Innovac GmbH Used machines from Germany
Innovac used-machines Energy management [21 - 40 of 134]
Gas-Turbine-Opra-OP16-3B used
Gas Turbine
Opra OP16-3B
Germany
2012
used
on request
INNO28001
A complete system consisting of generator, turbine, gearbox, housing, exhaust gas duct and stack is available. 1) Gas turbine: Nominal output at ISO conditions: 1850kWe, fuel: natural gas, calorific value (LHV): 38.8MJ/kg, mass flow rate: 8.7kg/s, max. exhaust gas temperature: 571°C, max. exhaust gas flow: 221kg/s, turbine speed: 26000rpm, operating hours: approx. 20000h. 2) Generator: Type: Synchronous generator LSA 53 VL80/4p, rated power: 2316kVA/10.5kV, 127A, speed: 1500rpm. 3) Gearbox: Type: 2-stage planetary system GB24-1500, transmission ratio: 6.7:1, weight: approx. 350kg. Total system operating hours: 81269h. Documentation available. On-site inspection is possible.
Chiller-Klimat-hiref-RFS-18-LCE124FL used
Chiller
Klimat/hiref RFS 18/LCE124FL
Germany
2010
used
on request
INNO27991
Two chillers are available. 1) Klimat S.p.A. RF/S 18, year of manufacture: 1997, compressor: H2NG094, coolant: R22, coolant quantity: 6.5kg, oil: Zerol 150T, oil quantity: 2.55kg, max. water pressure: 3bar, cooling capacity: 20kW, machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 400kg. 2) HiRef LCE124FL, year of manufacture: 2010, max. operating pressure: 40.5bar, ambient temperature min./max.: -10°C/45°C, coolant: R410A, cooling capacity: 45kW, machine weight: approx. 2000kg. Documentation available. On-site inspection is possible.
Screw-Compressor-Atlas-Copco-ZR-200 used
Screw Compressor
Atlas Copco ZR 200
Germany
2000
used
on request
INNO27950
Max. Working pressure: 13bar, volume flow (FAD): 30m³/min, motor power: 200kW, length: 3200mm, width: 2000mm, height: 1650mm, weight: 4t, operating hours: approx. 45,000h. The machine is not functional and needs to be overhauled, the cooling circuit between the compressor stages is leaking in several places. With documentation, an on-site inspection is possible.
Refrigerant-Dryer-Kaeser-TD-76 used
Refrigerant Dryer
Kaeser TD 76
Germany
2019
used
on request
INNO27768
Three identical Kaeser refrigeration dryers are available. Volume flow: 8.25m³/min, operating pressure: 16bar, air inlet: 3°C-55°C, ambient temperature: 3°C-45°C, coolant: R-513A, coolant volume: 1.5kg, machine dimensions X/Y/Z: approx. 800mm/1200mm/1200mm, weight: approx. 250kg. The copper parts of the machines have been attacked (spare parts carrier or in need of repair). Documentation available.
Recirculating-Cooling-Tower-Karlsruhe-gohl-ktk-K-18-28-3 used
Recirculating Cooling Tower
Karlsruhe (gohl-ktk) K 18-28-3
Germany
2002
used
on request
INNO27759
Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.
Transformer-Double-Substation-Scheidt-abb-areva-BEK250-420 used
Transformer Double Substation
Scheidt/abb/areva BEK250/420
Germany
2007
used
on request
INNO27753
A two-part Sheidt transformer station with two transformers is available. Rated power per transformer: 630kVA. Documentation available. On-site inspection is possible.
Transformer-Substation-Gräper-GA-450-330 used
Transformer Substation
Gräper GA 450/330
Germany
1994
used
on request
INNO27752
Transformer Heim, rated power: 400kVA, primary voltage: 10kV, insulation medium: oil-cooled, switchgear: medium voltage, cooling type: ONAN, cable connections: Medium voltage/low voltage, Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3500mm, Weight: approx. 15000kg-20000kg. Documentation available. On-site inspection is possible.
Pure-Steam-Generator-Stilmas-PSG-1500-DTS used
Pure Steam Generator
Stilmas PSG 1500 DTS
Germany
2002
used
on request
INNO27721
Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible.
Diesel-Three-Phase-Current-Aggregate-Volvo-stamford-steyr-TAD1631GE-HCI544F1-17S230 used
Diesel Three-Phase-Current Aggregate
Volvo/stamford/steyr TAD1631GE/HCI544F1/17S230
Germany
2024
used
on request
INNO27715
A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible.
Steam-Plant-Reining used
Steam Plant
Reining
Germany
2000
used
on request
INNO27710
A Reining waste gas heat recovery system is available. It receives the exhaust gases from the plant and currently generates approx. 25 t/h of steam from the heat of a hot rolling mill. The chimney and the heat exchangers were manufactured by Babcock-BSH around 1983. An on-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026.
Transformer-Leppert-dominit-SDO-800-20 used
Transformer
Leppert-dominit SDO 800/20
Germany
1975
used
on request
INNO27701
Rated power: 800kVA, operating mode: continuous operation, primary voltage: 20800V, secondary voltage: 20000V/480V, switching group: Dyn5, short-circuit voltage: 3.9%, short-circuit current: 2kA, cooling: ONAN, insulating weight (oil): approx. 490kg, primary current: 23.1A, secondary current: 1155A, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2150mm, weight: approx. 2250kg. Documentation available.
Pure-Steam-Generator-Finn-Aqua-500-H1 used
Pure Steam Generator
Finn Aqua 500 H1
Germany
1986
used
on request
INNO27674
Output at 45 PSIG: 440kg/h, max. pressure: 8bar, max. temperature: 121°C, material: stainless steel, steam: sterile, machine dimensions X/Y/Z: approx. 1200mm/800mm/2850mm. On-site inspection is possible.
Air-Conditioning-System-York-ARH-045-A used
Air Conditioning System
York ARH 045 A
Germany
unknown
used
on request
INNO27595
Air flow rate: 11500m³/h, cooling capacity: 45kW, heating capacity: 45kW, energy consumption cooling/heating: 16kW/16kW, EER: 3.19, temperature range: -10°C/46°C. Machine dimensions X/Y/Z: approx. 3200mm/2400mm/1200mm, weight: approx. 1200kg.
Surface-Cooler-Heatcraft-Europe-FC-PU06 used
Surface Cooler
Heatcraft Europe FC PU06
Germany
unknown
used
on request
INNO27520
A surface cooler with various small appliances is available. 1) Surface cooler Heatcraft Europe FC PU06DL02D3 1C4 33 B, volume flow: 62dm³. 2) KSB pump, year of manufacture: 2020, output: 4kW. 3) Lifting machine for coil holder Oerlikon HM-2529. 4) Blower Ferrari FR 1001 N04S/3RD 90, year of manufacture: 2019, speed: 1500 rpm, max. temperature: 100°C, power: 75kW. Documentation available. On-site inspection is possible.
Low-Voltage-System-Feag-Energoline used
Low Voltage System
Feag Energoline
Germany
2015
used
on request
INNO27517
Rated current: 2250A, rated impulse current: 75kA/125kA, degree of protection cabinet/floor: IP20/IP00, protection class: SK1, cable entry: bottom, main lines: 400V/230C AC, control lines: 110V DC, signal lines: 110V DC, number of panels: 7, panel equipment: panel 1: 4x NH00, panel 2: 2x NH1, panel 3: 2x NH2, panel 4: 2x NH3, panel 5-6: Siemens WLII 2000S+ETU25B, panel 7: Siemens BR6000 compensation. Documentation available. On-site inspection is possible.
Refrigerant-Dryer-Spx-hankison-kaeser-HHD470-AS-35 used
Refrigerant Dryer
Spx/hankison/kaeser HHD470/AS 35
Germany
2009
used
on request
INNO27488
A Kaeser screw compressor and a Hankison compressed air refrigeration dryer (SPX) are available. 1) Hankison HHD470 compressed air refrigeration dryer, year of manufacture: 2009, refrigerant: R407C, refrigerant quantity: 1.1kg, volume flow: 470m³/h, machine dimensions X/Y/Z: approx. 1000mm/450mm/800mm. 2) Kaeser AS 35 screw compressor, year of manufacture: 1985, output: 22kW, volume flow: 3.06m³/min, operating overpressure: 10bar, operating hours: 54577h, machine dimensions X/Y/Z: approx. 800mm/1500mm/110mm. On-site inspection is possible.
Emergency-Power-System-Mwm-piller-TBD232-V12-NKTB used
Emergency Power System
Mwm/piller TBD232 V12/NKTB
Germany
unknown
used
on request
INNO27472
A complete emergency power system is available in the sea container. Engine: Manufacturer: MWM, type: TBD 232 V12, power: 321 hp, coolant: water, speed: 1500 rpm. Generator: Manufacturer: Piller, type: NKTB, power range: 250kVA-275kVA, speed: 1500mm, operating hours: 3420h.
Plate-Heat-Exchanger-Alfa-Laval-thermofin-M10-TBN used
Plate Heat Exchanger
Alfa Laval/thermofin M10/TBN
Germany
2019
used
on request
INNO27451
There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available.
Refrigerating-Plant-Gohl-DT-27-Z-FM12 used
Refrigerating Plant
Gohl DT 27 Z-FM12
Germany
1999
used
on request
INNO27450
Motor power: 0.48 kW/1.9 kW, motor speed: 750 rpm/1500 rpm.
Steam-Boiler-System-Bosch-weishaupt-ECO-1-UL-S-2000-WM-L20 used
Steam Boiler System
Bosch/weishaupt ECO 1/UL-S 2000/WM-L20
Germany
2021
used
on request
INNO27425
A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available.