Innovac GmbH Used machines from Germany
Innovac used-machines Metal processing machines [61 - 80 of 913]
Blank-Stack-Turner-Intec-Blechplatinen used
Blank Stack Turner
Intec Blechplatinen
Germany
2006
used
on request
INNO28791
A blank turner for sheet metal blanks is available. Max. Blank dimensions X/Y: 1600mm/1100mm, max. blank stack height: 190mm, max. stack weight: 1500kg, max. stack inclination: 15°, cycle time with pallets: approx. 30s, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2500mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.
Stripping-Press-Bartolin-Kemo-P-70 used
Stripping Press
Bartolin Kemo P 70
Germany
1998
used
on request
INNO28790
Two identical strip presses are available. Press force: 70t, stroke: 160mm, stroke rate: 112 strokes/min, stations: 4, strip dimensions X/Y: 308.3mm/978mm, connected load: 10kW, weight: approx. 10200kg. Documentation available. On-site inspection is possible.
Spring-Coiling-Machine-Schenker-15E used
Spring Coiling Machine
Schenker 15E
Germany
1995
used
on request
INNO28783
A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple lifting device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, outer spring diameter: 2mm-30mm, connected load: 3.1kW, production output: 400 springs/min, machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible.
CO2-Laser-Cutting-Machine-Amada-LC-2415-Alpha-II-Resonator-C-1500 used
CO2 Laser Cutting Machine
Amada LC-2415 Alpha II/Resonator C-1500
Germany
1998
used
on request
INNO28779
Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible.
Powder-Coating-Plant-Itw-Gema-MagicCenter used
Powder Coating Plant
Itw Gema MagicCenter
Germany
2010
used
on request
INNO28777
A complete and automated ITW Gema powder coating system is available. Baffle plate diameter: 16mm/24mm/32mm, powder hose inner diameter: 11mm, cable length: 6000mm. Positioning accuracy: +/-5mm, lifting speed: 0.6m/s, max. load: 50kg, max. cable length: 20m, lifting device dimensions X/Y/Z: approx. 460mm/750mm/2900mm. Travel distance: 1400mm, height allowance: 227mm, air consumption: 1400m³/h. Components: 1) ITW Gema powder coating unit 10P, ITW Gema axis system, ITW Gema control unit, ITW Gema MagicCenter. Documentation available. On-site inspection is possible.
CNC-Universal-Milling-Machine-Maho-MH-1000-C used
CNC Universal Milling Machine
Maho MH 1000 C
Germany
1984
used
on request
INNO28775
A Maho CNC universal tool milling machine is available. Travel X/Y/Z: 1000mm/560mm/800mm, table dimensions X/Y: 1150mm/800mm, tool holder: ISO50, speed: 2000rpm, feed: 3m/min, rapid traverse: 6m/min, max. table load: 800kg. Machine dimensions X/Y/Z: approx. 4600mm/2300mm/3000mm, weight: approx. 7500kg. The control system was overhauled and renewed in 2007. An on-site inspection is possible.
Universal-Milling-Machine-Correa-F-2-UE used
Universal Milling Machine
Correa F 2 UE
Germany
1980
used
on request
INNO28769
Travel X/Y/Z: 440mm/1200mm, table dimensions X/Y: 440mm/1200mm, spindle mount: ISA 40, speed: 1800rpm, feed X/Y: 630mm/min, feed Z: 224mm/min, machine dimensions X/Y/Z: approx. 2150mm/2000mm/2100mm, weight: approx. 2400kg. Documentation available. On-site inspection is possible.
Smelting-Furnace-Rauch-ZSO-700-B used
Smelting Furnace
Rauch ZSO 700 B
Germany
1995
used
on request
INNO28768
A smoke melting system is available. Components: Furnace, conveyor belt, electric stacker, melting container, ingot casting belt. Total plant dimensions X/Y/Z: approx. 6000mm/3500mm/3800mm, total plant weight: approx. 4500kg. Documentation available. On-site inspection is possible.
CNC-Tool-Grinding-Machine-Schütte-WU405 used
CNC Tool Grinding Machine
Schütte WU405
Germany
1999
used
on request
INNO28767
Travel X/Y/Z: 540mm/280mm/260mm, W-axis: 360°, A-axis: 330°, speed: 12000rpm, tool holder: HSK 50E, sanding length: 500mm, sanding diameter: 300mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D. Including a new spindle and a paper belt filter Polo SB-A0.4-0600, year of manufacture: 1998, flow rate: 220l/min. Documentation available. On-site inspection is possible.
Dry-Kiln-Vötsch-VTL-125-200 used
Dry Kiln
Vötsch VTL 125/200
Germany
2006
used
on request
INNO28765
Internal dimensions X/Y/Z: 1250mm/2000mm/1250mm, useful chamber volume: 3.215m³, nominal temperature: 250°C, minimum exhaust air flow: 480m³/h, connected load: 40kW, machine dimensions X/Y/Z: approx. 2200mm/3050mm/1700mm, weight: approx. 1150kg. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Enshu-WE30Ve used
CNC Machining Center
Enshu WE30Ve
Germany
unknown
used
on request
INNO28763
Travel X/Y/Z: 700mm/400mm/300mm, table dimensions X/Y: 650mm/400mm, max. table load: 350kg, spindle mount: BT30, speed: 12000rpm, power: 5.5kW, torque: 82.7Nm. Rapid traverse: 50m/min, feed: 50m/min, tool positions: 21, tool diameter: 75mm, tool length: 210mm, tool weight: 3kg. Machine dimensions X/Y/Z: approx. 2550mm/1450mm/2900mm, control: Fanuc 0iMF. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Enshu-Je30S used
CNC Machining Center
Enshu Je30S
Germany
unknown
used
on request
INNO28762
Travel X/Y/Z: 500mm/350mm/300mm, table dimensions X/Y: 320mm/320mm, max. table load: 450kg, speed: 13000rpm, spindle power: 5.5kW, spindle mount: HSK40, tool positions: 24, max. tool diameter: 75mm, max. tool length: 200mm, max. tool weight: 3kg, rapid traverse: 60m/min. Machine dimensions X/Y/Z: approx. 4200mm/1250mm/2450mm, weight: 4400kg, control: Fanuc Series 21i-MB. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Kitamura-MyCenter-HX3000iG used
CNC Machining Center
Kitamura MyCenter HX3000iG
Germany
2018
used
on request
INNO28761
Travel X/Y/Z: 460mm/510mm/560mm, table dimensions X/Y: 305mm/305mm, speed: 15000rpm, power: 22kW, tool positions: 50, tool diameter: 95mm, tool weight: 10kg, max. workpiece diameter: 500mm, max. workpiece height: 745mm. Rapid traverse: 60m/min, B-axis speed: 150rpm, positioning accuracy: +/-0.001mm, power consumption: 45kVA, control: Arumatik. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Ingersoll-High-Speed-Eagle-V9 used
CNC Machining Center
Ingersoll High Speed Eagle V9
Germany
2019
used
on request
INNO28760
An Ingersoll CNC 5-axis machining center including automation is available. Travel X/Y/Z: 800mm/600mm/500mm, C-axis: 360°, B-axis swivel range: -60°/140°, speed: 36000rpm, main spindle power: 15kW. Table diameter: 600mm, max. table load: 2000kg, max. workpiece height: 400mm. Tool positions: 72, tool holder: HSK E50, max. tool diameter: 50mm/60mm, max. tool length: 260mm. Rapid traverse: 30m/min, feed rate: 15m/min, control: Heidenhain iTNC 640, operating hours: 48887h, spindle hours: 19040h. Including chip conveyor, cooling, automation Multichange light, distance measuring system, tool measurement Blum Laser, extraction system, extraction system for fine dust, measuring probe and table clamping system Erowa UPC. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Huron-KX-50 used
CNC Machining Center
Huron KX 50
Germany
2010
used
on request
INNO28759
Travel X/Y/Z: 2000mm/1700mm/800mm, speed: 20000rpm, spindle power: 43kW/64kW, table dimensions X/Y: 2200mm/1000mm, table load capacity: 4000kg, max. workpiece height: 800mm. Tool positions: 30, tool holder: HSK 63 A, max. tool diameter: 90mm, max. tool length: 300mm, rapid traverse: 40m/min, feed: 30m/min. Control: Heidenhain iTNC 530, operating hours: 112274h, total spindle hours: 40233h, current spindle hours: 9915h. Including chip conveyor, IKZ, Blum tool probe, Blum laser tool measurement, vibration control, spray gun, internal air cooling and oil mist extraction. The machine only runs on 3 axes. Documentation available. On-site inspection is possible.
CNC-Vertical-Machining-Center-Deckel-Maho-DMC-835-V used
CNC Vertical Machining Center
Deckel Maho DMC 835 V
Germany
2006
used
on request
INNO28758
Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Deckel-Maho-DMC-105-V-Linear used
CNC Machining Center
Deckel Maho DMC 105 V Linear
Germany
2008
used
on request
INNO28757
Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Deckel-Maho-DMC-105-V-Linear used
CNC Machining Center
Deckel Maho DMC 105 V Linear
Germany
2006
used
on request
INNO28756
Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.
CNC-Laser-Cutting-Machine-Trumpf-TruLaser-5030-L16 used
CNC Laser Cutting Machine
Trumpf TruLaser 5030 (L16)
Germany
2008
used
on request
INNO28755
Laser: CO2, laser power: 5000W (5kW), travel X/Y/Z: 3000mm/1500mm/115mm, laser source: CO2 laser TruFlow 5000, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, positioning speed: 85m/min. Machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, control: Siemens Sinumerik 840D, laser hours: 55509h, beam hours: 17579h. Documentation available. On-site inspection is possible.
CNC-Tool-Grinding-Machine-Walter-Heli-Power used
CNC Tool Grinding Machine
Walter Heli-Power
Germany
2003
used
on request
INNO28754
A total of seven similar Walter CNC tool grinding machines are available. Travel X/Y/Z: 460mm/320mm/660mm, axes: 5, rotary table swivel range: +/-200°, workpiece diameter: 320mm, workpiece length: 350mm, workpiece weight: 50kg. Spindle speed: 7000rpm, spindle diameter: 80mm, max. grinding wheel diameter: 200mm. Machine dimensions X/Y/Z: approx. 2500mm/3000mm/2300mm, weight: approx. 4200kg, control: Walter HMC 600 CNC. Documentation available. On-site inspection is possible. Individual sale possible.