D-Structured-Light-Scanner-Hexagon-smartSCAN-HE-RE8-LED used
3D Structured Light Scanner
Hexagon smartSCAN-HE RE8 LED
Germany
2017
used
on request
INNO25321
Includes measuring field S-075, calibration plate S, strip projection system LED (blue), 128 LP, lenses, 2x high-resolution 8. 0 MPixel digital camera with GigE interface, 3296x2472 pixels, lenses, filters, optoLINKII controller with USB interface, 10m cable, upgrade to integrated rack computer Intel® Xeon® processor, 64bit, 32GB RAM, 1TB SATA HDD, DVD +/-rw, graphics card, OPTOCAT measurement and evaluation software for Windows, laser pointer, flight case, closed system housing, M rotary/swivel unit with three-jaw chuck, certification for optical measurement system and system acceptance according to VDI / VDE 2634, the machine was hardly used.
Hardness-Testing-Machine-Otto-Wolpert-werke-DiaTestor-3a used
Hardness Testing Machine
Otto Wolpert-werke DiaTestor 3a
Germany
1973
used
on request
INNO25083
Max. test load range: 750kg, with documentation and accessories.
Optical-3D-Coordinate-Measuring-Machine-Keyence-VL-570 used
Optical 3D Coordinate Measuring Machine
Keyence VL-570
Germany
2022
used
on request
INNO25029
Measuring area: 70-300xH 50-H 200mm, max. workpiece weight: 50kg, with Foundation VL-550, dongle and licensed software, without computer, the device was hardly used.
Temperature-Test-Chamber-Vötsch-VT-3050 used
Temperature Test Chamber
Vötsch VT 3050
Germany
2007
used
on request
INNO24882
Capacity: 500l, temperature range: -30 to 100°C, inner dimensions: 590x710x1250mm, nominal power: 1.9kW, length: 1030mm, width: 710mm, height: 1955mm, with documentation.
Coordinate-Measuring-Machine-Hexagon-Global-Silver-Performance-07.10.07 used
Coordinate Measuring Machine
Hexagon Global Silver Performance 07.10.07
Germany
2014
used
on request
INNO24268
X-travel: 700mm, y-travel: 1000mm, z-travel: 660mm, resolution: 0.039μm, max. load: 900kg, measuring plate height: 600mm, weight: 1.255t, operational hours counter: ca. 10,000h, with documentation.
UV-VIS-Spectrophotometer-Beckmann-DU-640 used
UV-VIS Spectrophotometer
Beckmann DU 640
Germany
1997
used
on request
INNO23861
Including documentation.
Material-Testing-Machine-Netzsch-DMA-GABO-Eplexor-4000N used
Material Testing Machine
Netzsch DMA GABO Eplexor 4000N
Germany
2009
used
on request
INNO23733
Max. static force: 4000N, max. dynamic force: +/-4000N, temperature range: -160 to 500°C, including accessories, was last calibrated in 2020.
Rheometer-Alpha-Technologies-MDR-2000E used
Rheometer
Alpha Technologies MDR 2000E
Germany
1997
used
on request
INNO23598
Oscillating frequency: 100 cycle/min, sample volume: 4.5cm³, including documentation, without accessories, was maintained and calibrated regularly.