Bale Press

Veb KME

Germany

1985

used

on request

INNO28351

A vertical baler for paper and cardboard is available. Motor power: 0.75kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/2000mm, weight: approx. 1200kg. On-site inspection is possible.

more

Single-Shaft Shredder

Gross GAZ 62

Germany

2011

used

on request

INNO28119

A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.

more

Bale Press

Dixi 18 S

Germany

2011

used

on request

INNO28094

A hydraulic, vertical Dixi baler is available. Motor power: 4kW, pressing force: 180kN, pressing time: 12s, cycle time: 22s, filling opening X/Y: 1070mm/620mm, working height: 98mm, bale dimensions X/Y/Z: approx. 1100mm/700mm/800mm, bale weight: approx. 120kg-180kg. Machine dimensions X/Y/Z: approx. 1550mm/950mm/2000mm, weight: approx. 850kg. Documentation available. On-site inspection is possible.

more

Shredder

Rapid 8045-KU

Germany

1994

used

on request

INNO27751

Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible.

more

Knife-Gate Valve

Watergates DN500

Germany

2020

used

on request

INNO27675

Six (6) identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible.

more

Shredder

Herbold SMS45/60

Germany

2003

used

on request

INNO27651

Inlet dimensions X/Y: 600mm/580mm, rotor width: 850mm, rotor diameter: 450mm, rotor blades: 3, power: 75kW, weight: approx. 3000kg. Available from middle of November 2024.

more

Shredder

Neue Herbold BM 170/260

Germany

2016

used

on request

INNO27548

Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

more

Shredder

Mecatex MR1000

Germany

2012

used

on request

INNO27268

A Mecatex shredder for wool is available. Number of rotor knives: 45, number of fixed knives: 6, number of knife holders: 2, working length: 1000mm, motor power: 37kW, max. production capacity: 1000m²/h. Control cabinet dimensions X/Y/Z: approx. 600mm/420mm/2000mm, control cabinet weight: approx. 80kg. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/2600mm, machine weight: approx. 2500kg, operating hours: approx. 900h. The hydraulics for tilting the hopper are defective. Documentation available. On-site inspection is possible.

more

Bale Press

Big Komet 12

Germany

1995

used

on request

INNO27105

A Big Komet 12 press is available. Pressing force: 120kN, dimensions X/Y/Z: approx. 4000mm/1100mm/1100mm, weight: approx. 5000kg.

more

Bale Press

Big HK 25

Germany

1998

used

on request

INNO27104

A Big HK 25 press is available. Pressing force: 250kN, dimensions X/Y/Z: approx. 5600mm/1100mm/3900mm, weight: approx. 5000kg.

more

Cutting Mill

Exact Cyclop 20

Germany

2015

used

on request

INNO27037

Working speed: 200-250m/min, max. working capacity: 300kg/h, cutting wheel diameter: 200mm, pressure cylinder diameter: 102mm, control: Omtron.

more

Waste Water Treatment Plant

Agw Chargenbehandlung

Germany

2004

used

on request

INNO26974

A wastewater treatment plant based on batch treatment from Antech Gütling (AGW), which was used in the printed circuit board industry (electronics), is available. It consists of a waste water collection station, a batch treatment, a chemical dosing station, a sludge treatment, a post-filtration/pH final control and an exhaust air scrubber. The system treats rinsing water, acidic and alkaline concentrates as well as waste water from the resist developer, resist stripper and solder resist developer areas. The system does not treat solvents, paints, hydraulic oils, used etchings (ammoniacal/acidic), waste water containing chlorite or EDTA-based chemical copper. Capacity: approx. 3m³/h. Documentation is available.

more

Shredder

Zeno ZTLL 1600x2300

Germany

2010

used

on request

INNO26874

Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available.

more

Shredder

Zeno ZTLL 1400x1600

Germany

2010

used

on request

INNO26873

Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available.

more

Paper Press

Allweiler SFDR10

Germany

1978

used

on request

INNO26786

Qn: 47l/min, Qv: 2750l/min, Hn: 75mm²/s, Δp: 5bar, P: 1.5kW.

more

Vertical Crusher

Krupp

Germany

unknown

used

on request

INNO25670

Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.

more

Impact Crusher

Pozatto FL 35

Germany

unknown

used

on request

INNO25668

Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar.

more

Bale Press

Bema BMF 650

Germany

2016

used

on request

INNO24368

Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h.

more