▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [241 - 260 of 916]

CNC Circular Grinding Machine

Gp CNC 650

Germany

2012

used

on request

INNO28121

A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible.

Eccentric Press

Paul Müller/schuler/hensel ExP 25/PE 25-250/EBU 25F

Germany

1988

used

on request

INNO28120

Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible.

Section Shear

Peddinghaus 219 Super 13 G

Germany

1984

used

on request

INNO28115

Bending capacity: angle iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, T-iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, max. U- and I-steel: NP 18, drive power: 3kW. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/2100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Cold Circular Saw

Trennjaeger LPC 110/400

Germany

1979

used

on request

INNO28114

Saw blade diameter: 360mm, cutting speed: 16m-50m/min, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1500mm, weight: approx. 1000kg. Cutting range at 90°: round: 110mm, square: 110mm, rectangular: 110mm/400mm. Cutting range at 45°: round: 110mm, square: 110mm, rectangular: 110mm/280mm. Documentation available. On-site inspection is possible.

Cutting Optic

Trumpf F240 D40 R265

Germany

unknown

used

on request

INNO28111

Still in the original packaging, has been little used. On-site inspection is possible.

Hardening Oven

Nabertherm Multitherm N7

Germany

1996

used

on request

INNO28108

Volume: 7l, power: 3kW, max. temperature: 1100°C, internal dimensions X/Y/Z: 230mm/250mm/120mm, external dimensions X/Y/Z: approx. 460mm/690mm/460mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.

Corner Seam Welding Machine

Fröhlich/migatronic SAX700/Automig 273i

Germany

2018

used

on request

INNO28104

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

Start Hole EDM Machine

Agie Charmilles Drill 11

Germany

2008

used

on request

INNO28096

An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible.

CNC Vertical Machining Center

Dmg Mori CMX 600 V

Germany

2017

used

on request

INNO28095

Travel X/Y/Z: 600mm/560mm/510mm, accuracy X/Y/Z: 6µm, rapid traverse X/Y/Z: 30m/min, max. feed force: 5kN, max. feed: 30m/min, table dimensions X/Y: 900mm/560mm, max. table load: 600kg. Spindle speed: 12000rpm, drive power: 13kW, torque: 82Nm. Tool positions: 30, max. tool diameter free/occupied: 130mm/80mm, max. tool length: 300mm, max. tool weight: 8kg. Machine dimensions X/Y/Z: approx. 3050mm/3500mm/2950mm, weight: approx. 5000kg, operating hours: 59667h, spindle hours: 16074h. Including internal coolant supply. Documentation available. On-site inspection is possible.

CNC Universal Milling Machine

Deckel FP 5 CC

Germany

unknown

used

on request

INNO28092

Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1500mm/675mm, speed: 6300rpm, tool holder: SK40, feed: 5000mm/min, spindle power: 7.5kW, machine dimensions X/Y/Z: approx. 2400mm/2500mm/2500mm, weight: approx. 6000kg. On-site inspection is possible.

CNC Cycle Lathe

Romi M 420

Germany

unknown

used

on request

INNO28091

A Romi CNC cycle lathe is available. Center height: 215mm, center width: 1000mm, turning diameter over bed/face slide: 430mm/204mm, spindle bore: 53mm, rapid traverse X/Z: 7.5m/min / 10m/min, spindle speed: 4000rpm, main spindle motor power: 7.5kW, tool positions: 8, machine dimensions X/Y/Z: approx. 2800mm/1300mm/2000mm, weight: approx. 3000kg, control: GE Fanuc series 21i-TB. Documentation available. On-site inspection is possible.

CNC Milling Machine

Geiss FZ 2000x1000

Germany

2007

used

on request

INNO28088

A Geiss CNC 5-axis lathe is available. Connected load: 22.62kW, travel X/Y/Z: 2400mm/1400mm/760mm, B-axis: 210°, C-axis: 520°, rapid traverse X/Y/Z: 75m/min, 75m/min, 70m/min, rapid traverse B-/C-axis: 20880°/min. Speed: 40000rpm, tool holder: HSK-32 E, spindle power: 9kW, tool positions: 12, weight: approx. 35000kg, control: Siemens 840DI. Including center partition for two-station operation, Busch 110m³/h vacuum pump, Rittal SK 3320 cooling unit, measuring probe and knee switch for the vacuum. Documentation available. On-site inspection is possible.

CNC Waterjet Cutting Machine

Stako Trium WPC

Germany

2016

used

on request

INNO28087

Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible.

Remaining Stock

Klopp/müller/reinhardt FWU 13-6/MPS2/RAS 52.80

Germany

1970

used

on request

INNO28076

Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.

Deep Hole Drilling Machine

Heyligenstaedt

Germany

1951

used

on request

INNO28075

A Heyligenstaedt deep-hole drilling machine is available. Speed: 1120 rpm, turning diameter: 282 mm. The wedge bar chuck is of high quality and relatively new. An on-site inspection is possible.

Mesh Welding System

Gad RE40/R33/R31

Germany

2009

used

on request

INNO28062

A complete GAD lattice girder welding system with Wafios wire straightening and cutting machines is available. 1) GAD mesh welding machine, year of manufacture: 2009, mesh width: 270mm-3000mm, mesh length: 600mm-3500mm, line wire diameter: 2.5mm-8mm, line wire pitch single rod/double rod: 25mm/50mm, cross wire diameter: 2.5mm-8mm, cross wire pitch: 15mm, transformers: 3x, machine dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. 2) Wire straightening and cutting machine Wafios RE 40, year of construction: 2021, wire diameter: 3mm-10mm, cutting capacity: 120 rods/min, cutting capacity with fixed stop and continuous cut: 220 rods/min. 3) Wafios R33 wire straightening and cutting machine, year of manufacture: 2011, wire diameter: 1.5mm-7mm, cutting capacity: 160-320 cuts/min. 4) Wafios R31, year of manufacture: 1997, wire diameter: 1.5mm-7mm, cutting capacity: 160-270 cuts/min. System production capacity: approx. 1250kg/h, total system dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. All wire straightening and cutting machines including reel. Documentation available. On-site inspection is possible.

CNC Lathe

Boehringer VDF 250C

Germany

1992

used

on request

INNO28061

Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025.

Coping Robot

Kaltenbach KC 1200

Germany

2010

used

on request

INNO28050

With notching robot Kuka + transport system T13 / M150, equipped with oxy-fuel torch for steel profiles, sheets, rectangular tubes. Number of axes notching system: 8, transport system infeed length set up: approx. 13.5m (1 long version still available), transport system outfeed length set up: approx. 10.0m (4 standard trestles still available), electronics for cross conveyor infeed and outfeed: completely included in the control cabinet (without cross conveyor), safety fencing: only partially set up (complete fencing available), safety light barriers: not set up (completely available). With documentation, an on-site inspection is possible.

CNC Turning- and Milling Center

Gildemeister Twin 65

Germany

2004

used

on request

INNO28048

A Gildemeister CNC double-spindle turning and milling center is available. Center height: 1288mm, center width: 900mm, max. turning length: 300mm, max. turning diameter over bed/face slide/crank: 250mm. Spindle diameter: 120mm, spindle bore: 79mm, max. quill stroke: 300mm, quill taper: MK4. Machine dimensions X/Y/Z: approx. 6200mm/4700mm/2500mm, weight: approx. 10000kg, control: Siemens Sinumerik 840D, operating hours: 72590h. Including cooling lubricant system and bar loader Breuning ILS RBK. Without cutting tools. Documentation available. On-site inspection is possible.

CNC Double Spindle Lathe

Takisawa TT-500 GD

Germany

2018

used

on request

INNO28044

A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible.