Innovac GmbH Used machines from Germany
Innovac used-machines Presses [41 - 60 of 96]
Punch-Press-Edel-Stanzprofi-400 used
Punch Press
Edel Stanzprofi 400
Germany
unknown
used
on request
INNO27294
Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.
Press-Wmw-KD2320 used
Press
Wmw KD2320
Germany
1971
used
on request
INNO27269
Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.
Mechanical-Press-Kaiser-V400WR used
Mechanical Press
Kaiser V400WR
Germany
2003
used
on request
INNO27242
Press force: 400t, stroke rate: 15-120/min, stroke adjustment (defective): 30mm-210mm, fixed stroke: 186mm, ram adjustment: 150mm, overall height: 350mm-576mm, max. belt width: 600mm, table dimensions X/Y: 2000mm/1400mm, shuttle tables on rails: Blue (220mm) and red (250mm), parts conveyor belt X/Y: 800mm/1800mm, dimensions X/Y: 20000mm/6000mm, operating hours: 32000h. Including conveyor system and change trolley. Documentation available. On-site inspection is possible.
Hydraulic-Press-Wmw-PYE-63-S-1M used
Hydraulic Press
Wmw PYE 63 S/1M
Germany
unknown
used
on request
INNO27164
Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg.
Hydraulic-Frame-Press-Knuth-HRP-150 used
Hydraulic Frame Press
Knuth HRP-150
Germany
1996
used
on request
INNO27163
Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg.
CNC-Press-Brake-Eht-EHPS-20-35 used
CNC Press Brake
Eht EHPS 20-35
Germany
1995
used
on request
INNO27107
Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.
Folding-Press-Machine-Strojáreň-Piesok-CK-2000-2A used
Folding Press Machine
Strojáreň Piesok CK-2000/2A
Germany
1998
used
on request
INNO27070
A Strojáreň Piesok CK-2000/2A manual folding machine is available. Bending angle: 0°-135°, max. working width: 2040mm, max. material thickness: 2mm, max. upper beam stroke: 85mm, max. folding beam adjustment: 80mm, bending process: manual with eccentric weight support. Dimensions X/Y/Z: 3700mm/1250mm/450mm, weight: approx. 1700kg.
Hydraulic-Press-Wanzke-HVZ-160-S used
Hydraulic Press
Wanzke HVZ 160/S
Germany
1998
used
on request
INNO26995
Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible.
Eccentric-Press-Colombo-Agostino-110.B.350 used
Eccentric Press
Colombo Agostino 110.B.350
Germany
1991
used
on request
INNO26982
Press force: 3500kN, table dimensions X/Y: 1000mm/800mm, lateral passage width: 560mm, stroke: 200mm, installation height: 460mm, stroke rate: 25-75strokes/min, ram adjustment: 160mm, weight: 23000kg. On-site inspection is possible. Available from July 2024.
Hydraulic-Press-Dunkes-HZS-125 used
Hydraulic Press
Dunkes HZS 125
Germany
2000
used
on request
INNO26947
Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible.
CNC-Press-Brake-Trumpf-TrumaBend-V170 used
CNC Press Brake
Trumpf TrumaBend V170
Germany
1997
used
on request
INNO26911
Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available.
Punch-Press-Edel-Stanzmaster-40 used
Punch Press
Edel Stanzmaster 40
Germany
1985
used
on request
INNO26882
Pressing force: 400kN, throat depth: 520mm, dimensions X/Y/Z: 1800mm/1000mm/1900mm, weight: approx. 2600kg. Documentation available.
Hydraulic-Press-Dunkes-HZ-63 used
Hydraulic Press
Dunkes HZ 63
Germany
1991
used
on request
INNO26831
Pressing force: 630kN/63t, operating pressure: 270bar, stroke: 400mm, installation height: 600mm, throat depth: 280mm, oil filling: approx. 650l, weight: approx. 5200kg. Documentation available. On-site inspection is possible.
Screw-Press-Gwf-DFN-100 used
Screw Press
Gwf DFN 100
Germany
1992
used
on request
INNO26810
Compressive force: 1000kN/100t, lifting speed: 25/min, ram stroke: 230mm, power requirement: 5.5kW, safety distance: 640mm, stopping time: 400ms, weight: 4600kg. Has been overhauled once.
Folding-Press-Machine-Reinhardt-RAS-74.30 used
Folding Press Machine
Reinhardt RAS 74.30
Germany
unknown
used
on request
INNO26790
Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg.
Cold-Forming-Press-Fm-130 used
Cold Forming Press
Fm 130
Germany
unknown
used
on request
INNO26727
Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024.
Knuckle-Joint-Press-Gräbener-GKMP-360 used
Knuckle-Joint Press
Gräbener GKMP 360
Germany
1984
used
on request
INNO26640
Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg.
Press-Brake-Lvd-PPE-160-40-MNC-95 used
Press Brake
Lvd PPE 160/40 MNC 95
Germany
1992
used
on request
INNO26565
Working width: 4000mm, pressing force: 160t, control: MNC 95/C, connected load: 18kW, length: 4100mm, width: 1900mm, height: 3100mm, weight: 14.5t, including tools, the documentation is partially available, the laser system requires maintenance.
Extrusion-Press-Collin used
Extrusion Press
Collin
Germany
unknown
used
on request
INNO26545
Pressing force: 1400t, press-out length flat: 1500-12,000mm, recipient 1: max block diameter: 185mm, max block length: 350mm, recipient 2: max block diameter: 150mm, max block length: 580mm, max. operating pressure: 240bar, connected load: 535kW, retrofit 2001 includes power increase to 1000t, new piston rods ground and chrome-plated. Operating pressure: 240bar, connected load: 535kW, year of construction is original 1915, retrofit 2001 includes power increase from 1000t to 1400t, new piston rods in ground and chrome-plated design, installation of a new shear, completely new mould slide, hydraulics: renewal of the control, regulating and safety valves. Completely new pipework, completely new control cabinet, control panel, length measuring system and control system (Siemens S7-300), with documentation, an on-site inspection is possible.
Hydraulic-Four-Column-Press-Lauffer-VA-400 used
Hydraulic Four-Column Press
Lauffer VA 400
Germany
1992
used
on request
INNO26344
Max. pressing force: 4000kN, max. stroke: 500mm, installation height: 1100mm, table dimensions: 1200x800mm, max. working pressure: 300bar, weight: 23t, with documentation, was maintained regularly, an on-site inspection is possible.