▷ Used automation technology from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Automation technology

Assembly systems 1 Manipulators 1 Other machinery 6 Placement technology 41 Positioning systems 1 Steerings 5

Innovac used-machines

Automation technology [1 - 20 of 55]

Press-in Machine

Tyco P300

Germany

2001

used

on request

INNO28060

A Tyco (TE Connectivity) press-fit machine (insertion machine) is available. Insertion dimensions X/Y: 300mm/310mm, max. speed: 150mm/s, max. number of insertions: 15 million/year, insertion capacity: 4000-5000 pins/h. Machine dimensions X/Y/Z: approx. 2400mm/1600mm/1450mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.

Pick-And-Place Machine

Mechatronika M10V

Germany

2013

used

on request

INNO28008

A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible.

Coating System

Dage Prima V7

Germany

2013

used

on request

INNO27750

Basket dimensions X/Y/Z: 300mm/250mm/200mm, bath capacity: 52l/80kg, European card throughput: approx. 280/h, machine dimensions X/Y/Z: approx. 1000mm/750mm/1050mm. Including automatic drain, fill level monitoring, cooling zone, collection container for water/solvent: 0.5l/5l. Inspection of the cooling system is necessary. Documentation available. On-site inspection is possible. Expected to be available from mid-October 2024.

Placement System

Neoden S1

Germany

2019

used

on request

INNO27708

Heads: 4, Feeder slots: 58, Positioning accuracy: +/-0.01mm, Production output: 6000CPH, Camera field of view X/Y at 20µm resolution: 48mm/40mm, Machine dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection is possible.

Wave Soldering System

Seho System 8040 PCS

Germany

unknown

used

on request

INNO27642

Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available.

Reflow Oven

Smt 1.7 TC N2

Germany

2005

used

on request

INNO27641

Text: Heating zones: 7, transport width: 400mm, transport speed: 1500mm/min, nitrogen consumption at 250°C: approx. 15m³/h, nitrogen purity: 99.999%, cooling zones: 2, machine dimensions X/Y/Z: approx. 3300mm/1400mm/1500mm, weight: approx. 2000kg.

Screen and Stencil Printer

Ekra X3

Germany

2010

used

on request

INNO27636

Print format X/Y min./max.: 80mm x 50mm/460mm x 460mm, print material thickness: 1mm-6mm, Lp under clearance: 23mm, screen/stencil dimensions X/Y min./max. : 300mm x 300mm/740mm x 740mm, table adjustment X/Y: +/-4mm, repeatability at 6 sigma: +/-15µm, squeegee speed: 10mm-200mm/s, squeegee pressure: 10N-250N, cycle time plus pressure: 12s, camera type: DC8/15µm per pixel, camera viewing window: 12mm/9mm, separation distance: 0mm-3mm, separation speed: 0.3mm-10mm/s, transport height: 830mm-950mm. Machine dimensions X/Y/Z: approx. 1100mm/1490mm/1400mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

Automatic Measuring System

Pcam/comau CMM 655 CNC

Germany

2013

used

on request

INNO27484

An automatic handling and measuring system for the milling and eroding process is available. Robot: Load capacity: 150kg (pallet + workpiece), number of axes: 6, intended use: Loading and unloading of workpieces and tools in the warehouse. Measuring machine: PCam CMM 655 CNC. The system is configurable. Documentation available.

Control System

Siemens/baumüller Sinumerik 840D/GHT S42

Germany

unknown

used

on request

INNO27429

Various machine parts are available. 1) Siemens Sinumerik 840D PCI/ISA-BOX, Siemens Sinumerik 840D, MMC103, Sinumerik 840D CNC full keyboard XT/AT. 2) 2x load contactor Siemens 3RT1054-6AP36. 3) Tachometer Baumüller GHT S42.

Frequency Converter

Vectron-elektronik VC 400-060

Germany

unknown

used

on request

INNO27407

Input voltage (+/-15%): 3 x 400V, output voltage (+/-15%): 3 x 0V-400V, input frequency: 50Hz-60Hz, power: 0kW-200kW, output frequency: 0Hz-200Hz, rated current: 72A. Overload capacity: 1.2: 60A, 42kVA, 30kW, 1.5: 45A, 31kVA, 22kW. Voltage: 265V, frequency: 195Hz, initial voltage: 13.6V, initial frequency: 0Hz. Dimensions X/Y/Z: approx. 2100mm/800mm/500mm. Documentation available. On-site inspection is possible.

Automated Optical Inspection Machine

Göpel Opticon BasicLine NP

Germany

2009

used

on request

INNO27266

Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available.

SMT Feeder

Feeder Rüttelfeeder/8mm-44mm

Germany

unknown

used

on request

INNO27262

Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages.

Placement System

Zevatech/juki/dek FS730/FM740/TR4NEZ/265

Germany

1995

used

on request

INNO27261

A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available.

Stencil Printer

Ekra E1

Germany

2000

used

on request

INNO27087

Print area X/Y: 430mm/570mm, frame thickness: 30mm, print speed: 110mm/s, separation rate: 0.4-1mm/s, alignment X/Y: +/-8mm, alignment theta: +/-2°. Dimensions X/Y/Z: approx. 1300mm/1100mm/1400mm, weight: approx. 350kg. Suitable for Alpha Tetra stenter frames.

Placement System

Panasonic RH 3

Germany

unknown

used

on request

INNO27012

Production speed: 25000/h, placement accuracy: 0.065mm, component dimensions: 2.5mm and 5mm. Loading and unloading of PCBs must be done manually due to a defect. 380V transformer included.

Magazine Loader And Unloader

Panasonic MBS M/MBSF M

Germany

2002

used

on request

INNO27011

A magazine loading unit and a magazine unloading unit for the Panasonic Panasert MB series are available. Including a 230V transformer.

Wave Soldering System

Seho 2340-LRT

Germany

2005

used

on request

INNO27015

The system has been switched off since 2014. Until then, all maintenance was carried out. Soldering width: 400mm, preheating zones: 6, convection heating length: 2000mm, soldering wave width: 450mm, max. soldering wave height with F-nozzle: 8mm. Total length: approx. 30m, infeed conveyor with stacker for return transport: approx. 14m, fluxer and soldering module: approx. 11m, outfeed conveyor with stacker for return transport: approx. 7m. Documentation available. Including 350kg solder, 3 loading tables, 40 outer frames and some spare parts. On-site inspection is possible.

Wave Soldering System

Vitronics Soltec Delta Wave 6622CC

Germany

2006

used

on request

INNO27013

Chip shaft and main shaft can be switched separately. Alloy: SN100C, heating zones: 3 (including 1 convection), primary shaft: lambda shaft, dimensions X/Y/Z: approx. 3810mm/1400mm/2000mm, weight: approx. 2500kg. Defects: automatic height adjustment of the crucible, traces of corrosion on the crucible, manual activation of convection. Available from October 2024.

Heavy Wire Bonder

Hesse Bondjet 939

Germany

2012

used

on request

INNO26845

There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg.

Servo Motor

Indramat/controltechniques MAX1012D/MDD0

Germany

unknown

used

on request

INNO26749

There are 6 baskets full of servomotors available. More detailed list available in the pictures. All servomotors work perfectly. Documentation available. On-site inspection is possible.