▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Sheet metal working [21 - 40 of 80]

Section Shear

Peddinghaus 219 Super 13 G

Germany

1984

used

on request

INNO28115

Bending capacity: angle iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, T-iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, max. U- and I-steel: NP 18, drive power: 3kW. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/2100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Guillotine Shear

Georg Eckart

Germany

1990

used

on request

INNO27915

An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible.

CNC Punching And Shearing Machine

Finn Power (prima Power) SG

Germany

2011

used

on request

INNO27839

Working range X/Y: 1500mm/3000mm, punching force: 30t, max. material thickness (punching): 8mm, max. working speed X/Y: 150m/min, tool stations: 21, multitool stations: 3, max. workpiece weight: 200kg, control: Siemens Sinumerik 840D. Including stacking unit (STS) and loading tower (Combo Tower). Documentation available. On-site inspection is possible.

CNC Press Brake

Ermaksan AP 4100x120

Germany

1996

used

on request

INNO27821

Pressing force: 1200kN, working width: 4100mm, stand distance: 3550mm, table width: 215mm, throat depth: 400mm, stroke: 800mm, working speed: 80mm/s, power: 11kW, weight: approx. 12000kg. Dokumentation vorhanden. An on-site inspection is possible.

CNC Punching and Nibbling Machine

Amada Arcade 210

Germany

1993

used

on request

INNO27782

Pressing force: 20t, stations: 9xA/5xB/2xD, auto-index stations: 2xB/1xC, max. mild steel thickness: 6.35mm, max. hole diameterR: 88.9mm, working dimensions X/Y: 1270mm/2540mm, max. workpiece weight: 100kg, travel X/Y: 1016mm/1270mm, rapid traverse X/Y: 70m/min, strokes 1mm/25mm pitch: 480/250/min, ram stroke: 32mm. Machine dimensions X/Y/Z: approx. 4500mm/2800mm/2200mm, weight: approx. 10000kg, control: Fanuc 16P. The oil tank of the machine is leaking. Documentation available. On-site inspection is possible.

Plate Shear

Fasti 506-16-2

Germany

unknown

used

on request

INNO27775

Working width: 1630mm, max. sheet steel thickness at 400N/mm² tensile strength: 2mm, power: 4kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1600mm, weight: approx. 2500kg. The blade of the machine is worn. An on-site inspection is possible.

Hydraulic Plate Shear

Promecan GH 1030 Z

Germany

unknown

used

on request

INNO27619

Cutting length: 3100mm, max. sheet thickness: 10mm, backgauge (X-axis): 0mm-1000mm, machine dimensions X/Y/Z: approx. 3600mm/2400mm/1800mm. Documentation available. On-site inspection is possible.

Guillotine Shear

Amada GPS 840

Germany

1992

used

on request

INNO27369

Cutting length: 4000mm, max. steel thickness: 8mm, max. stainless steel thickness: 6mm, max. aluminum thickness: 10mm, stroke: 190mm, motor power: 15kW, dimensions X/Y/Z: approx. 4600mm/2200mm/2200mm, control: Amada Promecam. An on-site inspection is possible.

Coil Cradle

Schmitz/psm

Germany

2007

used

on request

INNO27178

A Schmitz/PSM slitting line for sheet metal processing is available. Coil weight: 5t/6t, strip width: 650mm, strip thickness (stainless steel): 0,4mm-1,5mm, coil inner diameter: 400mm/508mm/610mm, coil outer diameter: 1740mm/2000mm, speed: 100m/min, working direction: right(left) / DX - SX. Components: Decoiler with paper winder, deflection rollers, foil device on both sides, strip guiding, strip cutter, scrap winder, recoiler, coil take-up cross, hydraulic units as well as various tools and sanding belts. On-site inspection is possible.

Section Shear

Geka Hydracop HYD-70

Germany

1992

used

on request

INNO27155

Punching force: 70t, max. punching capacity: 28mm/20mm, max. stroke: 80mm, working speed 19mm/20mm stroke: 48/37. Flat steel shears: Blade length: 455mm, max. cutting capacity length/thickness: 450mm/15mm. Angle steel shears: 90°: 130mm/130mm/13mm, 45°: 70mm/70mm/7mm. Round steel shears: Diameter: 45mm. Square steel shears: 45mm/45mm. Notch depth: 90mm, notch width: 52mm, material thickness: 13mm. Dimensions X/Y/Z: approx. 1300mm/2100mm/1800mm, weight: approx. 2400kg.

Deburring Machine

Lissmac SBM-S 1000

Germany

2007

used

on request

INNO27071

A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available.

Billet Shear

Peddinghaus 214/200

Germany

unknown

used

on request

INNO27021

A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg.

Hydraulic Steel Shear

Bernardo HPS 90

Germany

2018

used

on request

INNO26601

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm

Shearing Machine

Pivatic PivaCut

Germany

unknown

used

on request

INNO26491

Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.

CNC Press Brake

Trumpf TrumaBend V85S

Germany

1999

used

on request

INNO26378

Max. pressing force: 850kN, max. stroke: 365mm, compressed air supply: 6bar, connected load: 14kVA, weight: 9.95t, with documentation, without tools, was maintained regularly, an inspection is possible.

Punching Machine

Trumpf TRUMATIC 500

Germany

1994

used

on request

INNO26213

Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible.

Two-Roller Bending Machine

Faccin HCU 1250x3,0

Germany

1986

used

on request

INNO26202

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024.

Groove Punching Machine

Schuler Pressen N 16

Germany

1977

used

on request

INNO25852

Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation.

Three-Roller Bending Machine

Haeusler SIHRV 2000x13/10

Germany

2001

used

on request

INNO25715

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

CNC Four-Roller Bending Machine

Haeusler VRM-hy 3000x110/90

Germany

1989

used

on request

INNO25710

Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.