Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Process equipment and Chemical plants
Blowers 4 Centrifuges 5 Compressors 19 Decanter 1 Filter systems 24 Mills 5 Mixing machines 27 Other machinery and plants 8 Paper production 1 Pumps 4 Storage containers and tanks 17 Water treatment equipment 6
Innovac used-machines Process equipment and Chemical plants [1 - 20 of 121]
Suction-Unit-Spänex-Additor-K-II-II-VU-15-SBU-165-S2-000 used
Suction Unit
Spänex Additor-K-II-II-VU-15-SBU-165-S2-000
Germany
1995
used
on request
INNO28522
Volume flow: 4080m³/h, filter area: 34m², BIA category: G, differential pressure: 1650Pa, filtration surface load: 120m³/h-m², air density: 1.2kg/m³, operating temperature: 20°C. Documentation available. On-site inspection is possible.
more
Filter-Press-Häcker-02.040 used
Filter Press
Häcker 02.040
Germany
unknown
used
on request
INNO28518
Two identical Häcker chamber filter presses are available. Plate dimensions X/Y: 400mm/400mm, max. filtration pressure: 10bar, max. closing pressure: 10bar, filter cloth type: push-through filter cloths, hydraulic oil: HLP-D ISO 22, oil filling quantity: approx. 2.1l, automatic control: 10.218. Documentation available. On-site inspection is possible.
more
Compressor-Becker-and-Söhne-SV-125-40 used
Compressor
Becker & Söhne SV 125/40
Germany
2023
used
on request
INNO28500
A Becker & Söhne compressor including tank is available. 1) Compressor: operating pressure: 40bar, speed: 940rpm, power: 2.2kW, air volume flow: 125l/min. 2) Pressure tank Mabe MB, year of manufacture: 2023, operating pressure: 41bar, test pressure: 58.63bar, volume: 250l, temperature min./max.: -10°C/50°C. Documentation available. On-site inspection is possible.
more
Compressor-Atlas-Copco-GA-15-VSDS-P used
Compressor
Atlas Copco GA 15 VSDS P
Germany
2023
used
on request
INNO28499
Two identical compressors including tank, piping and dryer are available. Power: 3kW, operating pressure: 10bar, max. pressure: 13.5bar, machine weight: approx. 236kg. Documentation available. On-site inspection is possible.
more
Thermal-Fume-Incineration-Plant-Koenig-and-Bauer-Metalprint used
Thermal Fume Incineration Plant
Koenig & Bauer Metalprint
Germany
1999
used
on request
INNO28484
A complete LTG Mailänder (now Koenig & Bauer) thermal exhaust air incineration plant is available. Exhaust air volume: 20000Nm³/h, max. solvent volume: 1.5g/m³, max. combustion chamber temperature: 850°C, fuel: natural gas, calorific value: 10kWh/m³, connected load: 45kW, solvent filter capacity: 30kg/h. Documentation available. On-site inspection is possible.
more
Dissolver-Vma-Getzmann-Torusmill-100-CH-EX used
Dissolver
Vma Getzmann Torusmill 100 CH EX
Germany
2007
used
on request
INNO28481
A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible.
more
Hydraulic-Aggregate-Hydropa-WE-10-HG-F4M-QX-10 used
Hydraulic Aggregate
Hydropa WE 10 HG-F4M/QX 10
Germany
2005
used
on request
INNO28467
Pump type: QX 31-020/21-016/21-012 R, power: 5.5kW, flow rate: 29l+23l+18l/min, max. pressure: 3x40bar, oil viscosity: 32-46cSt, usable volume: 300l. On-site inspection is possible.
more
Paper-Belt-Filter-Ame-PS-150 used
Paper Belt Filter
Ame PS 150
Germany
2024
used
on request
INNO28456
A brand new AME belt filter system for continuous cleaning of cooling lubricants (e.g. emulsions, oils) using the gravity principle is available. Emulsion capacity: 150l/min, oil capacity: 90l/min, tank volume: 800l, machine dimensions X/Y/Z: approx. 1900mm/1000mm/1300mm, weight: approx. 410kg. Documentation available. On-site inspection is possible.
more
Compressor-Ingersoll-Rand-UP5-5-8 used
Compressor
Ingersoll Rand UP5-5-8
Germany
2006
used
on request
INNO28430
An oil-lubricated Ingersoll Rand screw compressor is available. Air volume flow: 0.65m³/h, max. operating pressure: 8bar, connected load: 5.5kW, motor speed: 2900rpm, machine dimensions X/Y/Z: approx. 1000mm/700mm/1000mm, weight: approx. 300kg. On-site inspection is possible.
more
Planetary-Mixer-Herbst-HRV-S-60 used
Planetary Mixer
Herbst HRV-S 60
Germany
2010
used
on request
INNO28416
A planetary mixer Herbst including mixing vessel is available. Speed range: 15rpm-60rpm, machine dimensions X/Y/Z: approx. 950mm/1060mm/2080mm, weight: approx. 530kg. Including mixing vessel, volume: 60l, usable volume: 50l. Documentation available. On-site inspection is possible.
more
Planetary-Mixer-Herbst-HRV-S-30 used
Planetary Mixer
Herbst HRV-S 30
Germany
2008
used
on request
INNO28415
A planetary mixer Herbst without vessel is available. Speed range: 40rpm-150rpm, machine dimensions X/Y/Z: approx. 811mm/811mm/1732mm, weight: approx. 250kg. Without mixing vessel. Documentation available. On-site inspection is possible.
more
Piston-Compressor-Alup-CK used
Piston Compressor
Alup CK
Germany
unknown
used
on request
INNO28408
Volume flow: 650l/min, motor power: 5.5kW, tank volume: 350dm³, operating pressure: 10bar. On-site inspection is possible.
more
Drying-Turbine-Kroll-GP-45 used
Drying Turbine
Kroll GP 45
Germany
unknown
used
on request
INNO28407
Heating output: 42.8kW, tank capacity: 51l, fuel: heating oil, oil consumption: 3.63kg/h, blower output: 1600m³/h. An on-site inspection is possible.
more
Stainless-Steel-Tank-Thrun-5000 used
Stainless Steel Tank
Thrun 5000
Germany
2002
used
on request
INNO28404
Volume: 5000l, permissible operating temperature: 80°C. On-site inspection is possible.
more
Dissolver-Niemann-vollrath-pendraulik-NLD-I-VDSVY-15-VDSVY-40-WDV-10 used
Dissolver
Niemann/vollrath/pendraulik NLD I/VDSVY 15/VDSVY 40/WDV 10
Germany
1995
used
on request
INNO28399
Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700mm, disk diameter: 400mm, tank volume: 400l, tank diameter: 785mm, tank height: 990mm, outlet diameter: 45mm. 3) Vollrath VDSVY 40, year of construction: 1991, tank volume: 400l, speed: 1000rpm, shaft length: 700mm, disk diameter: 400mm, machine dimensions X/Y/Z: approx. 3200mm/800mm/1200mm. 4) Pendraulic WDV 10, speed: 1800rpm, shaft length: 985mm, disk diameter: 275mm, lifting height: 1250mm, machine dimensions X/Z: 560mm/3450mm, weight: approx. 850kg. On-site inspection is possible.
more
Bead-Mill-Drais-DCP-Superflow-170-C used
Bead Mill
Drais DCP-Superflow 170 C
Germany
1995
used
on request
INNO28398
A high-performance Drais bead mill for the chemical-cosmetic industry is available. Flour chamber volume: 15l, operating temperature: 98°C, speed: 1470rpm, flow rate: 2500l/h, power: 45kW. On-site inspection is possible.
more
Vacuum-Double-Planetary-Mixing-Unit-Herbst-HRV-S-120-DP used
Vacuum-Double-Planetary Mixing Unit
Herbst HRV-S 120 DP
Germany
2019
used
on request
INNO28370
Voltage: 400V, max. container capacity: 80kg, recommended container weight: 50kg-60kg, weight: approx. 400kg. Including vacuum pump and agitator. On-site inspection is possible.
more
Screw-Compressor-Kaeser-DS170-AS31 used
Screw Compressor
Kaeser DS170/AS31
Germany
1998
used
on request
INNO28298
Two Kaeser compressors are available. 1) Kaeser DS 170, year of manufacture: 1998, rated power: 90kW, air volume flow: 14m³/min, max. operating pressure: 7.5bar, machine dimensions X/Y/Z: approx. 3000mm/2000mm/2200mm, weight: approx. 2800kg, load hours: 74833h, operating hours: 98982h. 2) Kaeser AS31, year of manufacture: 1998, rated power: 18.5kW, max. operating pressure: 7.5bar, air volume flow: 3.1m³/min, machine dimensions X/Y/Z: approx. 1500mm/900mm/1300mm, weight: approx. 1000kg, operating hours: 18067h. Documentation available. On-site inspection is possible.
more
Piston-Compressor-Kaeser-EPC-840-250 used
Piston Compressor
Kaeser EPC 840-250
Germany
2014
used
on request
INNO28266
Operating pressure: 10bar, air volume flow: 590l/min, speed: 1500rpm, power: 4kW. Documentation available. On-site inspection is possible.
more
High-Pressure-Pump-Hammelmann-volvo-Penta-TR71A used
High Pressure Pump
Hammelmann/volvo Penta TR71A
Germany
1987
used
on request
INNO28197
A high-pressure cleaning system with Hammelmann high-pressure plunger pump and Volvo Penta engine is available. Operating power: 110kW, speed: 1800rpm, max. medium temperature: 50°C, piston diameter: 30mm, max. operating pressure: 790bar, flow rate: 64l/min, pressure control valve: 096, oil type: BM 5180, oil volume: 7l, oil pressure: 2bar. On-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 1
Automation-technology 53
Beverage-filling-technology 27
Complete-production-lines 3
Construction-machinery 25
Energy-management 147
Food-processing-and-beverage 128
Material-storage 65
Materials-handling-technology 58
Measurement-and-testing 57
Medical-equipment 7
Metal-processing-machines 909
Mining 1
Office-equipment 1
Other-machines 74
Packaging-machines 196
Pharmaceutical-and-cosmetics 17
Plastics-processing-machines 187
Printing-machines 74
Process-equipment-and-chemistry 121
Packaging-material-machinery 85
Robotics 39
Surplus-goods 4
Textile-machinery 96
Utility-vehicles 8
Woodworking-machines 92