▷ Used energy management from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Energy management

Air conditioning 2 Block heats 5 Components and accessories 2 Compressed-air 42 Emergency power generators 4 Gas technology 4 Generators 4 Heat exchanger 3 Heating and blowers 5 Motors and turbins 10 Other machinery 1 Refrigerator cooling 39 Steam boilers 12 Switchgears and controlgears 2 Transformer 12

Innovac used-machines

Energy management [41 - 60 of 147]

Cooling Towers

Kühlturm Karlruhe K 18

Germany

2004

used

on request

INNO27076

Two identical Karlsruhe cooling towers are available. Cooling capacity: 990kW, water volume flow: 85m³/h, water inlet temperature/water outlet temperature: 35°C/25°C, dimensions X/Y/Z: approx. 5500mm/2500mm/1900mm, empty weight: approx. 1600kg. Documentation available.

Compressor and Refrigerant Dryer

Gea Grasso OS3

Germany

2007

used

on request

INNO26863

Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg.

Cold Water System

Riedel 2KTE080G

Germany

2017

used

on request

INNO26834

A Riedel/Glen Dimplex cold water system is available. Documentation available. On-site inspection is possible.

Screw Compressor

Kaeser SK19

Germany

1997

used

on request

INNO26819

Power: 11kW, Voltage: 230/460Volt, 3-Phase, max. Operating Pressure: 10bar, Flow Rate: 1.5m³/min, max. Flow Rate: 1.92m³/min (68 CFM), Flow Rate at Max. Pressure: 1.27 m³/min (45CFM). Dimensions (Length/Width/Height): 812,8mm/762mm/1041,4mm

Wind Turbine

Enercon E58

Germany

2003

used

on request

INNO26785

There are 8 identical Enercon E58 wind turbines available, year of construction: 2003, operational since: 2005, control system: CS58b, rated power: 1000kW, hub height: 70.5m, rotor diameter: 58m, operating hours: 132,303h, yield since start of operation: approx. 30 million kWh. Documentation available. On-site inspection is possible.

Compressor

Compair/hydrovane/beko CompAir F36M

Germany

unknown

used

on request

INNO26741

Several compressors from the manufacturers Hydrovane and Beko are available. The compressors are only sold as a package deal. Individual machines cannot be sold separately.

Transformer

Sgb DTTHL 630/20

Germany

2004

used

on request

INNO26734

There are 2 identical SGB transformers available. Theoretical power: 630kVA, peak power: 340kVA, average power: 300kVA. The transformers are only sold as a package deal. Individual machines cannot be sold separately.

Combined Heat and Power Plant

Aggretech S250P

Germany

2006

used

on request

INNO26722

Combined heat and power unit has been converted for continuous operation. Output: 225kW at 1500 rpm. Fuels: diesel/fuel oil.

Combined Heat and Power Plant

Senertec Dachs G 5.5

Germany

2011

used

on request

INNO26721

Electrical output: 5.5kW, thermal output: 14.8kW, power consumption: 20.5kW. Max. Flow temperature: 95°C, max. return temperature: 70°C, operating pressure: 5bar. Dimensions X/Y/Z without controller: approx. 1000mm/720mm/1070mm, weight: 530kg, operating hours: 66773, fuel: natural gas. Including condenser and MSR 2 control. Documentation available.

Screw Compressor

Kaeser CSD102

Germany

unknown

used

on request

INNO26670

Compressor is fully functional with run: 44621h and load: 22249h. Approximately 20 years old, but always serviced by a Kaeser service center.

Three-Phase Cast Resin Transformer

Ritz DTR105000

Germany

2019

used

on request

INNO26639

Two identical three-phase cast resin transformers are available. Frequency: 50 Hz, insulation class: F / F. Rated power/voltage/current: 4509kVA/10000V/260.3A. Dimensions X/Y/Z: 2385mm/1850mm/2682mm, weight: 11200kg. On-site inspection is possible.

Generator

Eisemann BSKA 9E

Germany

2016

used

on request

INNO26539

Two identical machines are available, power 1/2: 5000/9000VA, speed: 1800/3150/min, length: 700mm, width: 440mm, height: 580mm, weight: 126kg, with documentation, the generators are unused.

Screw Compressor

Mark MSA 11 IVR G2

Germany

2013

used

on request

INNO26499

Max. operational pressure: 10bar, connected load: 11kW, weight: 235kg, an inspection is possible.

Chiller

Ciat LDHM 400V R410A

Germany

2011

used

on request

INNO26445

Cooling output: 36.2kW, operating temperature: 50°C, weight: 1.57t, an inspection is possible.

Screw Compressor

Josef Mehrer BS 37-8

Germany

1994

used

on request

INNO26409

Volume flow: 5850l/min, rotational speed: 5750/min, motor power: 37kW, length: 2000mm, width: 900mm, height: 1250mm, weight: 830kg, with documentation, an inspection is possible, has been out of service since 2011, until this date it ran without any problems.

Three-Phase Transformer

Gbe TO3A12

Germany

2010

used

on request

INNO24201

Nominal power: 160kVA, including NH isolator with capacitors, GBE T119 DIN monitoring, 5 medium-voltage switches and 1 measuring transformer cabinet with instrument transformer. weight: 1.06t. On-site inspection is possible.

Air Conditioning System

Nova WK5/7-3/K3/S

Germany

2009

used

on request

INNO26282

Volume flow: 300m³/h, max. rotational speed: 2920/min, motor power: 0.42kW, length: 2850mm, width: 880mm, height: 1100mm, an inspection is possible.

Air Conditioning System

Nova WK7-10/K6/PT

Germany

2012

used

on request

INNO26281

Volume flow: 1000m³/h, max. rotational speed: 3000/min, motor power: 0.45kW, length: 6050mm, width: 920mm, height: 1370mm, an inspection is possible.

Axial Condenser

Güntner Ag GVH 100.2A/2x3-J(D)

Germany

2009

used

on request

INNO26270

Operating pressure: -1 to 32bar, operating temperature: -50 to 100°C, test pressure: 35.2bar.

Screw Compressor

Boge 65D-14

Germany

unknown

used

on request

INNO26240

Volume flow: 7.8m³/h, rotational speed: 2935/min, power: 55.3kW, length: 2350mm, width: 970mm, height: 1950mm, weight: 1,275t, operational hours counter: 37,429h, an inspection is possible.