Eccentric Press

Bihler GRM 50

Germany

unknown

used

on request

INNO28020

Stroke rate: 250/min, press force: 250kN, stroke: 16mm. Including press with 2 slides, reel, welding device with cooling unit and automatic nut feeder. Documentation available. On-site inspection is possible.

more

CNC Laser Cutting Machine

Trumpf TLC 1050

Germany

2000

used

on request

INNO28019

Laser power: 4kW (4000W), travel X/Y/Z: 4000mm/1500mm/500mm, C-axis: 360°, table dimensions X/Y: 3000mm/1500mm, connected load: 90kVA, machine dimensions X/Y/Z: approx. 9000mm/5000mm/3000mm, weight: approx. 10000kg, laser hours: 34879h. The resonator is defective. Documentation available. On-site inspection is possible.

more

CNC Fine Blanking Press

Smg/kohler HFA 4000/VRM65

Germany

1988

used

on request

INNO28012

A punching line with coil reel, straightening station and press is available. 1) Fine blanking press SMG HFA 4000, year of manufacture: 1988, press force: 4000kN, ring punch force: 320kN-3200kN, counterholder force: 130kN-1300kN, ram stroke: 30mm-150mm, tool clamping area X/Y top/bottom: 900mm x 900mm / 910mm x 1350mm, max. tool height: 410mm, number of strokes: 40/min, weight: approx. 31000kg, control: Siemens S5. 2) Coil reel Kohler. 3) Kohler VRM.65.260/21-H3500 straightening station, year of manufacture: 1991, including loading trolley, units, feed roller, Raziol Ebade oiling unit, running platform, switch cabinets and oil mist extraction system. Documentation available. On-site inspection is possible.

more

Eccentric Fineblanking Press

Schaal SEP25

Germany

1981

used

on request

INNO28011

A punching line with reel, strip straightening station and fineblanking punch is available. 1) Eccentric fineblanking die-cutter Schaal SEP25, year of manufacture: 1981, pressing force: 25t, stroke: 8mm-60mm, upright width: 460mm, lateral upright clearance: 145mm, installation height: 270mm, table dimensions X/Y: 450mm/480mm, table height: 960mm, ram surface X/Y: 280mm/250mm. Including feed roller. 2) Coil decoiler GSW LHM300/1000, year of construction: 1998, load capacity: 300kg. 3) Coil reel, load capacity: 300kg. 4) Coil straightening station Dreher 1633/BV, year of manufacture: 1982, documentation available. On-site inspection is possible.

more

Double-Column High-Speed Press

Schuler A2-80

Germany

unknown

used

on request

INNO28010

Pressing force: 80t, ram stroke: 25mm, stroke: 100mm-500mm. Including strap infeed unit and Beutler collabroll/straightening station. Documentation available. On-site inspection is possible. The machine has an eccentric design.

more

CNC Tool Grinding Machine

Smp Numaffut CA6

Germany

2001

used

on request

INNO28009

A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.

more

CNC Machining Center

Hurco VMX 50

Germany

2006

used

on request

INNO28004

Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.

more

Upright Drilling Machine

Webo GRADUA 60

Germany

1973

used

on request

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

more

CNC Machining Center

Stama MC 726 MT

Germany

2006

used

on request

INNO27999

A CNC 5-axis vertical machining center Stama is available. Travel X/Y/Z: 800mm/400mm/350mm, speed: 12,000 rpm, spindle power: 30kW, spindle holder: HSK-63, tool positions: 42, max. workpiece weight: 180kg. Machine dimensions X/Y/Z: approx. 3900mm/3500mm/3300mm, weight: approx. 6600kg, control: Siemens 840D, operating hours: 33,813h. Including measuring probe, bar loader, cooling and filter system. Documentation available. On-site inspection is possible.

more

Continuous Cleaning Machine

Franke DRB-300/100/5000 III-RST

Germany

2006

used

on request

INNO27997

A continuous spray cleaning system F/R/A/N/K/E is available. Cleaning tank volume: 800l, rinsing tank volume: 400l, recommended temperature cleaning/rinsing: 60°C/65°C, heating capacity cleaning/rinsing/drying: 27kW/12kW/9kW, max. temperature cleaning/rinsing/drying: 80°C/80°C/120°C, filter fineness cleaning/rinsing: 1mm/1mm, connected load: 56kW. Including an oil separator plate phase separator (PPT). Documentation available. On-site inspection is possible.

more

CNC Precision Lathe

Weiler DA 260 X 1000

Germany

2016

used

on request

INNO27987

Center height: 260mm, center width: 1000mm, swing diameter over bed/face slide: 535mm/345mm, speed: 1500rpm. Spindle bore: 71mm, spindle diameter: 100mm, tool holder: 25mm/25mm, drive power: 7.5kW. Number of feeds: 66, longitudinal feed: 4mm/revolution, face feed: 2mm/revolution. Including Fagor numerical position indicator, 200mm Röhm lathe chuck with base and top jaws, 3x soft top jaws, 2x BD 25120 lathe tool holder, BH 32130 lathe tool holder, Röhm center punch MK5 and a set of mounting plates. Documentation available. On-site inspection is possible.

more

Single-Column Eccentric Press

Ambold PEEV 40.1

Germany

1979

used

on request

INNO27983

Pressing force: 400kN, installation height: 400mm, stroke: 44mm, max. stroke rate: 130/min, connected load: 3kW, weight: 2.7t. On-site inspection is possible.

more

Single-Column Eccentric Press

Ambold EVSP 55

Germany

1986

used

on request

INNO27982

Pressing: 550kN, installation height: 380mm, stroke: 45mm, max. stroke rate: 120/min, connected load: 4.8kW, weight: 3.5t. On-site inspection is possible.

more

NC Powder Coating Plant

Wma Warsteiner Montage Und Anlagentechnik

Germany

2010

used

on request

INNO27980

Curing oven dimensions: 4000x21000mm. With residual moisture dryer, Gema powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible.

more

NC Powder Coating Plant

Wma Warsteiner Montage Und Anlagentechnik

Germany

2003

used

on request

INNO27978

Three-chamber pre-treatment dimensions: 3600x1200x1900mm, washing entrance dimensions: 700x1500mm, manual painting booth dimensions: 800x1700mm, cycle time: 6min. With residual moisture dryer, Gema Optiflex 2 powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible. Available in February 2025.

more

CNC Universal Milling Machine

Deckel FP4-60

Germany

1999

used

on request

INNO27977

Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible.

more

CNC Laser Cutting Machine

Amada FLC-3015 AJ

Germany

2013

used

on request

INNO27976

X-axis: 3070mm, Y-axis: 1550mm, Z-axis: 100mm, max. workpiece weight: 920kg, cutting capacity VA: 0.5-4mm, steel: 0.5-4mm, aluminum: 0.5-5mm, control: AMNC/PC, connected load: 18.4kVA, length: 9300mm, width: 2900mm, height: 2000mm, weight: 12t. With laser source AJ2000 2kW, automatic material tower ASLUL300F1, LKI Wöldman, compact dust extractor and programming software. On-site inspection is possible. Available in February 2025.

more

CNC Profile Machining Center

Tekna TK 426/3

Germany

1998

used

on request

INNO27975

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

more

CNC Press Brake

Amada HD 1003 NT ATC ASTRO

Germany

2014

used

on request

INNO27974

Pressing force: 1000kN, working length: 3110mm, max. bending speed: 10mm/s, opening width: 470mm, connected load: 10kVA, length: 5980mm, width: 3075mm, height: 2915mm, weight: 10.5t, with automatic tool changer, extensive tool set (approx. 160 segments up to V6-V25), flexible backgauge, AutoToolChanger (ATC), 4 manipulators for short set-up times, servo-hydraulic drive and documentation. On-site inspection is possible. Available in February 2025.

more

Drill Grinding Machine

Cuoghi Afiilatrici APE 40

Germany

2002

used

on request

INNO27973

Sanding range: 2mm-40mm, number of cutters: 12, head angle swivel range: 40°-180°, max. sanding disc diameter: 200mm/125mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 800mm/750mm/1300mm, weight: approx. 170kg. No concentricity of the hand-operated 6-jaw chuck, gearbox jams sporadically and the chuck jaws do not clamp the workpieces centrally. Documentation available. An on-site inspection is possible.

more

All Offers / Metal processing machines