▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Welding and cutting [1 - 20 of 83]

Welding Rotating Device

Reinartz Thieler 300 R

Germany

unknown

used

on request

INNO28126

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

Cutting Optic

Trumpf F240 D40 R265

Germany

unknown

used

on request

INNO28111

Still in the original packaging, has been little used. On-site inspection is possible.

Corner Seam Welding Machine

Fröhlich/migatronic SAX700/Automig 273i

Germany

2018

used

on request

INNO28104

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

CNC Waterjet Cutting Machine

Stako Trium WPC

Germany

2016

used

on request

INNO28087

Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible.

Mesh Welding System

Gad RE40/R33/R31

Germany

2009

used

on request

INNO28062

A complete GAD lattice girder welding system with Wafios wire straightening and cutting machines is available. 1) GAD mesh welding machine, year of manufacture: 2009, mesh width: 270mm-3000mm, mesh length: 600mm-3500mm, line wire diameter: 2.5mm-8mm, line wire pitch single rod/double rod: 25mm/50mm, cross wire diameter: 2.5mm-8mm, cross wire pitch: 15mm, transformers: 3x, machine dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. 2) Wire straightening and cutting machine Wafios RE 40, year of construction: 2021, wire diameter: 3mm-10mm, cutting capacity: 120 rods/min, cutting capacity with fixed stop and continuous cut: 220 rods/min. 3) Wafios R33 wire straightening and cutting machine, year of manufacture: 2011, wire diameter: 1.5mm-7mm, cutting capacity: 160-320 cuts/min. 4) Wafios R31, year of manufacture: 1997, wire diameter: 1.5mm-7mm, cutting capacity: 160-270 cuts/min. System production capacity: approx. 1250kg/h, total system dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. All wire straightening and cutting machines including reel. Documentation available. On-site inspection is possible.

Coping Robot

Kaltenbach KC 1200

Germany

2010

used

on request

INNO28050

With notching robot Kuka + transport system T13 / M150, equipped with oxy-fuel torch for steel profiles, sheets, rectangular tubes. Number of axes notching system: 8, transport system infeed length set up: approx. 13.5m (1 long version still available), transport system outfeed length set up: approx. 10.0m (4 standard trestles still available), electronics for cross conveyor infeed and outfeed: completely included in the control cabinet (without cross conveyor), safety fencing: only partially set up (complete fencing available), safety light barriers: not set up (completely available). With documentation, an on-site inspection is possible.

CNC Laser Cutting Machine

Trumpf TLC 1050

Germany

2000

used

on request

INNO28019

Laser power: 4kW (4000W), travel X/Y/Z: 4000mm/1500mm/500mm, C-axis: 360°, table dimensions X/Y: 3000mm/1500mm, connected load: 90kVA, machine dimensions X/Y/Z: approx. 9000mm/5000mm/3000mm, weight: approx. 10000kg, laser hours: 34879h. The resonator is defective. Documentation available. On-site inspection is possible.

CNC Laser Cutting Machine

Amada FLC-3015 AJ

Germany

2013

used

on request

INNO27976

X-axis: 3070mm, Y-axis: 1550mm, Z-axis: 100mm, max. workpiece weight: 920kg, cutting capacity VA: 0.5-4mm, steel: 0.5-4mm, aluminum: 0.5-5mm, control: AMNC/PC, connected load: 18.4kVA, length: 9300mm, width: 2900mm, height: 2000mm, weight: 12t. With laser source AJ2000 2kW, automatic material tower ASLUL300F1, LKI Wöldman, compact dust extractor and programming software. On-site inspection is possible. Available in February 2025.

Laser Welding Machine

Askea Phos-Syndeo-Multus

Germany

2004

used

on request

INNO27938

An Askea laser welding machine with Lasag SLS 200 C60 laser emitter is available. Laser power: 120J/400W, pulse duration: 0.142ms, wavelength: 1064nm, pilot laser: 630nm-640nm, max. power: 1mW. Documentation available. On-site inspection is possible.

Welding Machine

Fronius/soyer/aro Vario Synergetic 4000-2/BMK-10LC/AR.01

Germany

2007

used

on request

INNO27903

There are 3x welding machines available. 1) MIG/MAG welding machine Fronius Vario Synergic 4000-2 G/W, year of construction: 2007. Includes hose package, wire feeder VR 3300, and pressure regulator. Without gas cylinder. 2) Stud welding machine Soyer BMK-10LC, year of construction: 1998. 3) Spot welding machine Aro AR.01, year of construction: 2000. Includes jib crane with balancer and cooling. Documentation available. On-site inspection is possible.

Flame Cutting Machine

Esab SUPRAREX SXE-P (D)

Germany

1999

used

on request

INNO27891

Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible.

Welding Machine

Heberle/hbs/lorch/mig O Mat/castolin+eutectic cd System 2010/SEW 200N/MIG O MAT WIGSTAR 250i

Germany

unknown

used

on request

INNO27872

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

Welding Fume Extraction

Esta SRF P 10

Germany

1996

used

on request

INNO27784

An Esta mobile welding fume extraction unit is available. Power: 1.1kW, filter area: 10m², nominal volume flow: 890m³/h, minimum volume flow: 570m³/h, volume flow control: 24mbar, max. operating temperature: 60°C, cleaning: 5bar-8bar, machine dimensions X/Y/Z: approx. 1150mm/550mm/1200mm, weight: approx. 100kg. On-site inspection is possible.

CNC Laser Cutting Machine

Trumpf TruLaser 3030

Germany

2011

used

on request

INNO27762

Laser power: 5kW, travel X/Y/Z: 3000mm/1500mm/115mm, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, connected load: 108kVA, max. workpiece weight: 900kg. Machine dimensions X/Y/Z: approx. 10800mm/6400mm/3000mm, weight: approx. 12000kg, operating hours: 38992h, control: Siemens Sinumerik 840D SL. Including additional lens cutting head with 130mm to the thin sheet metal productive package and nozzle changer. Documentation available. On-site inspection is possible.

Mesh Welding System

Evg TSD 7-25

Germany

1992

used

on request

INNO27757

Carrier type: KT8, carrier height: 90mm-250mm, upper belt diameter: 5mm-12mm, upper belt surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower belt diameter: 4mm-10mm, lower belt surface: smooth/ribbed, max. carrier length: 14000mm, cutting grid: 100/200mm, run-off plate: 5. Stacker SVH included. Documentation available. On-site inspection is possible.

Mesh Welding System

Evg TSD 7-25

Germany

1993

used

on request

INNO27756

Carrier type: KT8, carrier height: 90mm-250mm, upper belt diameter: 5mm-12mm, upper belt surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower belt diameter: 4mm-10mm, lower belt surface: smooth/ribbed, max. carrier length: 14000mm, cutting grid: 100/200mm, run-off plate: 5. Stacker SVH included. Documentation available. On-site inspection is possible.

Mesh Welding System

Filzmoser GH300/70

Germany

1994

used

on request

INNO27755

Beam type: KT8, beam height: 60mm-300mm, upper beam diameter: 5mm-12mm, upper beam surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower beam diameter: 5mm-12mm, lower beam surface: smooth/ribbed, max. beam length: 14600mm, cutting grid: 100/200mm. Documentation available. On-site inspection is possible.

Mesh Welding System

Filzmoser GH73/ST

Germany

1994

used

on request

INNO27754

Beam type: KTS, beam height: 80mm-300mm, upper beam diameter: 5mm, upper beam surface: smooth/ribbed, diagonal diameter: 7mm, diagonal surface: smooth, lower beam diameter: 5mm, lower beam surface: smooth/ribbed, max. beam length: 14000mm, cutting grid: 200mm. Documentation available. On-site inspection is possible.

Welding Robot Cell

Reis TYPRV20-16-RSVI

Germany

2015

used

on request

INNO27746

Welding robot: RV20-16 with turntable, welding source: Merkle High Pulse 551 RS, positioner: integrated welding positioner, cabin equipment: double station with high-speed doors, welding type: MIG/MAG welding. Machine dimensions X/Y/Z: approx. 3800mm/2400mm/2200mm, weight: approx. 3750kg. Including all available tools, spare parts and accessories. Documentation available. On-site inspection is possible.

Slitting and Winding Machine

Euromac TB-3.06iS

Germany

2013

used

on request

INNO27712

Working width: 1200mm, max. nut roll diameter: 1000mm, max. end roll diameter: 600mm, max. roll weight: 1500kg, min. roll width: 300mm, web tension: 50N-400N/axis, core inner diameter unwind/rewind: 152mm/76mm, speed: 500m/min, max. cuts: 32, products: painted aluminum: 25µm-70µm, aluminum laminates: 40g-150g/m², embossed aluminum: 105µm-160µm, underbridge space: 2000mm. Machine dimensions X/Y/Z: approx. 5731mm/5710mm/2652mm, control: Siemens PLC 7, operating hours: 5736h. Including spare lower knife shaft, sets of spacer rings, circular knives on sleeves including spare circular knives, hard-coated aluminum deflection rollers, rubberized smooth contact rollers, an optical positioning aid with spotlights, a handling trolley, a manually movable unloading frame, a mending table on the unwinder as well as area protection by floor scanner and a hood. Documentation available. On-site inspection is possible.