▷ Used food processing machines from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Food processing machines, Beverage [1 - 20 of 128]

Water Jet Cutting Machine

Eas Duojet

Germany

2022

used

on request

INNO28312

An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.

Continuous Fryer

Göztepe KM 968

Germany

2018

used

on request

INNO28188

Two identical Göztepe belt fryers are available for vegetables (onions, potatoes, nuts, etc.). Working length: 6800mm, working width: 700mm, inlet height: 1280mm, outlet height: 1060mm, working temperature: 180°C, plastic belt length and width bottom: 14000mm/720mm, plastic belt length and width top: 8500mm/720mm. Machine dimensions X/Y/Z: approx. 6900mm/1800mm/3500mm, total output: 135kW. Documentation available. On-site inspection is possible.

Continuous Cooling Machine

Göztepe ST 618

Germany

2019

used

on request

INNO28187

A Göztepe belt cooling machine (cooling tunnel), which was used to extend product life, is available. Motor power: 4kW, inlet height: 1670mm, outlet height: 1150mm, base distance: 2000mm, working length: 8500mm, machine dimensions X/Y/Z: approx. 8600mm/1900mm/2600mm. Documentation available. On-site inspection is possible.

Continuous Washing Machine

Göztepe ÖY 320

Germany

2019

used

on request

INNO28186

A belt washing machine is available for pre-washing and feeding food into downstream machines. Input height: 1000mm, output height: 1000mm, machine dimensions X/Y/Z: approx. 4600mm/1500mm/1500mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.

Screening Machine

Göztepe SM 990

Germany

2018

used

on request

INNO28185

Three identical screening machines with blowers are available. Working width: 700mm, foot spacing: 950mm, screen dimensions X/Y: 1450mm/700mm, vibrator power: 2x 0.65kW, machine dimensions X/Y/Z: approx. 2500mm/1050mm/2850mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.

Band Blancheur

Göztepe BB 961

Germany

2018

used

on request

INNO28184

Working width: 707mm, working height inlet/outlet: 1220mm/1100mm, working temperature: 60°C, material: stainless steel, belt material: plastic, belt length and width bottom: 14000mm/820mm, belt length and width top: 8500mm/820mm, reducer power: 1.5kW, pump power: 2.2kW, additional bridge reducer power: 0.55kW, machine dimensions X/Y/Z: approx. 6750mm/1810mm/3500mm. Documentation available. On-site inspection is possible.

Milk Clarifier

Gea Westfalia MSA 90-01-076

Germany

unknown

used

on request

INNO28175

A GEA clarifier (skimmer) is available. Bowl speed: 5920 rpm, material density: 1.1 kg/dm³, production capacity: approx. 10000 l/h, motor power: approx. 18 kW, construction material: stainless steel 316, documentation available. On-site inspection is possible.

Forming, Filling and Portioning Machine

Rheon Cornucopia KN 400

Germany

1997

used

on request

INNO28144

A Rheon encrusting machine for dough and bakery products is available. Product weight range: 10g-300g, production capacity: 10-60 pieces/min, belt speed: 1.3m-22m/min, max. product length: 500mm, max. extrusion capacity: 360kg. Including various accessories. Documentation available. On-site inspection is possible.

Dough Divider

Glimek SD180XLE

Germany

2008

used

on request

INNO28117

A Glimek suction dough dividing and weighing machine is available. Weight range: 180g-2300g, weighing and dividing capacity: 750-1800 pieces/h, hopper volume: 90l, connected load: 1.1kW. Machine dimensions X/Y/Z: approx. 1150mm/670mm/1650mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Brewhouse

Germany

2016

used

on request

INNO28089

A complete brewhouse including fermentation is available. Production capacity: 500l/h, space requirement X/Y: 8000mm/2000mm. 1) Brew mill, volume: 500l. 2) Mash kettle with steam or hot water, material: stainless steel, insulation: V2A. 3) Wort kettle and lauter tun with steam or hot water, material inside/outside: stainless steel/copper, without external boiler. 4) Whirlpool, material: stainless steel. 5) 2-stage plate cooler, insulation: V2A. 6) 6x cylindroconical fermentation tanks (ZKGs), volume: 1200 l, with jacket cooling. 7) Hot water generator. 8) Refrigeration system. Production capacity: 500l per 8 hours. The brewhouse is brand new and unused, but 8 years old. The brewhouse needs to be piped. Documentation available. On-site inspection is possible.

Belt Roasting System

Ceselsan CS 2500 Plus

Germany

2023

used

on request

INNO28074

A new belt roasting machine for nuts in the food industry is available. Fuel: diesel/electricity/gas/LPG, output: 2kW, machine dimensions X/Y/Z: approx. 3600mm/1900mm/1950mm, operating hours: 31h. Roasting capacity per hour: hazelnut kernels: 160kg, shelled peanuts: 150kg, shelled peanuts: 35kg, shelled pistachios: 90kg, sunflower seeds: 70kg, pumpkin seeds: 70kg, almonds: 120kg, cashew nuts: 150kg, chickpeas: 120kg. Including salt kettle with a capacity of 35kg and fully automatic high-pressure belt washer. Documentation available. On-site inspection is possible.

Continuous Baking Oven

Silex DB SF-410/1150

Germany

2010

used

on request

INNO28000

A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible.

Dosing System

Velcorin II G B5 MID 50 C/VDT 50 L

Germany

2007

used

on request

INNO27990

Two Velcorin cold sterilization systems for the bevarage industry are available. 1) Velcorin II G B5 MID 50 C, year of manufacture: 2007, min./max. flow rate: 7000l/23000l/h, recommended min. beverage quantity for high dosing accuracy: 85l/h, max. directional flow rate: 504hl/h, dosing pump type: MTV 2.13/17, dosing accuracy: 20ml Velcorin/hl, sterilizing agent: dimethyl dicarbonate (DMDC, E242). Max. Beverage line pressure: 6.5bar, max. beverage line temperature: 150°C, max. power consumption: 2000VA, operating pressure: 4bar-8bar. 2) A defective Velcorin VDT 50 L. The screen and the vent screw are defective on this machine and cannot be repaired. The machine is available as a defective spare parts carrier. Both machines have touch panels. Documentation available. On-site inspection is possible.

X-Ray Metal Detector

Mettler Toledo X36

Germany

2019

used

on request

INNO27989

Max. output: 1000 products/min, compressed air connection: 550kPA, length: 2100mm, weight: 770kg. With CE declaration, operating instructions, technical manual, technical drawing, Excel spare parts list and circuit diagram. Has been regularly serviced, an on-site inspection is possible.

Pasteuriser

Gea Finnah 6700/045

Germany

1998

used

on request

INNO27884

Throughput: 2500l/h, compressed air connection: 6bar, control: Siemens S5. With fittings, valve manifold, pumps and APV Gaulin Z4P-0.5BF high-pressure piston pump, program printout available, tank integrated in system, additional pipe bundle available on pallet. System is functional and still under voltage, documentation available. On-site inspection is possible.

Rotary Lever Mixer

Mbk Ellrich DHM 220/300L

Germany

unknown

used

on request

INNO27854

Material: stainless steel, container volume: 300 l, speed: 25-26 rpm, power: 1.5 kW. The machine has been completely overhauled. On-site inspection is possible.

Dough Cutting and Weighing Machine

Seewer/rondo Doge STC1 A0

Germany

2002

used

on request

INNO27853

Application: bread and pastry products, belt length: 1250mm, belt width: 610mm, dough thickness range: 0mm-35mm, dough weight range: 200g-2400g. On-site inspection is possible.

Laser Sorter

Best HELIUS

Germany

2008

used

on request

INNO27834

Sorting system for foreign object detection, suitable for salads and leafy vegetables, consists of two infeed vibrators and a sorting unit, compressed air connection: 10 bar, water connection: 3 bar, connected load: 3 kVA, with spare parts, has been regularly serviced by the manufacturer, on-site inspection is possible, not under power.

Slicer

Weber 404-A-200

Germany

2011

used

on request

INNO27816

A Weber CCS 404-A-200 slicer is available. Cutting capacity: 600 slices/min, cutting thickness: 0.1mm-50mm, max. product length: 1200mm, max. product width: 330mm, max. product height: 135mm, conveyor belt length: approx. 2100mm, portioning belt length: approx. 190mm, control belt length: approx. 485mm, cutter head: circular cutter head HSK 98, portioning unit: CCU, product carrier: automatic with synchronized belt. Including swivel mechanism (rocker) and spare parts. Documentation available. On-site inspection is possible. Expected to be available from December 2024.

Combi Steamer

Eloma Multimax A20-11KT

Germany

2006

used

on request

INNO27803

Output: 45kW, capacity: 20 GN 1/1 racks, operating pressure: 200kPa-600kPa, permissible flow temperature: 50°C. The front cover of the machine has been damaged during transportation and has fallen off. On-site inspection is possible.