Innovac GmbH Used machines from Germany
Innovac used-machines Metal processing machines [441 - 460 of 936]
CNC-Universal-Milling-Machine-Reckermann-Delta1300-K used
CNC Universal Milling Machine
Reckermann Delta1300 K
Germany
2008
used
on request
INNO27790
Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible.
Lathe-Wagner-DCG-160 used
Lathe
Wagner DCG 160
Germany
1990
used
on request
INNO27789
Center height: 160mm, center distance: 750mm/1000mm, turning diameter over bed/cross slide: 320mm/175mm, max. workpiece length: 750mm, spindle bore: 30mm, taper: Morse taper no. 5, speed: 1980rpm, quill travel: 95mm, motor power: 4kW. Machine dimensions X/Y/Z: approx. 2400mm/1200mm/2600mm, weight: approx. 1800kg. Documentation available. On-site inspection is possible.
Rotary-Kiln-Tanabe used
Rotary Kiln
Tanabe
Germany
2023
used
on request
INNO27787
An originally packed and unused Tanabe rotary kiln with all necessary accessories is available. 1) Rotary kiln: length: 17m, height: 2400mm (+400mm/600mm increase), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (900°C possible with retort change and heating upgrade), feed: screw feeder, speed control of the rotary kiln: 0.5U-2U/min, weight: approx. 23500kg, including separate supply air heater. 2) Rotary tube cooler: length: 10600mm, height: 1600mm (+400mm/600mm increase), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with water circuit, speed control: 1.1U-4.3U/min, outlet: rotary valve, weight: approx. 8200kg. 3) Exhaust air filter including exhaust air fan, HEPA filter and dust collector with a temperature tolerance of 250°C. Control system: Siemens system control for local operation, 3x HMIs, several control panels and control cabinets. Including various accessories such as spare parts, transportation aids and associated smaller devices. The entire system is brand new and is still in its original packaging. The pictures were taken at the place of manufacture. Documentation available. On-site inspection is possible.
CNC-Milling-Machine-Dmg-Mori-CMX-1100-V used
CNC Milling Machine
Dmg Mori CMX 1100 V
Germany
2019
used
on request
INNO27777
Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible.
Plate-Shear-Fasti-506-16-2 used
Plate Shear
Fasti 506-16-2
Germany
unknown
used
on request
INNO27775
Working width: 1630mm, max. sheet steel thickness at 400N/mm² tensile strength: 2mm, power: 4kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1600mm, weight: approx. 2500kg. The blade of the machine is worn. An on-site inspection is possible.
CNC-External-Cylindrical-Grinding-Machine-Studer-S31-CNC used
CNC External Cylindrical Grinding Machine
Studer S31 CNC
Germany
1999
used
on request
INNO27773
Center height: 175mm, grinding length: 650mm, B-axis: -15°/195°, workpiece speed: 1750rpm, grinding wheels T1/T2: 500mm/400mm, bore: 203mm, max. workpiece weight: 80kg, workhead: MK4, tailstock: MK3. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/2100mm, weight: approx. 4000kg, operating hours: 56300h, control: GE Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025.
CNC-External-Cylindrical-Grinding-Machine-Studer-S30-leanPRO used
CNC External Cylindrical Grinding Machine
Studer S30 leanPRO
Germany
1996
used
on request
INNO27772
Center height: 175mm, center length: 1000mm, workpiece speed: 1750rpm, external grinding diameter: 400mm, bore: 127mm, swivel: 0°-120°, max. workpiece weight: 130kg, workhead: MK5, tailstock: MK3. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/1900mm, weight: approx. 5000kg, operating hours: approx. 59600h, control: GE Fanuc Series 16-T. Documentation available. On-site inspection is possible.
CNC-Circular-Grinding-Machine-Bahmüller-ASP-650-CNC used
CNC Circular Grinding Machine
Bahmüller ASP 650 CNC
Germany
1996
used
on request
INNO27771
Sanding length: 650mm, max. sanding diameter: 508mm, center height: 125mm, workhead speed: 1500rpm, max. workpiece weight: 30kg, workpiece swivel range: 30°-90°, tailstock: MK3. Grinding wheel diameter: 508mm, grinding wheel width: 40mm, bore: 203mm, max. internal grinding diameter: 150mm. Machine dimensions X/Y/Z: approx. 4300mm/3100mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik 820G. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025.
Eccentric-Press-Ruhrmann-EVR-125 used
Eccentric Press
Ruhrmann EVR 125
Germany
unknown
used
on request
INNO27764
Pressing force: 1250kN, stroke rate: 55/min, max. switching frequency: 50/min, ram stroke: 8mm-120mm, ram adjustment: 80mm, power: 7.5kW, safety clearance: 340mm, weight: approx. 8700kg. The machine has a hairline crack on the main shaft. On-site inspection is possible.
Wire-Drawing-Plant-Koch-KHZ-6300 used
Wire Drawing Plant
Koch KHZ 6300
Germany
1992
used
on request
INNO27758
A wire drawing plant is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 6300, year of manufacture: 1992, number of pulls per block: 1, drawing drum diameter: 700mm, pulling force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of manufacture: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Documentation available. On-site inspection is possible.
Mesh-Welding-System-Evg-TSD-7-25 used
Mesh Welding System
Evg TSD 7-25
Germany
1992
used
on request
INNO27757
Carrier type: KT8, carrier height: 90mm-250mm, upper belt diameter: 5mm-12mm, upper belt surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower belt diameter: 4mm-10mm, lower belt surface: smooth/ribbed, max. carrier length: 14000mm, cutting grid: 100/200mm, run-off plate: 5. Stacker SVH included. Documentation available. On-site inspection is possible.
Mesh-Welding-System-Evg-TSD-7-25 used
Mesh Welding System
Evg TSD 7-25
Germany
1993
used
on request
INNO27756
Carrier type: KT8, carrier height: 90mm-250mm, upper belt diameter: 5mm-12mm, upper belt surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower belt diameter: 4mm-10mm, lower belt surface: smooth/ribbed, max. carrier length: 14000mm, cutting grid: 100/200mm, run-off plate: 5. Stacker SVH included. Documentation available. On-site inspection is possible.
Mesh-Welding-System-Filzmoser-GH300-70 used
Mesh Welding System
Filzmoser GH300/70
Germany
1994
used
on request
INNO27755
Beam type: KT8, beam height: 60mm-300mm, upper beam diameter: 5mm-12mm, upper beam surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower beam diameter: 5mm-12mm, lower beam surface: smooth/ribbed, max. beam length: 14600mm, cutting grid: 100/200mm. Documentation available. On-site inspection is possible.
Mesh-Welding-System-Filzmoser-GH73-ST used
Mesh Welding System
Filzmoser GH73/ST
Germany
1994
used
on request
INNO27754
Beam type: KTS, beam height: 80mm-300mm, upper beam diameter: 5mm, upper beam surface: smooth/ribbed, diagonal diameter: 7mm, diagonal surface: smooth, lower beam diameter: 5mm, lower beam surface: smooth/ribbed, max. beam length: 14000mm, cutting grid: 200mm. Documentation available. On-site inspection is possible.
Lathe-Weipert-W500 used
Lathe
Weipert W500
Germany
1972
used
on request
INNO27749
Rotation diameter over bed: 530mm, turning length: 800mm, center distance: 1000mm, bore: 63mm, max. quill adjustment: 225mm, speed: 900rpm, spindle power: 15kW. Machine dimensions X/Y/Z: approx. 2700mm/1400mm/1300mm, weight: approx. 3300kg. Documentation available. On-site inspection is possible.
Lathe-Schaerer-UD-500 used
Lathe
Schaerer UD 500
Germany
1965
used
on request
INNO27748
Swing diameter over bed/face slide: 520mm/310mm, max. center distance: 3000mm, spindle bore: 62mm, taper diameter: 70mm, three-jaw chuck clamps up to: 315mm, wheel width: 68mm, wheel diameter: 168mm/200mm, spindle power: 20kW, machine dimensions X/Y/Z: approx. 5000mm/1300mm/1300mm, weight: approx. 4000kg. The lathe has been converted for knurling, so normal turning work is not possible. Documentation available. On-site inspection is possible.
Welding-Robot-Cell-Reis-TYPRV20-16-RSVI used
Welding Robot Cell
Reis TYPRV20-16-RSVI
Germany
2015
used
on request
INNO27746
Welding robot: RV20-16 with turntable, welding source: Merkle High Pulse 551 RS, positioner: integrated welding positioner, cabin equipment: double station with high-speed doors, welding type: MIG/MAG welding. Machine dimensions X/Y/Z: approx. 3800mm/2400mm/2200mm, weight: approx. 3750kg. Including all available tools, spare parts and accessories. Documentation available. On-site inspection is possible.
Cold-Press-Dr.-Fritsch-KP-35 used
Cold Press
Dr. Fritsch KP 35
Germany
2000
used
on request
INNO27741
A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.
CNC-Lathe-Mazak-SQT-25-MS used
CNC Lathe
Mazak SQT 25 MS
Germany
1999
used
on request
INNO27737
Turning diameter: 300mm, turning diameter: 525mm, turning length: 550mm, spindle bore: 76mm, max. bar diameter: 64mm, max. chuck diameter: 250mm. Spindle speed: 4000rpm, spindle power: 22kW, max. spindle torque: 351Nm, spindle nose-turret face distance: 115mm-690mm. Tool slots: 12, shank diameter: 25mm, drill shank diameter: 40mm, max. turret indexing time: 0.2s-0.6s. Traverse path X/Z/counter spindle: 190mm/575mm/585mm, rapid traverse X/Z: 30m/min, rapid traverse C: 400rpm, rapid traverse B: 18m/min, C-axis swivel: 360°. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2500mm, weight: approx. 6000kg, control: PC Fusion CNC 640T, operating hours: approx. 5000h. Without bar loader, Rotaryscale defective. Documentation available. On-site inspection is possible.
CNC-Surface-Grinding-Machine-Stöckel-FNX-850-Z-NC-T used
CNC Surface Grinding Machine
Stöckel FNX 850 Z NC-T
Germany
2020
used
on request
INNO27736
A CNC profile and surface grinding machine Stöckel is available. Travel X/Y/Z: 850mm/680mm/475mm, guide X/Y/Z: sliding guide/linear guide/linear guide, table dimensions X/Y: 800mm/500mm, table feed: 30m/min, drive X/Y/Z: Toothed belt/ball screw/ball screw, feed: Y/Z: 2000mm/min, fine adjustment X/Y/Z: from 0.001mm, speed: 4000rpm, spindle taper: 60mm, spindle power: 11kW, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm. Machine dimensions X/Y/Z: approx. 3500mm/2700mm/2300mm, weight: approx. 4300kg, operating hours: 16156h, control: NC-T. Documentation available. On-site inspection is possible.