Innovac GmbH Used machines from Germany
Innovac used-machines Metal processing machines [501 - 520 of 912]
Hydraulic-Aggregate-Schenck-PP-165BB used
Hydraulic Aggregate
Schenck PP 165BB
Germany
1992
used
on request
INNO27166
Nominal flow rate: 165l/min, max. pressure: 315bar, tank volume: 1m³.
Welding-Cell-Heinz-dalex-kuka-H200-RC30-52 used
Welding Cell
Heinz/dalex/kuka H200/RC30/52
Germany
1995
used
on request
INNO27165
A welding cell with Kuka robot is available. Robot: nominal payload: 30kg, max. payload: 36kg, reach: 2100mm, number of axes: 6, repeat accuracy: +/-0.06mm. Dalex welding machine: electrode force: 215-1290daN, rated power: 100kvA, throat depth: 250mm, stroke: 200mm, weight: 720kg.
Hydraulic-Press-Wmw-PYE-63-S-1M used
Hydraulic Press
Wmw PYE 63 S/1M
Germany
unknown
used
on request
INNO27164
Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg.
Hydraulic-Frame-Press-Knuth-HRP-150 used
Hydraulic Frame Press
Knuth HRP-150
Germany
1996
used
on request
INNO27163
Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg.
Section-Shear-Geka-Hydracop-HYD-70 used
Section Shear
Geka Hydracop HYD-70
Germany
1992
used
on request
INNO27155
Punching force: 70t, max. punching capacity: 28mm/20mm, max. stroke: 80mm, working speed 19mm/20mm stroke: 48/37. Flat steel shears: Blade length: 455mm, max. cutting capacity length/thickness: 450mm/15mm. Angle steel shears: 90°: 130mm/130mm/13mm, 45°: 70mm/70mm/7mm. Round steel shears: Diameter: 45mm. Square steel shears: 45mm/45mm. Notch depth: 90mm, notch width: 52mm, material thickness: 13mm. Dimensions X/Y/Z: approx. 1300mm/2100mm/1800mm, weight: approx. 2400kg.
CNC-Tool-Grinding-Machine-Anca-PGX-Grinder used
CNC Tool Grinding Machine
Anca PGX Grinder
Germany
1999
used
on request
INNO27151
Grinding wheel diameter: 200mm, max. grinding diameter/length: 150mm/760mm, travel X/Y/Z: 760mm/460mm/360mm, swivel range A/C: 270°/360°, speed: 3000rpm. Dimensions X/Y/Z: approx. 2200mm/2100mm/2700mm, weight: approx. 6500kg.
CNC-Punch-Grinding-Machine-Anca-PGX+ used
CNC Punch Grinding Machine
Anca PGX+
Germany
2007
used
on request
INNO27150
Spindle power: 22kW, grinding wheel diameter: 762mm, grinding wheel speed: 3000rpm, max. punching size: 150mm.
Surface-Grinding-Machine-Monoprecis-114S used
Surface Grinding Machine
Monoprecis 114S
Germany
1984
used
on request
INNO27149
Table size X/Y: 500mm/200mm, max. table load: 200kg, longitudinal movement/transverse movement: 540mm/240mm, table grinding wheel distance: 400mm, grinding wheel size: 180mm/32mm/20mm, speed: 2850rpm. Dimensions X/Y/Z: approx. 1500mm/1100mm/2000mm, weight: approx. 1500kg.
CNC-Lathe-Hardinge-SG-42 used
CNC Lathe
Hardinge SG-42
Germany
unknown
used
on request
INNO27148
Max. swing diameter over bed: 540mm, max. turning diameter: 240mm, max. machining length: 330mm, traverse path: X/Y: 135mm/350, spindle bore: 40mm, speed: 4400rpm. Tool positions: 12, max. tool size square/round: 19mm/31mm, chuck size: 152mm, traversing speed X/Z: 12/16 m/min. Dimensions X/Y/: approx. 2200mm/1700mm/1700mm, weight: approx. 3600kg, control: GE Fanuc 18T.
Internal-Cylindrical-Grinding-Machine-Overbeck-Zetto-30 used
Internal Cylindrical Grinding Machine
Overbeck Zetto 30
Germany
1986
used
on request
INNO27147
Center height: 80mm, sanding length: 120mm, jaw chuck diameter: 125mm, max. sanding diameter: 80mm.
Wire-EDM-Machine-Agie-charmilles-mitsubishi-Agietron-D20-SA110 used
Wire EDM Machine
Agie/charmilles/mitsubishi Agietron/D20/SA110
Germany
1993
used
on request
INNO27134
Four old wire-cutting machines are available. 1) Mitsubishi SA110, year of manufacture: 1999. 2) Agie Agietron with AgiePuls. 3) Mitsubishi 4-wire 110H. 4) Charmilles D20. All machines in need of repair.
Automatic-Punching-and-Bending-Machine-Bihler-GRM-50 used
Automatic Punching and Bending Machine
Bihler GRM-50
Germany
1979
used
on request
INNO24616
Three Bihler GRM-50 are available, year of manufacture: 2x 1979, 1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg.
Surface-Lathe-Ravensburg-PKZ-20 used
Surface Lathe
Ravensburg PKZ 20
Germany
1963
used
on request
INNO27109
Center height: 930mm, center width: 3000mm, turning diameter over faceplate/bed: 2200mm/1700mm, max. workpiece weight in the chuck holder/in the centers: 3000kg/8000kg, spindle bore: 80mm, faceplate speed: 180rpm, dimensions X/Y/Z: approx. 4000mm/1500mm/1800mm, weight: approx. 24000kg. Documentation available. On-site inspection is possible.
CNC-Press-Brake-Eht-EHPS-20-35 used
CNC Press Brake
Eht EHPS 20-35
Germany
1995
used
on request
INNO27107
Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.
Parts-Cleaning-System-Rosink-Cleaner-1650 used
Parts Cleaning System
Rosink Cleaner 1650
Germany
2009
used
on request
INNO27095
Cleaning capacity at 5bar: 400l/min, basket load: 1000kg, basket speed: 10rpm, lye volume: 420l, usable basket diameter: 1650mm, usable internal height: 650mm. Dimensions X/Y/Z: 2200mm/2700mm/1300mm, weight: approx. 1700kg.
Vertical-Eroding-Machine-Agie-Agietron-Integral-2 used
Vertical Eroding Machine
Agie Agietron Integral 2
Germany
1994
used
on request
INNO27094
Travel X/Y/Z: 350mm/250mm/350mm, tank dimensions X/Y/Z: 670mm/600mm/250mm, table dimensions X/Y: 800mm/600mm, max. workpiece dimensions X/Y/Z: 1070mm/735mm/450mm, max. workpiece electrode weight: approx. 400kg/100kg, speed: 820mm/min. Dimensions X/Y/Z: approx. 2000mm/2500mm/3000mm, weight: approx. 3000kg, control: Agiematic T. Documentation available.
CNC-Machining-Center-Mazak-VTC-200C used
CNC Machining Center
Mazak VTC-200C
Germany
2001
used
on request
INNO27084
Travel X/Y/Z: 1660mm/510mm/510mm, speed: 12000rpm, table dimensions X/Y: 2000mm/510mm, max. workpiece weight: 1000kg, tool diameter: 80mm, control: Fusion 640M. Dimensions X/Y/Z: approx. 4200mm/3000mm/2700mm, weight: approx. 7200kg, operating hours: 127085h. Including chip conveyor, partition wall for pendulum machining and more. Documentation available.
CNC-Universal-Milling-Machine-Mikron-WF-51C-155 used
CNC Universal Milling Machine
Mikron WF 51C/155
Germany
unknown
used
on request
INNO27081
Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available.
CNC-Surface-Grinding-Machine-Okamoto-ACC63DXNC used
CNC Surface Grinding Machine
Okamoto ACC63DXNC
Germany
2004
used
on request
INNO27080
A high-precision Okamoto grinding machine is available. Accuracy: Input steps up to 0.00001 inch, travel X/Y/Z: 750mm/340mm/347mm, max. table height: 347mm, magnet dimensions X/Y/Z: 600mm/300mm/80mm, max. workpiece height: 347mm, feed: 25mm/min, speed: 1800rpm, max. workpiece weight: 420kg. Dimensions X/Y/Z: approx. 2800mm/2000mm/2400mm, weight: approx. 2800kg. Documentation available.
Deburring-Machine-Lissmac-SBM-S-1000 used
Deburring Machine
Lissmac SBM-S 1000
Germany
2007
used
on request
INNO27071
A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available.