▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [361 - 380 of 873]

Die Casting Machine

Idra OL 300 ST DG

Germany

1982

used

on request

INNO27036

Clamping force: 300t, mold clamping area X/Y: 880mm/880mm, plunger stroke: 400mm, column diameter: 100mm, ejector force: 18t. Height adjustment: 200mm, clamping surface between the columns X/Y: 555mm/555mm, mold height min./max.: 200mm/650mm, mold opening stroke: 540mm, max. casting weight: 5.2kg. Dimensions X/Y/Z: approx. 6150mm/1950mm/2615mm, weight: approx. 16000kg. This machine is a spare parts carrier. Controls, electrics and paintwork must be renewed. On-site inspection is possible.

Chamber Furnace

Lac PKRC 130/95

Germany

2018

used

on request

INNO27031

T. max.: 950°C, T. max. long-term operation: 850°C, volume: 69l, internal dimensions X/Y/Z: approx. 372mm/635mm/303mm, power: 21kW, max. floor load: 200kg, dimensions X/Y/Z: 1635mm/1930mm/1670mm, weight: approx. 950kg. Documentation available. On-site inspection is possible.

CNC Laser Cutting Machine

Trumpf TLC 6005

Germany

2001

used

on request

INNO27030

Laser power: 4000W, working range X/Y/Z: 4000mm/2500mm/1000mm, laser device: TLF 4000 turbo, laser type: CO2, operating hours: 95778h, beam on: 19423h, laser hours: 119092h, weight: approx. 12000kg. Water change according to Trump specifications. The laser optics and geometry are checked weekly. Cooling unit included. One of two compressors on the cooling unit and the front doors (Landert drive) are defective.

Aluminum Wet Separator

Keller VDN-AS 22.4

Germany

2002

used

on request

INNO27028

Nominal volume flow: 22400V, drive power: 37kW, diameter: 1800mm, extraction volume: 27000m³/h. Important parts such as the cyclone were replaced in 2022. Documentation available.

Horizontal Boring Machine

Wagner WBX 1003

Germany

1987

used

on request

INNO27026

A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available.

Belt Drop Hammer

Gustav Wolf

Germany

unknown

used

on request

INNO27022

A Gustav Wolf belt drop hammer is available.

Billet Shear

Peddinghaus 214/200

Germany

unknown

used

on request

INNO27021

A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg.

Laser Cutting Machine

Bystronic ByVention 2,2kW

Germany

2008

used

on request

INNO27025

Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg.

Oven System

Ipsen SH-3.18x153-E

Germany

1986

used

on request

INNO27024

A furnace system consisting of an (1) Ipsen pusher-type furnace with shaking trough, a (2) WMV Apparatebau cleaning system and a (3) Kohnle tempering furnace is available. 1) Year of construction: 1986, working temperature range: 850°C-890°C, heating: electric, quenching: oil including oil cooling (via air), defects: Furnace lining and muffle. 2) Year of construction: 2011, drum diameter: 500mm, processes: spinning/washing/rinsing/drying, including transfer unit. 3) Year of construction: 1986, working temperature range: 400°C-500°C, heating: electric. Including large package of spare parts, especially for the Ipsen oven.

Profile Hardening System

Elotherm Elomat V/M/180/3

Germany

unknown

used

on request

INNO27020

A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils.

Band Saw

Kaltenbach KB 380 NA

Germany

1998

used

on request

INNO27010

Working width: 380mm, max. angle adjustment: 180°, cutting speed: 96m/min, dimensions X/Y/Z: 3100mm/2200mm/1850mm, weight: 3100kg. Without infeed and outfeed roller conveyor. Including 10 originally packed saw bands.

CNC Machining Center

Hommel Unverzagt UVA 725 Plus

Germany

2010

used

on request

INNO27008

Travel X/Y/Z: 725mm/460mm/460mm, speed: 10000rpm, tool holder: SK40, tool magazine: 24 places, max. tool diameter/length: 100mm/300mm, max. tool weight: 7kg, tool change time: 2s, table dimensions X/Y: 760mm/420mm, max. table load: 400kg. Dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 3600kg, control: Heidenhain TNC 620. Defects: Compact inverter with integrated controller and PLC, door switch, both work area lamps, X-axis ball screw and roller bearings. Including chip conveyor. Documentation available. On-site inspection is possible.

Milling Machine

Wmw FUW250/IV

Germany

unknown

used

on request

INNO27005

Table size X/Y: 630mm/345mm, table clamping surface X/Y: 700mm/300mm, travel X/Y/Z: 400mm/250mm/300mm, spindle mount: SK40, speed: 2240rpm, feed X/Y/Z: 1250mm/min, distance spindle-table: 400mm, quill stroke: 80mm, drive power: 5.5kW. Dimensions X/Y/Z: approx. 2300mm/2650mm/2300mm, weight: approx. 1700kg. On-site inspection is possible.

Hydraulic Press

Wanzke HVZ 160/S

Germany

1998

used

on request

INNO26995

Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible.

CNC 5-Axis Machining Centre

Grob BZ 500

Germany

2004

used

on request

INNO26993

Travel X/Y/Z: 630mm/630mm/500mm, speed: 15000rpm, table size X/Y: 500mm/500mm, max. workpiece height: 930mm, max. workpiece weight: 800kg, spindle type: HSK63, spindle motor: 32kW, tool positions: 180, dimensions X/Y/Z: approx. 5500mm/4000mm/4000mm, weight: approx. 16000kg. Including tools, hydraulic unit. Defects: Gearbox, drive motor, energy chains. Documentation available.

CNC 4 Axis Machining Centre

Stama MC 526 Compact

Germany

2007

used

on request

INNO26987

Travel X/Y/Z: 1000mm/400mm/360mm, speed: 12000rpm, feed X/Y/Z: 10000mm/min, rapid traverse X/Y/Z: 45m/min, feed force X/Y/Z: 4000N/4000N/8000N. Spindle bearing diameter: 65mm, max. tool diameter/length: 125mm/250mm, tool holder: HSK63, max. torque: 60Nm, max. milling capacity: 350cm³, max. drilling diameter: 32mm, max. thread diameter: M30. Dimensions X/Y/Z: approx. 3600mm/3800mm/3300mm, weight: approx. 6100kg, control: Fanuc 18i MB. Hydraulic unit included. Documentation available. An on-site inspection is possible.

CNC 4 Axis Machining Centre

Stama MC 526 Compact

Germany

2007

used

on request

INNO26986

Travel X/Y/Z: 1000mm/400mm/360mm, speed: 12000rpm, feed X/Y/Z: 10000mm/min, rapid traverse X/Y/Z: 45m/min, feed force X/Y/Z: 4000N/4000N/8000N. Spindle bearing diameter: 65mm, max. tool diameter/length: 125mm/250mm, tool holder: HSK63, max. torque: 60Nm, max. milling capacity: 350cm³, max. drilling diameter: 32mm, max. thread diameter: M30. Dimensions X/Y/Z: approx. 3600mm/3800mm/3300mm, weight: approx. 6100kg, control: Fanuc 18i MB. Hydraulic unit included. Documentation available. An on-site inspection is possible.

Plate Shear

Eht TSS 4-60

Germany

1999

used

on request

INNO26985

Cutting length: 6000mm, max. material thickness: 4mm, blade length: 6000mm, passage from side stop to front stop: 200mm, top blade cutting angle: 1°, backgauge range: 10mm-1000mm, max. adjustment speed: 70mm/s. Dimensions X/Y/Z: approx. 6800mm/3500mm/2300mm, weight: approx. 21000kg. An on-site inspection is possible.

Eccentric Press

Colombo Agostino 110.B.350

Germany

1991

used

on request

INNO26982

Press force: 3500kN, table dimensions X/Y: 1000mm/800mm, lateral passage width: 560mm, stroke: 200mm, installation height: 460mm, stroke rate: 25-75strokes/min, ram adjustment: 160mm, weight: 23000kg. On-site inspection is possible. Available from July 2024.

CNC 5-Axis Machining Centre

Heller MCH 450

Germany

2008

used

on request

INNO26979

Travel X/Y/Z: 1600mm/1500mm/1250mm, table dimensions X/Y: 800mm/1000mm, round pallet storage: 4+1 with clamping hydraulics, speed: 6000rpm, feed X/Y/Z: 40000mm/min, rapid traverse X/Y/Z: 40000mm/min, max. workpiece weight: 2500kg, tool magazine: 405 places/SK50/set-up station. Including 70bar high-pressure coolant system, emulsion mist extraction system. On-site inspection is possible. Available from January 2025.