▷ Used automation technology from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Automation technology / Placement technology

Assembly systems 1 Manipulators 2 Other machinery 6 Placement technology 43 Positioning systems 1 Sorting device 1 Steerings 5

Innovac used-machines

Placement technology [1 - 20 of 43]

Pick and Place System

Dima HP-100

Germany

unknown

used

on request

INNO29019

Cycle time: 1.16s/QFP with Area CCD camera, 0. 85s/chip with Closed Loop Electromechanical Alignment, optimal placement rate: 3125 on IPC 9850 with Area SCC & LCC cameras, 4200 on IPC 9850 with CLEA, nominal placement rate: 2500-3500cph (components per hour), processable component types: 0201-Chip, MELF, SOT, SOIC, TSOP, TNT, PLCC, QFP, BGA, µBGA, LCC, field size: 42x42mm, fine pitch: Up to 0.4mm (16 mil), Tool change station: 12 nozzle positions, Heads: single gantry with two independently controlled pipettes, Assembly accuracy (X/Y) 3σ: 50µ with Area CCD camera,100µ with Closed Loop Electromechanical Alignment, PCB dimensions (X/Y): 30-330x30-450mm, PCB alignment: fiducial detection by ESI CorrectPlace® incl. Teach-in for drill holes or unusual contours, loading and alignment time: approx. 2.8s, number of axes: 2, length: 1700mm, width: 1500mm, height: 2200mm, weight: 450kg without feeder. On-site inspection is possible.

Pick and Place System

Dima Modulo MP-100

Germany

unknown

used

on request

INNO29018

Platinum thickness: 0.5-4.5mm, component height: top max. 16mm, bottom max. 30mm, components: Chip, MELF, SOT, SOIC, TSOP, PLCC, QFP, BGA, LCC, µBGA etc., Incremental axes X: 0.001mm, Y: 0.001mm, Z: 0.02mm, theta: 0.045°, connected load: 2500W, operating temperature: 18-30°C, control: microprocessor control with CAN interface, operated on PC with Windows® 7, vision system: ESI CorePlace®, automatic board alignment, complete component identification, inspection of solder pads, pin positions, component position, BGA ball count etc., weight: 700kg. On-site inspection is possible.

Automated Optical Inspection System

Vi Technology 5K SPECTRO

Germany

unknown

used

on request

INNO29017

Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible.

Infrared Reflow Oven

Sab Innotec ECO 160 IR

Germany

1994

used

on request

INNO28887

An IR reflow oven SAB is available. Voltage: 220V, current: 10A, power: 2.2kW, machine dimensions X/Y/Z: approx. 670mm/350mm/300mm, weight: approx. 30kg. On-site inspection is possible.

Soldering System

Smt 1.2 TC N2

Germany

unknown

used

on request

INNO28745

A full convection reflow soldering system SMT with nitrogen support is available. Heating zones: 2, heating length: 1080mm, max. process temperature: 300°C, cooling type: air cooling, cooling length: 550mm, heating and stabilization time: 15min, conveyor width: 300mm, conveyor speed: 2m/min, max. component height: 80mm, total output: 15kW, machine dimensions X/Y/Z: approx. 2400mm/1000mm/1450mm. On-site inspection is possible.

Soldering Cabin

Pötter PK-IAT-L 1400

Germany

2011

used

on request

INNO28601

A soldering booth including extraction is available. Documentation available. On-site inspection is possible.

Optical Exposure System

Automatech/altix ZG 357/386

Germany

2004

used

on request

INNO28323

Two Automa-Tech (Altix) exposure machines are available for the PCB industry. 1) ZG 357, running direction: right-left, min. board dimensions X/Y: 530mm/385mm, max. board dimensions X/Y: 630mm/530mm, film dimensions X/Y: 685.8mm/584.2mm, UV burner power: 2x10kW, exposure: double-sided, cameras: 2/side, machine dimensions X/Y/Z: approx. 3650mm/2600mm/2450mm. 2) Contact platesetter ZG 386, min. plate dimensions X/Y/Z: 525mm/351mm/0.5mm, max. plate dimensions X/Y/Z: 635mm/533mm/4.5mm. The machine has a comprehensive and large spare parts package. Numerous spare parts are also available for the ZG series (not this machine). Documentation available. On-site inspection is possible. Individual sale of the machines or spare parts is possible.

Press-in Machine

Tyco P300

Germany

2001

used

on request

INNO28060

A Tyco (TE Connectivity) press-fit machine (insertion machine) is available. Insertion dimensions X/Y: 300mm/310mm, max. speed: 150mm/s, max. number of insertions: 15 million/year, insertion capacity: 4000-5000 pins/h. Machine dimensions X/Y/Z: approx. 2400mm/1600mm/1450mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.

Pick-And-Place Machine

Mechatronika M10V

Germany

2013

used

on request

INNO28008

A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible.

Coating System

Dage Prima V7

Germany

2013

used

on request

INNO27750

Basket dimensions X/Y/Z: 300mm/250mm/200mm, bath capacity: 52l/80kg, European card throughput: approx. 280/h, machine dimensions X/Y/Z: approx. 1000mm/750mm/1050mm. Including automatic drain, fill level monitoring, cooling zone, collection container for water/solvent: 0.5l/5l. Inspection of the cooling system is necessary. Documentation available. On-site inspection is possible. Expected to be available from mid-October 2024.

Placement System

Neoden S1

Germany

2019

used

on request

INNO27708

Heads: 4, Feeder slots: 58, Positioning accuracy: +/-0.01mm, Production output: 6000CPH, Camera field of view X/Y at 20µm resolution: 48mm/40mm, Machine dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection is possible.

Wave Soldering System

Seho System 8040 PCS

Germany

unknown

used

on request

INNO27642

Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available.

Reflow Oven

Smt 1.7 TC N2

Germany

2005

used

on request

INNO27641

Text: Heating zones: 7, transport width: 400mm, transport speed: 1500mm/min, nitrogen consumption at 250°C: approx. 15m³/h, nitrogen purity: 99.999%, cooling zones: 2, machine dimensions X/Y/Z: approx. 3300mm/1400mm/1500mm, weight: approx. 2000kg.

Automated Optical Inspection Machine

Göpel Opticon BasicLine NP

Germany

2009

used

on request

INNO27266

Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available.

SMT Feeder

Feeder Rüttelfeeder/8mm-44mm

Germany

unknown

used

on request

INNO27262

Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages.

Placement System

Zevatech/juki/dek FS730/FM740/TR4NEZ/265

Germany

1995

used

on request

INNO27261

A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available.

Placement System

Panasonic RH 3

Germany

unknown

used

on request

INNO27012

Production speed: 25000/h, placement accuracy: 0.065mm, component dimensions: 2.5mm and 5mm. Loading and unloading of PCBs must be done manually due to a defect. 380V transformer included.

Magazine Loader And Unloader

Panasonic MBS M/MBSF M

Germany

2002

used

on request

INNO27011

A magazine loading unit and a magazine unloading unit for the Panasonic Panasert MB series are available. Including a 230V transformer.

Wave Soldering System

Seho 2340-LRT

Germany

2005

used

on request

INNO27015

The system has been switched off since 2014. Until then, all maintenance was carried out. Soldering width: 400mm, preheating zones: 6, convection heating length: 2000mm, soldering wave width: 450mm, max. soldering wave height with F-nozzle: 8mm. Total length: approx. 30m, infeed conveyor with stacker for return transport: approx. 14m, fluxer and soldering module: approx. 11m, outfeed conveyor with stacker for return transport: approx. 7m. Documentation available. Including 350kg solder, 3 loading tables, 40 outer frames and some spare parts. On-site inspection is possible.

Wave Soldering System

Vitronics Soltec Delta Wave 6622CC

Germany

2006

used

on request

INNO27013

Chip shaft and main shaft can be switched separately. Alloy: SN100C, heating zones: 3 (including 1 convection), primary shaft: lambda shaft, dimensions X/Y/Z: approx. 3810mm/1400mm/2000mm, weight: approx. 2500kg. Defects: automatic height adjustment of the crucible, traces of corrosion on the crucible, manual activation of convection. Available from October 2024.