CNC Milling Machine

Isel-automation CNC-Multi-K

Germany

1999

used

on request

INNO29832

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

more

CNC Milling Machine

Isel-automation MSF 4433

Germany

1996

used

on request

INNO29831

X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

more

Disc Grinding Machine

Timesavers Int. Bv GRINDMASTER 3000

Germany

2001

used

on request

INNO29830

Continuously adjustable feed speed: 2-10m/min, vacuum table with water separator, filter system with pump, also suitable for small parts up to 80x80mm, also suitable for printed circuit boards and carbide parts, no over-grinding of coated surfaces (e.g. Alclad, foils, galvanized sheets), spray nozzle centrally above the disc, additional water line for coolant, separate valves for coolant and spray nozzles. Total height: 3425mm, working height: 2025mm, working level: 790-940mm (adjustable), length: 2850mm, width: 1800mm, length of the middle segment: 900mm, side distances left/right: 755/900mm. No defects known, completely overhauled in 2017, in operation until 2020. Including centrifuge, documentation and maintenance reports. An on-site inspection is possible.

more

Punch Laser Machine

Trumpf TRUMATIC 6000L

Germany

2001

used

on request

INNO29829

Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible.

more

Surface Grinding Machine

Majevica BRB 75.30.2KA

Germany

unknown

used

on request

INNO29827

Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulically and continuous: 0.5-6m/min, volume of the hydraulic unit: 35l, cooling device for grinding wheel/on demand: 30l. No defects known, with documentation, an on-site inspection is possible.

more

Stud Welding Machine

Soyer BMK-12W

Germany

2000

used

on request

INNO29822

Gun: PH-3N, voltage: 400V, weight: 50kg. Supplied with operating manual, 2x ground cables with clamp BMS/BMK, gas connection, HZ-stud holder, adapter piece and key. An on-site inspection is possible.

more

Electrostatic Paint Spraying System

Blo Delphin

Germany

2011

used

on request

INNO29821

The machine is in very good condition and ready for operation. An on-site inspection is possible.

more

CNC Lathe

Gildemeister CTX 200E

Germany

1998

used

on request

INNO29818

Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools.

more

CNC Universal Milling Machine

Deckel Maho DMU 50T

Germany

1998

used

on request

INNO26767

Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.

more

Spark Erosion Machine

Wagner Maschinen DM-323

Germany

1988

used

on request

INNO29811

Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.

more

Centrifugal Disc Finishing Unit

Walther Trowal TT 90-A/2C-V9

Germany

2018

used

on request

INNO29802

Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible.

more

Thread Milling Machine

Mikron 132.02

Germany

unknown

used

on request

INNO29795

Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.

more

CNC Double-Spindle Turning Milling Center

Spinner TTS 65-DUPLEX

Germany

2020

used

on request

INNO29791

X1-/ X3-axis: 180mm, X2-axis: 180mm, Y1-/ Y3-axis: ±45mm, Z1-/ Z3-axis: 704mm, Z2-axis: 620mm, E2-axis: 720mm, rapid traverse X, Y, Z-axis: 30m/min, spindle 1: max. speed: 5000/min, spindle bore: 65mm, chuck diameter: 210mm, spindle 2: max. speed: 7000/min, spindle bore: 42mm, max. chuck diameter: 140mm, spindle nose diameter: 110mm, max. chuck jaw weight: 1.25kg, number of stations: 2x12, number of driven tool stations: 2x12, max. speed: 8000/min, power S3 25%: 4.3kW, torque S3 25%: 13.6Nm. Length: 2880mm, width: 2130mm, height: 1990mm, weight: 7.5t, operating hours: 16,597.7h. Including bar feeder Top Automazioni X-FILES S, year of manufacture 2020, 4x tool holders, straight, left-right square mount, external coolant, 4x machine interface: BT45A, 1x milling head 90°/BMT 45 Spinner, angled milling head/ BMT45/ ESX-25 right and left twin-spindle, Spinner flat coupling, ER25 max. speed: 6000/min, i=1:1, raised design with center distance 85mm, 1x cut-off holder, rotation direction universal, external coolant. Regularly maintained, maintenance records available, an on-site inspection is possible.

more

Wire EDM Machine

Agie AGIECUT 220

Germany

1995

used

on request

INNO29790

X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible.

more

Planing Machine

Waldrich 30

Germany

unknown

used

on request

INNO29762

An old plano milling machine (guideway grinding machine) Waldrich Coburg is available. Bed length: 5500mm, bed width: 750mm, machine dimensions X/Y/Z: approx. 12000mm/300mm/3000mm, weight: approx. 37500kg. An on-site inspection is possible.

more

Gear Grinding Machine

Reishauer RZ 362

Germany

2018

used

on request

INNO29757

A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.

more

CNC Press Brake

Darley MF 2502

Germany

2000

used

on request

INNO29752

Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.

more

Notching Machine

Elumatec AKS 134

Germany

2001

used

on request

INNO29744

A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

more

CNC Machining Center

Chiron Mill 6000 High Speed

Germany

2004

used

on request

INNO29742

A machining center Chiron, which was completely overhauled in 2013, is available. Travel path X/Y: 6000mm/630mm, rapid traverse: 60m/min, tool positions: 92, tool holder: HSK-A63, speed: 12000rpm, torque: 140Nm, milling axes: 5, weight: approx. 20000kg, control: Siemens S840D, operating hours: 77344h. Includes scraper belt conveyor, OKZ preparation, Knoll VRF 250 vacuum rotary filter, high-pressure pump (70bar), emulsion mist extraction (2x800m³/h), central partition for pendulum machining, hydraulic unit (210bar), and Kohn linear clamping system with 8x hydraulic vices Multi 2000MFS 125/680 HD. Documentation available. An on-site inspection is possible.

more

Radial Drilling Machine

Wagner PRC 35

Germany

1988

used

on request

INNO29740

Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible.

more

All Offers / Metal processing machines