Guillotine Shear

Georg Eckart

Germany

1990

used

on request

INNO27915

An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible.

more

CNC Machining Center

Heller MCH 250

Germany

2006

used

on request

INNO27911

Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025.

more

Lathe

Wmw DLZ 1000 III

Germany

1956

used

on request

INNO27905

Turning length: 8000mm, turning diameter: 1000mm, bed width: 800mm, spindle bore: 72mm, speed: 1800rpm, spindle power: 19kW, weight: 15,600kg. On-site inspection is possible.

more

Welding Machine

Fronius/soyer/aro Vario Synergetic 4000-2/BMK-10LC/AR.01

Germany

2007

used

on request

INNO27903

There are 3x welding machines available. 1) MIG/MAG welding machine Fronius Vario Synergic 4000-2 G/W, year of construction: 2007. Includes hose package, wire feeder VR 3300, and pressure regulator. Without gas cylinder. 2) Stud welding machine Soyer BMK-10LC, year of construction: 1998. 3) Spot welding machine Aro AR.01, year of construction: 2000. Includes jib crane with balancer and cooling. Documentation available. On-site inspection is possible.

more

Superfinish Machine

Supfina SUPERMAT 808 D4 F2

Germany

2007

used

on request

INNO27901

Weight: 11t, with documentation and control cabinet. Has been regularly serviced. On-site inspection is possible.

more

CNC Internal Cylindrical Grinding Machine

Bahmüller 129-1-5 CNC

Germany

2005

used

on request

INNO27900

Connected load: 28kVA, with documentation, control cabinet and Kraft Bauer water fine spray extinguishing system. Has been regularly serviced. On-site inspection is possible. Already dismantled and stored.

more

CNC Internal Cylindrical Grinding Machine

Voumard 100 CNC

Germany

2000

used

on request

INNO27899

X-axis: 130mm, Z-axis: 130mm, max. speed internal grinding spindle: 2x 90,000/min, speed workpiece spindle: 1-2000/min, control: Fanuc 16i, length: 1910mm, width: 1478mm, height: 2060mm, weight: 2t. With Stotz Scanning measuring system, central suction system, vibrator, swivel loader, membrane chuck and documentation. On-site inspection is possible, has been regularly serviced.

more

CNC Internal Cylindrical Grinding Machine

Voumard 100 CNC

Germany

2000

used

on request

INNO27898

X-axis: 130mm, Z-axis: 130mm, max. speed internal grinding spindle: 2x 90,000/min, speed workpiece spindle: 1-2000/min, control: Fanuc 16i, length: 1910mm, width: 1478mm, height: 2060mm, weight: 2t. With measuring system Stotz Scanning MS_1271W002-G05, central suction, vibrator, swivel loader, membrane chuck and documentation. On-site inspection is possible, has been regularly serviced.

more

CNC Internal Cylindrical Grinding Machine

Voumard 100 CNC

Germany

1999

used

on request

INNO27897

X-axis: 130mm, Z-axis: 130mm, max. speed internal grinding spindle: 2x 90,000/min, speed workpiece spindle: 1-2000/min, control: Fanuc 16i, length: 1910mm, width: 1478mm, height: 2060mm, weight: 2t. With measuring system Stotz Scanning MS_1271W002-G05, central suction, vibrator, swivel loader, membrane chuck and documentation. On-site inspection is possible, has been regularly serviced.

more

CNC Machining Center

Okuma MA-600HB

Germany

2007

used

on request

INNO27895

X-axis: 1000mm, Y-axis: 900mm, Z-axis: 1000mm, B-axis: 360x 1°, max. spindle speed: 6000/min, pallet dimensions: 630x630mm, number of pallets: 6, rapid traverse: 30m/min, feed rate: 12m/min, number of tool positions: 150, tool holder: MAS BT 50, control: OSP-P200M, length: 10,500mm, width: 5400mm, weight: 27t, operating hours NC running time/ spindle/ cutting time: 49,943/ 47,199/ 41,434h. Has been regularly serviced, with 1° B-axis, ConSep system, measuring probe, pallet station, cooling system, documentation and tool breakage monitoring, without holders, tools or spare parts. On-site inspection is possible.

more

CNC Drilling Machine

Fritz Heckert BFT

Germany

unknown

used

on request

INNO27892

Control: Heidenhain, connected load: 33kW, weight: 9.7t, with manual, rails and control cabinet. Was converted to CNC a few years ago. The machine needs to be overhauled. An on-site inspection is possible.

more

Flame Cutting Machine

Esab SUPRAREX SXE-P (D)

Germany

1999

used

on request

INNO27891

Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible.

more

Welding Machine

Heberle/hbs/lorch/mig O Mat/castolin+eutectic cd System 2010/SEW 200N/MIG O MAT WIGSTAR 250i

Germany

unknown

used

on request

INNO27872

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

more

Mitre Saw

Eisele VMSII PV PROD

Germany

1982

used

on request

INNO27868

Saw blade diameter: 275mm, cutting range round (90°): 100mm, cutting range flat (90°): 160mm/80mm, speed: 40rpm - 80rpm. On-site inspection is possible.

more

Center Lathe

Ferdinand C. Weipert W 630e

Germany

1969

used

on request

INNO27867

Center width: 1500mm, swing diameter over bed: 570mm, swing diameter over support: 370mm, bed width: 480mm, spindle bore: 235mm, max. spindle speed: 710/min, drive power: 10kW, weight: approx. 5.8t. On-site inspection is possible.

more

CNC Universal Milling Machine

Kunzmann WF 4/3

Germany

2001

used

on request

INNO27864

X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000/min, quill stroke: 60mm, max. feed: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not functional, errors occur repeatedly: Problems with the movement monitoring of the Z and Y axes, gross positioning error on the Z axis, faults when moving the control housing. The operational readiness controller is missing and appears continuously when switching on. A reference run is possible after several attempts. The spindle gear is worn out. On-site inspection is possible.

more

CNC Profile Machining Center

Elumatec SBZ 151

Germany

2008

used

on request

INNO27863

An Elumatec rod processing center for profile processing in the window or metal industry is available. Max. Machining length without/with end face machining: 7400mm/7100mm, profile length: 7300mm, machine dimensions X/Y/Z: approx. 13300mm/5000mm/3000mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.

more

CNC EDM-Machine

Charmilles Robofil 300

Germany

unknown

used

on request

INNO27862

Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible.

more

CNC Machining Center

Hurco VMX 40

Germany

2001

used

on request

INNO27860

Travel X/Y/Z: 1020mm/510mm/610mm, speed: 10000rpm, rapid traverse X/Y/Z: 24m/24m/20m/min, table spindle nose distance: 150mm/760mm, spindle mount: SK-A40, spindle power: 15kW, T-slot width: 18mm, T-slot distance: 100mm, tool positions: 24, table dimensions X/Y: 1220mm/510mm, max. table load: 750kg, machine weight: approx. 5500kg. The machine was equipped with a new spindle, a new tool changer and a new servo motor by Hurco Service 3000 hours ago. Including approx. 850l new deep-hole drilling oil Rhenus UA 19S, 2x deep-hole crown drills with a diameter of 50mm, various thread ring gauges, mandrels and calibers. Documentation available. On-site inspection is possible.

more

Circular Saw

Eisele VMSII-033

Germany

1982

used

on request

INNO27859

Saw blade diameter: 275mm, power: 1.9kW, speed: 80rpm, cutting range (flat): 140mm/70mm, cutting range (miter): 100mm/70mm, max. pipe cutting capacity: 3 inches, solid material cutting capacity: 80mm/60mm, square material cutting capacity: 50mm/50mm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1500mm, weight: approx. 300kg. On-site inspection is possible.

more

All Offers / Metal processing machines