Innovac GmbH Used machines from Germany
Innovac used-machines Energy management [1 - 20 of 147]
DC-Rack-Phoenix-Contact-Charx-Power-30kW used
DC-Rack
Phoenix Contact Charx Power 30kW
Germany
unknown
used
on request
INNO28113
A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible.
Steam-Boiler-Bosch-U-ND-2000 used
Steam Boiler
Bosch U-ND 2000
Germany
2015
used
on request
INNO28101
A Bosch low-pressure steam boiler is available. Total volume: 2480l, max. permissible pressure: 0.5bar, test pressure: 2bar, max. permissible temperature: 110°C, steam output: 1400kg/h, insulation thickness: 100mm. Machine dimensions X/Y/Z: approx. 2850mm/3800mm/3350mm, weight: approx. 3350kg. Documentation available. On-site inspection is possible.
Transformer-Abb-TNOSCTN-400-21PNSm used
Transformer
Abb TNOSCTN-400/21PNSm
Germany
2015
used
on request
INNO28079
Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible.
Power-Transfer-Station-Gräper-GA-3,10-x-2,70 used
Power Transfer Station
Gräper GA 3,10 x 2,70
Germany
2003
used
on request
INNO28054
Two transfer stations used in the wind turbine industry are available. 1) Gräper GA 3.10 x 2.70, year of construction: 2003, weight: approx. 18 tons. 2) Transfer station. The stations are located at different sites. On-site inspection is possible.
Water-Cooled-Liquid-Chiller-Carrier-30RW-30RWA-210 used
Water-Cooled Liquid Chiller
Carrier 30RW/30RWA-210
Germany
2004
used
on request
INNO28028
Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects.
Gas-Turbine-Opra-OP16-3B used
Gas Turbine
Opra OP16-3B
Germany
2012
used
on request
INNO28001
A complete system consisting of generator, turbine, gearbox, housing, exhaust gas duct and stack is available. 1) Gas turbine: Nominal output at ISO conditions: 1850kWe, fuel: natural gas, calorific value (LHV): 38.8MJ/kg, mass flow rate: 8.7kg/s, max. exhaust gas temperature: 571°C, max. exhaust gas flow: 221kg/s, turbine speed: 26000rpm, operating hours: approx. 20000h. 2) Generator: Type: Synchronous generator LSA 53 VL80/4p, rated power: 2316kVA/10.5kV, 127A, speed: 1500rpm. 3) Gearbox: Type: 2-stage planetary system GB24-1500, transmission ratio: 6.7:1, weight: approx. 350kg. Total system operating hours: 81269h. Documentation available. On-site inspection is possible.
Chiller-Klimat-hiref-RFS-18-LCE124FL used
Chiller
Klimat/hiref RFS 18/LCE124FL
Germany
2010
used
on request
INNO27991
Two chillers are available. 1) Klimat S.p.A. RF/S 18, year of manufacture: 1997, compressor: H2NG094, coolant: R22, coolant quantity: 6.5kg, oil: Zerol 150T, oil quantity: 2.55kg, max. water pressure: 3bar, cooling capacity: 20kW, machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 400kg. 2) HiRef LCE124FL, year of manufacture: 2010, max. operating pressure: 40.5bar, ambient temperature min./max.: -10°C/45°C, coolant: R410A, cooling capacity: 45kW, machine weight: approx. 2000kg. Documentation available. On-site inspection is possible.
Screw-Compressor-Atlas-Copco-ZR-200 used
Screw Compressor
Atlas Copco ZR 200
Germany
2000
used
on request
INNO27950
Max. Working pressure: 13bar, volume flow (FAD): 30m³/min, motor power: 200kW, length: 3200mm, width: 2000mm, height: 1650mm, weight: 4t, operating hours: approx. 45,000h. The machine is not functional and needs to be overhauled, the cooling circuit between the compressor stages is leaking in several places. With documentation, an on-site inspection is possible.
Screw-Compressor-Atlas-Copco-GA-90-VSD used
Screw Compressor
Atlas Copco GA 90 VSD
Germany
2008
used
on request
INNO27949
There are two identical compressors available, max. working pressure: 13bar, max. rotor speed: 4820/min, engine power: 90kW, weight: 1.534t, year of construction machine 1/ 2: 2000/ 2008. The machines are not in working order and need to be overhauled. On-site inspection is possible.
Direct-Current-Motor-Muraro-Stipaf-L3B-280-L used
Direct Current Motor
Muraro Stipaf L3B 280 L
Germany
2007
used
on request
INNO27848
Voltage: 460V, Torque: 1161Nm, Power: 500kW, Speed: 2300rpm, Insulation class: H, Operating mode: Continuous operation (S1), Protection class: IP 23 S, Ventilation: IC 06, Shaft diameter: 95mm, Machine dimensions X/Y/Z: approx. 1350mm/550mm/550mm. On-site inspection is possible.
Refrigerant-Dryer-Kaeser-TD-76 used
Refrigerant Dryer
Kaeser TD 76
Germany
2019
used
on request
INNO27768
Three identical Kaeser refrigeration dryers are available. Volume flow: 8.25m³/min, operating pressure: 16bar, air inlet: 3°C-55°C, ambient temperature: 3°C-45°C, coolant: R-513A, coolant volume: 1.5kg, machine dimensions X/Y/Z: approx. 800mm/1200mm/1200mm, weight: approx. 250kg. The copper parts of the machines have been attacked (spare parts carrier or in need of repair). Documentation available.
Recirculating-Cooling-Tower-Karlsruhe-gohl-ktk-K-18-28-3 used
Recirculating Cooling Tower
Karlsruhe (gohl-ktk) K 18-28-3
Germany
2002
used
on request
INNO27759
Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.
Transformer-Double-Substation-Scheidt-abb-areva-BEK250-420 used
Transformer Double Substation
Scheidt/abb/areva BEK250/420
Germany
2007
used
on request
INNO27753
A two-part Sheidt transformer station with two transformers is available. Rated power per transformer: 630kVA. Documentation available. On-site inspection is possible.
Transformer-Substation-Gräper-GA-450-330 used
Transformer Substation
Gräper GA 450/330
Germany
1994
used
on request
INNO27752
Transformer Heim, rated power: 400kVA, primary voltage: 10kV, insulation medium: oil-cooled, switchgear: medium voltage, cooling type: ONAN, cable connections: Medium voltage/low voltage, Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3500mm, Weight: approx. 15000kg-20000kg. Documentation available. On-site inspection is possible.
Pure-Steam-Generator-Stilmas-PSG-1500-DTS used
Pure Steam Generator
Stilmas PSG 1500 DTS
Germany
2002
used
on request
INNO27721
Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible.
Diesel-Three-Phase-Current-Aggregate-Volvo-stamford-steyr-TAD1631GE-HCI544F1-17S230 used
Diesel Three-Phase-Current Aggregate
Volvo/stamford/steyr TAD1631GE/HCI544F1/17S230
Germany
2024
used
on request
INNO27715
A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible.
Steam-Plant-Reining used
Steam Plant
Reining
Germany
2000
used
on request
INNO27710
A Reining waste gas heat recovery system is available. It receives the exhaust gases from the plant and currently generates approx. 25 t/h of steam from the heat of a hot rolling mill. The chimney and the heat exchangers were manufactured by Babcock-BSH around 1983. An on-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026.
Transformer-Leppert-dominit-SDO-800-20 used
Transformer
Leppert-dominit SDO 800/20
Germany
1975
used
on request
INNO27701
Rated power: 800kVA, operating mode: continuous operation, primary voltage: 20800V, secondary voltage: 20000V/480V, switching group: Dyn5, short-circuit voltage: 3.9%, short-circuit current: 2kA, cooling: ONAN, insulating weight (oil): approx. 490kg, primary current: 23.1A, secondary current: 1155A, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2150mm, weight: approx. 2250kg. Documentation available.
Pure-Steam-Generator-Finn-Aqua-500-H1 used
Pure Steam Generator
Finn Aqua 500 H1
Germany
1986
used
on request
INNO27674
Output at 45 PSIG: 440kg/h, max. pressure: 8bar, max. temperature: 121°C, material: stainless steel, steam: sterile, machine dimensions X/Y/Z: approx. 1200mm/800mm/2850mm. On-site inspection is possible.
Asynchronous-Three-Phase-Induction-Motor-Vem-DTSYX used
Asynchronous Three-Phase Induction Motor
Vem DTSYX
Germany
2005
used
on request
INNO27612
Three identical VEM three-phase high-voltage asynchronous motors are available. Rated power: 8.5MW (8500kW), voltage: 6000V, frequency: 50Hz, speed: 1500rpm, protection class: IP55, cooling: water, insulation class: F, bearings: roller bearings, vibration class: A, weight: approx. 30000kg. Including an oil lubrication unit overhauled in 2019 and 2x exciter cabinets. Documentation available. On-site inspection is possible.