Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Plastics processing machines
Blow moulding machinery 2 Calenders and rolling mills 1 Deep drawing machinery 1 Dryer 5 Extruder and extrusion lines 15 Foil processing machinery 1 Forms and tools 2 Granulating plants 3 Handling equipment and robots 1 Heating and cooling units 7 Injection moulding machinery 80 Mills 9 Other machinery 6 Peripheral equipment 2 Plastcompactors 1 Polyurethane processing machinery 3 Presses 5 Printing machinery 1 Processing and follow-on 11 Thermoforming machinery 1 Welding machinery 12 Winder 2 Window production machinery 10
Innovac used-machines Plastics processing machines [61 - 80 of 181]
Injection-Moulding-Machine-Krauss-Maffei-KM-250-1400-C1 used
Injection Moulding Machine
Krauss Maffei KM 250-1400 C1
Germany
2002
used
on request
INNO27744
Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.
more
Vacuum-Forming-Machine-Geiss-DU-2400-x-1200-T9 used
Vacuum Forming Machine
Geiss DU 2400 x 1200 T9
Germany
2011
used
on request
INNO27738
Max. mold dimensions X/Y: 2400mm/1200mm, max. plate dimensions X/Y: 2350mm/1150mm, max. mold installation height: 900mm, total connected load: 285.3kW, rated operating current: 413A, heating capacity top + bottom: 277.7kW, air consumption: 1600l/cycle. Machine dimensions X/Y/Z: approx. 4500mm/4700mm/4700mm, weight: approx. 12500kg, control: Siemens with OP 35, documentation available. On-site inspection is possible.
more
Calendaring-Machine used
Calendaring Machine
Germany
unknown
used
on request
INNO27726
A calendaring machine is available. Working width: approx. 1200mm. New rollers, a new toothed belt and a new motor have been fitted to the machine. New rubberized rollers, a new motor and the air system have been installed in the haul-off. An on-site inspection is possible.
more
Injection-Moulding-Machine-Engel-arburg-kraus-Maffei used
Injection Moulding Machine
Engel/arburg/kraus Maffei
Germany
2020
used
on request
INNO27694
A total of 13 injection molding machines from various manufacturers are available. 1) Engel VC 200/80 Electric, year of manufacture: 2007, operating hours: 53,375h. 2) Engel VC 310/120 Electric, year of manufacture: 2007, operating hours: 43,708h. 3) Krauss-Maffei 650-300 c2, year of manufacture: 1996, operating hours: 51,938h, including Geiger handling robot. 4) Krauss-Maffei 300/1900 C1, year of manufacture: 2000, operating hours: 57,686h. 5) DEMAG ergotech 150-440 compact, year of manufacture: 1998, operating hours: 89,790h. 6) Arburg Allrounder 420 A 1000-400, year of manufacture: 2006, operating hours: 31,182h, including Geiger handling robot. 7) Arburg Allrounder 370 A 600-170, year of manufacture: 2009, operating hours: 36,946h, including Geiger handling robot. 8) Krauss-Maffei 300/200 CX, year of manufacture: 2011, operating hours: 17,070h, including Krauss Maffei handling robot. 9) Krauss-Maffei 110-340 c1, year of manufacture: 1995, operating hours: approx. 60,000h. 10) Krauss-Maffei 150-700 c1, year of manufacture: 2002, operating hours: 62,148h. 11) Krauss-Maffei 200-1400 CX, year of manufacture: 2016, operating hours: 26808h, including Kuka handling robot. 12) Arburg HDrive 470 H 1000-400, year of manufacture: 2009, operating hours: 38415h. 13) Arburg Golden E. 420 C 1000-290, year of manufacture: 2015, operating hours: 24337h. Documentation available. On-site inspection is possible. Expected to be available from April 2025.
more
Injection-Moulding-Machine-Krauss-Maffei-420-110-650-850 used
Injection Moulding Machine
Krauss Maffei 420/110/650/850
Germany
2016
used
on request
INNO27684
A total of 8 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible.
more
CNC-Welding-Machine-Kln-rudholzer-WNA-W-Warmnietanlage used
CNC Welding Machine
Kln/rudholzer WNA-W/Warmnietanlage
Germany
2013
used
on request
INNO27683
Five KLN and Rudholzer welding and hot riveting machines are available. 1/2) KLN WNA-W, year of construction: 2012/13, power: 11kW, frequency: 25kHz, machine dimensions X/Y/Z: approx. 2700mm/2000mm/2500mm, control: Siemens Simatic S7. 3/4/5) Rudholzer hot riveting machine, year of manufacture: 2016, control system: Siemens PLC. On-site inspection is possible.
more
Window-Manufacturing-Machine-Selecta-zierke-mla-urban-hoffmann-BSS-MLA-PU2-VH-M7 used
Window Manufacturing Machine
Selecta/zierke/mla/urban/hoffmann BSS/MLA/PU2-VH/M7
Germany
2015
used
on request
INNO27592
Individual sale possible. A variety of semi-automatic and automatic window construction machines are available. 1) Selecta BSS, year of manufacture: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of manufacture: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic grooving machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 4) Hoffmann PP2-FR chain milling machine for mullions and transoms, year of manufacture: 2004, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of manufacture: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Batimet FOM wood and aluminum punching machine, year of manufacture: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of manufacture: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Wood and aluminum mitre saw Hoffmann MS-35, year of construction: 2003, power: 2 x 18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. 10/11) Combination angle processing machines SCM Method K, year of construction: 1994, first machine dimensions X/Y/Z: approx. 1700mm/2700mm/1500mm, weight: approx. 1000kg, second machine dimensions X/Y/Z: approx. 1700mm/3000mm/1900mm, weight: approx. 1200kg. 12) Anno, year of construction: 1993, machine dimensions X/Y/Z: approx. 800mm/1400mm/2200mm, weight: approx. 120kg. On-site inspection is possible.
more
Granulation-Mill-Getecha-RS-2404 used
Granulation Mill
Getecha RS 2404
Germany
2018
used
on request
INNO27591
Cutting circle diameter: 240mm, cutting chamber opening X/Y: 465mm/330mm, rotor knives: 3 x 2, stator knives: 2, motor power: 5.5kW, throughput: approx. 100kg-160kg/h, machine dimensions X/Y/Z: approx. 1400mm/900mm/800mm. Including feed device (diameter: 96mm, width: 150mm), dancer arm extrusion, angle sensor and vector FU. Documentation available.
more
Granulation-Mill-Getecha-RS-45090 used
Granulation Mill
Getecha RS 45090
Germany
2012
used
on request
INNO27590
Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available.
more
Cutting-Mill-Getecha-GRS-300 used
Cutting Mill
Getecha GRS 300
Germany
2022
used
on request
INNO27589
A Getecha plastic granulator is available. Rotor diameter: 300mm, cutting width min./max.: 400mm/1260mm, number of rotor knives: 5, power: 5.5kW. Including an enlarged control cabinet. Overhauled with less than 100 operating hours. Documentation available.
more
Injection-Moulding-Machine-Krauss-Maffei-160-750-CX used
Injection Moulding Machine
Krauss Maffei 160-750 CX
Germany
2005
used
on request
INNO27501
Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible.
more
Winding-System-Wdb-WEx-400 used
Winding System
Wdb WEx-400
Germany
2011
used
on request
INNO27465
A winding machine WBD Systemtechnik with integrated cross cutter and cooling roller is available. Core diameter min./max. 25mm/152mm, core wall thickness: 16mm, machine length: approx. 5000mm, weight: approx. 5000kg, control: Siemens. Conveyor belt new and movable on rails. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Battenfeld-BA-1000-CDC used
Injection Moulding Machine
Battenfeld BA 1000 CDC
Germany
1998
used
on request
INNO27431
Clamping force: 1000kN, tie bar distance: 420mm/420mm, min. installation height: 250mm, max. opening stroke: 750mm, screw diameter: 40mm, injection volume: 226.5cm³, injection weight PE/PS: 206g/161g, injection pressure: 2164bar. Dimensions X/Y/Z: approx. 4500mm/1500mm/2000mm, weight: approx. 4700kg, control: Unilog 4000B, operating hours: 99295h. Including Euro package, ejector plate safety device, AK+ screw cylinder and storage cassette with 21 slots. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Battenfeld-BA-500-CD used
Injection Moulding Machine
Battenfeld BA 500 CD
Germany
1987
used
on request
INNO27430
Clamping force: 500kN, tie-bar spacing: 304mm/304mm, platen size X/Y/: 480mm/480mm, min. mold height: 150mm, max. opening stroke: 525mm, opening stroke: 375mm. Screw diameter: 35mm, injection volume: 134 cm³, injection pressure: 1485bar. Dimensions X/Y/Z: approx. 3300mm/1300mm/1900mm, weight: approx. 2500kg. On-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-420C-1500 used
Injection Moulding Machine
Arburg 420C 1500
Germany
1999
used
on request
INNO27341
Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-420C-1000 used
Injection Moulding Machine
Arburg 420C 1000
Germany
2013
used
on request
INNO27340
Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-370S-600-100 used
Injection Moulding Machine
Arburg 370S 600-100
Germany
2012
used
on request
INNO27339
Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-270S-350-100 used
Injection Moulding Machine
Arburg 270S 350-100
Germany
2012
used
on request
INNO27338
Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Bettenfeld-HM13000-2P used
Injection Moulding Machine
Bettenfeld HM13000 2P
Germany
2003
used
on request
INNO27325
Clamping force: 13000kN, tie bar distance X/Y: 1600mm/1250mm, installation height min./max.: 650mm/1400mm, opening stroke: 1680mm, screw diameter: 100mm, stroke volume: 3900cm³, control: Unilog B4, operating hours: 44450h. Including linear robot Bettenfeld R15, Euromap, Europaket, various interfaces, various Mouldmaster and core pulls. 1x core pull valve and flat surface nozzle defective. Documentation available.
more
Blow-Moulding-Machine-Sig-Corpoplast-Blomax-12 used
Blow Moulding Machine
Sig Corpoplast Blomax 12
Germany
2008
used
on request
INNO27319
A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 1
Automation-technology 59
Beverage-filling-technology 30
Complete-production-lines 3
Construction-machinery 24
Energy-management 129
Food-processing-and-beverage 129
Material-storage 66
Materials-handling-technology 55
Measurement-and-testing 53
Medical-equipment 5
Metal-processing-machines 927
Mining 2
Office-equipment 1
Other-machines 72
Packaging-machines 202
Pharmaceutical-and-cosmetics 19
Plastics-processing-machines 181
Printing-machines 74
Process-equipment-and-chemistry 137
Packaging-material-machinery 74
Robotics 37
Surplus-goods 4
Textile-machinery 72
Utility-vehicles 14
Woodworking-machines 70