Bar Feeder

Kupa ServoFeed

Germany

2003

used

on request

INNO28338

A Kupa short bar loader is available. Feed length: 1750mm, max. bar length: 1500mm, bar diameter range: 4mm-85mm, power requirement: 1kW, machine dimensions X/Y/Z: approx. 1900mm/900mm/1600mm, weight: approx. 400kg. On-site inspection is possible.

more

Coiler

Schwabe MHM

Germany

unknown

used

on request

INNO28337

Coil outer diameter: 650mm, max. sheet width: 150mm, max. coil weight: 80kg, mandrel height: 1000mm, spreading range: 230mm-445mm, support arm length: 600mm. On-site inspection is possible.

more

Surface Grinding Machine

Blohm HFS 204

Germany

1973

used

on request

INNO28336

Table dimensions X/Y: 760mm/200mm, max. sanding length: 500mm, max. sanding width: 230mm, table spindle center distance: 520mm, table longitudinal movement: 30m/min, table transverse movement: 16mm/stroke. Grinding wheel diameter: 225mm, grinding wheel width: 25mm, bore: 51mm, power: 5kW. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1950mm, weight: approx. 2100kg. On-site inspection is possible.

more

Cylindrical Grinding Machine

Karstens

Germany

1974

used

on request

INNO28335

A Karstens cylindrical grinding machine with display is available. Center height: 180mm, grinding diameter: 360mm, center width: 650mm, max. workpiece weight flying/between centers: 70kg/250kg. Grinding wheel outer diameter: 400mm, face diameter: 250mm, peripheral speed: 35m/s, speed: 450rpm, mounting cone: MK4, quill diameter: 50mm, fine adjustment: 0.08mm. Machine dimensions X/Y: approx. 3250mm/2150mm, weight: approx. 3600kg. On-site inspection is possible.

more

Universal Milling Machine

Deckel FP 2

Germany

2019

used

on request

INNO28334

A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible.

more

Circular Mitre Saw

Kasto Kastodisc M6

Germany

2010

used

on request

INNO28333

Cutting range 90°: Round material: 120mm, square material X/Y: 85mm/85mm, flat material X/Y: 65mm/70mm. Cutting range left at 45°: round material: 70mm, square material X/Y: 65mm/65mm, flat material X/Y: 60mm/50mm. Cutting range right at 45°: round material: 80mm, square material X/Y: 70mm/70mm, flat material X/Y: 75mm/70mm. Saw blade diameter: 315mm, cutting speed: 53m/min, drive power: 1.9kW, material support height: 950mm, weight: approx. 170kg. Documentation available. On-site inspection is possible.

more

Plate Shear

Helmut Lotze 205.3000x16

Germany

1992

used

on request

INNO28330

Working width: 3040mm, max. sheet thickness: 16mm, upright width: 3040mm, throat depth: 200mm, fence width: 1000mm, motor power: 45kW, stroke rate: 22/min. Documentation available. On-site inspection is possible.

more

CNC Punching Machine

Finn Power F6

Germany

unknown

used

on request

INNO28329

A Finn-Power CNC punching press is available. Press force: 300kN, max. workpiece width: 4061mm, max. workpiece length: 1528mm, max. workpiece thickness: 8mm, max. workpiece weight: 200kg, quick chuck X/Y: 80m/min/60m/min. Turret head positions: 20, turret head speed: 30rpm, tool type: thick turret, max. tool diameter: 89mm. Travel speed: 100m/min, drilling accuracy: 0.1mm, positioning accuracy: 0.08mm, oil tank capacity: 330l, max. operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5900mm/6300mm/2500mm, weight: approx. 13500kg, control: Siemens Sinumerik 840D. The table of the machine has been extended. Without machine housing. Documentation available. On-site inspection is possible.

more

CNC Press Brake

Darley EHP 200

Germany

1989

used

on request

INNO28328

A Darley CNC press brake is available. Pressing force: 2000kN, working width: 5200mm, power: 15kW, oil capacity: 160l, machine dimensions X/Y/Z: approx. 5500mm/1900mm/3100mm, weight: approx. 20000kg. Including tools and accessories. Documentation available. On-site inspection is possible.

more

CNC Wide Belt Sanding Machine

Vobhag EFS 25-1/1

Germany

2001

used

on request

INNO28321

Working width: 250mm, belt speed: 7.5m/min, brush diameter: 150mm, machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, weight: approx. 4000kg, control: Siemens. The control of the machine shows problems. An on-site inspection is possible.

more

Wheel Blast Machine

Modena CM T10

Germany

2013

used

on request

INNO28311

Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible.

more

Differential-Way Press

Bruderer BDWP-AR14-3200.RK1E3

Germany

1992

used

on request

INNO28309

A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible.

more

CNC Lathe

Leadwell LT-25

Germany

1998

used

on request

INNO28305

Turning diameter: 450mm, turning length: 650mm, speed: 3500rpm, spindle clearance: 76.2mm, tool positions: 12, machine dimensions X/Y/Z: approx. 3800mm/1850mm/2000mm, weight: approx. 6200kg, control: Fanuc. Documentation available. On-site inspection is possible.

more

CNC Lathe

Leadwell LT-20

Germany

1997

used

on request

INNO28304

Turning diameter: 450mm, turning length: 640mm, spindle clearance: 75mm, speed: 3500rpm, spindle power: 15kW, tool positions: 12, machine dimensions X/Y/Z: approx. 3100mm/1900mm/2000mm, control: Fanuc. The machine is not ready for operation because the servo control module is defective. Documentation available. On-site inspection is possible.

more

CNC Vertical Lathe

Danobat Danumeric TV-200/CSM

Germany

2002

used

on request

INNO28299

A Danobat CNC vertical lathe including accessories is available. Workpiece diameter: 200mm, workpiece turning diameter: 300mm, roller bearing inner diameter: 140mm, spindle inner diameter: 50mm, chuck diameter: 210mm, speed: 4700rpm. Tool positions: 8, feed X/Z: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2000mm/3000mm, control: Siemens Sinumerik 810D. Including pick-up function and pallet magazine EWAB. Documentation available. On-site inspection is possible.

more

CNC Lathe

Gildemeister CTX 200 S2

Germany

1999

used

on request

INNO28296

Rotation diameter over bed/slide: 440mm/210mm, turning length: 350mm, travel X/Z: 160mm/350mm, rapid traverse X/Z: 20m/30m/min, speed: 5000rpm, spindle bore: 56mm, power: 9kW, torque: 84Nm. Quill holder: MK3, quill diameter: 80mm, tailstock travel: 350mm, tool positions: 12, tool holder: VDI 20, machine dimensions X/Y/Z: approx. 3400mm/1200mm/1550mm, weight: approx. 3700kg, control: Heidenhain CNC Pilot, operating hours: 75035h. The machine displays error messages approx. twice a day, which are rectified after a restart. Documentation available. On-site inspection is possible. Expected to be available from the end of April 2025.

more

CNC Die Sinking Machine

Agie Agietron Integral 3

Germany

1997

used

on request

INNO28292

Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible.

more

Radial Drilling Machine

G. Breda R 45 1210

Germany

1990

used

on request

INNO28290

Drilling capacity steel/cast iron: 45mm/55mm, spindle mount: Morse taper MK5, throat depth: 1210mm, quill stroke: 310mm, speed: 1250rpm, feed rate: 1.35mm/rev, spindle table distance min./max.: 525mm/1690mm, table dimensions X/Y: 1900mm/1100mm. Machine dimensions X/Y/Z: approx. 3000mm/1100mm/3000mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

more

CNC Lathe

Fat TUR 630 MN 2000

Germany

2000

used

on request

INNO28289

Turning diameter over bed/face slide: 630mm/370mm, center distance: 2000mm, bed width: 433mm, speed: 2500rpm, spindle bore: 105mm. Feed: 3200mm/min, tool holder: VDI 40, turret positions: 8, quill diameter: 90mm, motor power: 18.5kW. Machine dimensions X/Y/Z: approx. 3700mm/2200mm/1800mm, weight: approx. 4000kg, control: Siemens Sinumerik 810D Manual Turn. The control of the machine is defective. Documentation available. On-site inspection is possible.

more

CNC Profile Machining Center

Emmegi Phantomatic X4

Germany

2011

used

on request

INNO28283

A CNC aluminum profile processing center Emmegi including a corner joining machine Pressta 1800 is available. Axes: 4, travel X/Y/Z: 4300mm/270mm/300mm, speed: 20000rpm, tool positions: 4, angle machining heads: 2, max. magazine saw blade diameter: 180mm, tapping capacity: M8, machine dimensions X/Y: approx. 5000mm/1300mm, weight: approx. 2200kg, spindle hours: 14422h. Documentation available. On-site inspection is possible. Expected to be available from January 2025.

more

All Offers / Metal processing machines