▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [21 - 40 of 877]

CNC Cycle Lathe

Romi M 420

Germany

unknown

used

on request

INNO28091

A Romi CNC cycle lathe is available. Center height: 215mm, center width: 1000mm, turning diameter over bed/face slide: 430mm/204mm, spindle bore: 53mm, rapid traverse X/Z: 7.5m/min / 10m/min, spindle speed: 4000rpm, main spindle motor power: 7.5kW, tool positions: 8, machine dimensions X/Y/Z: approx. 2800mm/1300mm/2000mm, weight: approx. 3000kg, control: GE Fanuc series 21i-TB. Documentation available. On-site inspection is possible.

CNC Milling Machine

Geiss FZ 2000x1000

Germany

2007

used

on request

INNO28088

A Geiss CNC 5-axis lathe is available. Connected load: 22.62kW, travel X/Y/Z: 2400mm/1400mm/760mm, B-axis: 210°, C-axis: 520°, rapid traverse X/Y/Z: 75m/min, 75m/min, 70m/min, rapid traverse B-/C-axis: 20880°/min. Speed: 40000rpm, tool holder: HSK-32 E, spindle power: 9kW, tool positions: 12, weight: approx. 35000kg, control: Siemens 840DI. Including center partition for two-station operation, Busch 110m³/h vacuum pump, Rittal SK 3320 cooling unit, measuring probe and knee switch for the vacuum. Documentation available. On-site inspection is possible.

CNC Waterjet Cutting Machine

Stako Trium WPC

Germany

2016

used

on request

INNO28087

Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible.

Assembly Table

Ruchser RU-MSA

Germany

2005

used

on request

INNO28086

There are 8 identical Ruchser assembly tables available. Height adjustment: 900mm-1100mm, load capacity: 2400kg. On-site inspection is possible.

Circular Saw

Behringer VMS 400-A

Germany

2013

used

on request

INNO28078

A Behringer automatic circular saw with NC-controlled material feed is available. Cutting range flat: 90°: 200mm/120mm, 45°: 140mm/120mm, 30°: 100mm/100mm. Cutting range square: 90°: 120mm, 45°: 120mm, 30°: 100mm. Cutting range round: 90°: 140mm, 45°: 140mm, 30°: 110mm. Feed length: 800mm, drive power: 2.6kW, speed: 68rpm, saw blade diameter: 400mm, working height: 920mm, saw blade feed: hydraulic, material feed: ball screw, clamping device: hydraulic. Machine dimensions X/Y/Z: approx. 3100mm/1500mm/2000mm, weight: approx. 900kg. Documentation available. On-site inspection is possible.

Remaining Stock

Klopp/müller/reinhardt FWU 13-6/MPS2/RAS 52.80

Germany

1970

used

on request

INNO28076

Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.

Deep Hole Drilling Machine

Heyligenstaedt

Germany

1951

used

on request

INNO28075

A Heyligenstaedt deep-hole drilling machine is available. Speed: 1120 rpm, turning diameter: 282 mm. The wedge bar chuck is of high quality and relatively new. An on-site inspection is possible.

Mesh Welding System

Gad RE40/R33/R31

Germany

2009

used

on request

INNO28062

A complete GAD lattice girder welding system with Wafios wire straightening and cutting machines is available. 1) GAD mesh welding machine, year of manufacture: 2009, mesh width: 270mm-3000mm, mesh length: 600mm-3500mm, line wire diameter: 2.5mm-8mm, line wire pitch single rod/double rod: 25mm/50mm, cross wire diameter: 2.5mm-8mm, cross wire pitch: 15mm, transformers: 3x, machine dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. 2) Wire straightening and cutting machine Wafios RE 40, year of construction: 2021, wire diameter: 3mm-10mm, cutting capacity: 120 rods/min, cutting capacity with fixed stop and continuous cut: 220 rods/min. 3) Wafios R33 wire straightening and cutting machine, year of manufacture: 2011, wire diameter: 1.5mm-7mm, cutting capacity: 160-320 cuts/min. 4) Wafios R31, year of manufacture: 1997, wire diameter: 1.5mm-7mm, cutting capacity: 160-270 cuts/min. System production capacity: approx. 1250kg/h, total system dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. All wire straightening and cutting machines including reel. Documentation available. On-site inspection is possible.

CNC Lathe

Boehringer VDF 250C

Germany

1992

used

on request

INNO28061

Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025.

Surface Lathe

Zerbst DP5

Germany

1966

used

on request

INNO28053

Construction size: 1400/3150, center height above bed: 710mm, center width: 3150mm, face plate diameter: 1400mm, net weight: approx. 15700kg. The drive motor of the machine was renewed in 2023. Documentation available. On-site inspection is possible.

CNC Horizontal Drilling and Milling Machine

Dörries Scharmann Heavycut 1.2/TDV4

Germany

1979

used

on request

INNO28052

Travel X/Y/Z: 9000mm/2500mm/2500mm, travel W/V: 600mm/700mm, B-axis: +/-27 revolutions, displacement: 700m, speed: 1000rpm, rapid traverse: 6000mm/min. Spindle diameter: 150mm, spindle mount: SK50. Clamping table height: 950mm, clamping table dimensions X/Y: 2500mm/2500mm, table adjustment: 2500mm, max. table load: 25000kg, control: Siemens Sinumerik 840C. Including oil cooling unit. Documentation available. On-site inspection is possible.

Coping Robot

Kaltenbach KC 1200

Germany

2010

used

on request

INNO28050

With notching robot Kuka + transport system T13 / M150, equipped with oxy-fuel torch for steel profiles, sheets, rectangular tubes. Number of axes notching system: 8, transport system infeed length set up: approx. 13.5m (1 long version still available), transport system outfeed length set up: approx. 10.0m (4 standard trestles still available), electronics for cross conveyor infeed and outfeed: completely included in the control cabinet (without cross conveyor), safety fencing: only partially set up (complete fencing available), safety light barriers: not set up (completely available). With documentation, an on-site inspection is possible.

CNC Press Brake

Trumpf TrumaBend V85S

Germany

1999

used

on request

INNO28049

Pressing force: 850kN, bending length: 2550mm, stroke: 365mm, operating pressure: 340bar, connected load: 14kVA. Machine dimensions X/Y/Z: approx. 4000mm/2200mm/2400mm, weight: approx. 10000kg, operating hours: 4544h, strokes: 5.749.457. Documentation available. On-site inspection is possible.

CNC Turning- and Milling Center

Gildemeister Twin 65

Germany

2004

used

on request

INNO28048

A Gildemeister CNC double-spindle turning and milling center is available. Center height: 1288mm, center width: 900mm, max. turning length: 300mm, max. turning diameter over bed/face slide/crank: 250mm. Spindle diameter: 120mm, spindle bore: 79mm, max. quill stroke: 300mm, quill taper: MK4. Machine dimensions X/Y/Z: approx. 6200mm/4700mm/2500mm, weight: approx. 10000kg, control: Siemens Sinumerik 840D, operating hours: 72590h. Including cooling lubricant system and bar loader Breuning ILS RBK. Without cutting tools. Documentation available. On-site inspection is possible.

Wet Abrasive Blasting System

Torbo/ Schneider/ Oks torbo L

Germany

2004

used

on request

INNO28046

A sandblaster with associated air compressor, compressed air tank and 22 bags of sand are available. (1) Wet Abrasive Blasting System torbo L, abrasive consumption: 14-384l/h, length: 660mm, width: 830mm, height: 1240mm, weight: approx. 185kg. (2) Schneider Air-Master AM 22-10 B1 screw compressor, volume flow: 3040l/min, final compression pressure: 10bar, connected load: 22kW. (3) OKS compressed air tank, capacity: 1000l, max. operating pressure: 11bar. With 22 bags of sand, 25 kg each, on-site inspection is possible.

CNC Double Spindle Lathe

Takisawa TT-500 GD

Germany

2018

used

on request

INNO28044

A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible.

CNC Band Saw

Kasto SSB 260 VA-CC

Germany

1998

used

on request

INNO28043

Cutting capacity round/rectangular: 260mm/10 x 10 inches, saw blade length: 4115mm, saw blade width: 34mm, saw blade speed: 125m/min, machine dimensions X/Y/Z: approx. 2100mm/1900mm/2100mm, weight: approx. 2200kg, control: Kasto. Including discharge roller table. Without infeed roller table. Documentation available. On-site inspection is possible.

CNC Surface Grinding Machine

Aba PSM1250

Germany

1991

used

on request

INNO28042

Longitudinal movement: 2000mm, sanding length: 1000mm, sanding width: 280mm, rotary indexing table diameter: 1250mm, interchangeable table plates: 2, plate dimensions X/Y: 800mm/400mm, control: Siemens Sinumerik. Including cabin enclosure, abrasive supply, hydraulic system, LTA spray mist extraction system, safety enclosure, profile grinding unit and dynamic balancing unit. Documentation available. On-site inspection is possible.

Tool Milling Machine

Deckel FP3 2027

Germany

unknown

used

on request

INNO28041

An NC-controlled universal tool milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/340mm, table dimensions X/Y: 700mm/460mm, speed: 4000rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, spindle mount: SK40, drive power: 5.5kW. Machine dimensions X/Y/Z: approx. 2000mm/1400mm/1800mm, weight: approx. 1900kg, control: Dialog 4, including Heidenhain path control, machine vice, Repar2 FBB spray protection device, year of manufacture: 2016, documentation available. On-site inspection is possible.

Surface Grinding Machine

Mägerle FPA-10/FPA-12

Germany

unknown

used

on request

INNO28040

There are 3 almost identical Mägerle surface grinding machines available. 1/2) Mägerle FPA-10-S4, sanding dimensions X/Y/Z: 1000mm/320mm/365mm, table dimensions X/Y: 1050mm/240mm, machine dimensions X/Y/Z: approx. 3400mm/1600mm/2700mm, weight: approx. 3400kg. 3) Mägerle FPA-12-S6:2, sanding length: 1200mm, sanding width: 370mm, table dimensions X/Y: 1250mm/240mm, machine dimensions X/Y/Z: approx. 3700mm/1800mm/2500mm, weight: approx. 4000kg, operating hours: 1540h. All machines including coolant supply. Documentation available. On-site inspection is possible.