Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Metal processing machines
Balancing machines 1 Broaching and slotting and drawing machines 4 Deburring machines 3 Diecasting 4 Drilling 37 Eroding machines 21 Facing and centering machines 1 Forging attachments 1 Grinding machines 67 Honing machines 3 Lapping machines 1 Lathes 107 Machining centers 79 Measuring machines 3 Milling machines 98 Other machinery 14 Pipe and tube working machines 10 Polishing machines 1 Presses 103 Profile processing machines 4 Roller leveller 2 Saws 41 Sheet metal working 78 Stoves 33 Surface technology 40 Threading machines 2 Tools and accessories 8 Transfer machines 3 Welding and cutting 83 Window production machines 4 Wire industry machinery 21
Innovac used-machines Metal processing machines [41 - 60 of 877]
Corner-Crimping-Press-Elumatec-EP124 used
Corner Crimping Press
Elumatec EP124
Germany
1999
used
on request
INNO28023
Pressing force: 70kN, press height: 140mm, drive: pneumatic, compressed air: 7bar, air consumption: approx. 35l/cycle, machine dimensions X/Y/Z: approx. 1100mm/1000mm/1250mm, weight: approx. 550kg. Documentation available. On-site inspection is possible.
more
Eccentric-Press-Bihler-GRM-50 used
Eccentric Press
Bihler GRM 50
Germany
unknown
used
on request
INNO28020
Stroke rate: 250/min, press force: 250kN, stroke: 16mm. Including press with 2 slides, reel, welding device with cooling unit and automatic nut feeder. Documentation available. On-site inspection is possible.
more
CNC-Laser-Cutting-Machine-Trumpf-TLC-1050 used
CNC Laser Cutting Machine
Trumpf TLC 1050
Germany
2000
used
on request
INNO28019
Laser power: 4kW (4000W), travel X/Y/Z: 4000mm/1500mm/500mm, C-axis: 360°, table dimensions X/Y: 3000mm/1500mm, connected load: 90kVA, machine dimensions X/Y/Z: approx. 9000mm/5000mm/3000mm, weight: approx. 10000kg, laser hours: 34879h. The resonator is defective. Documentation available. On-site inspection is possible.
more
CNC-Cycle-Lathe-Monforts-KNC-8 used
CNC Cycle Lathe
Monforts KNC 8
Germany
2005
used
on request
INNO28018
Turning diameter over bed/face slide: 800mm/520mm, turning length: 2000mm, power: 30kW, speed: 1600rpm, control: R&D. Including faceplate with a diameter of 800mm, 3-jaw chuck, 2x steady rests, chip conveyor and extensive accessories (steel holder, turning chisel, etc.). Documentation available. On-site inspection is possible.
more
CNC-Cycle-Lathe-Monforts-KNC-5 used
CNC Cycle Lathe
Monforts KNC 5
Germany
2000
used
on request
INNO28017
Turning diameter over bed/face slide: 500mm/290mm, turning length: 1580mm, speed: 2800rpm, power consumption: 16kVA, spindle torque: 1530Nm, rapid traverse X/Z: 5m/10m/min, tailstock quill stroke: 210mm, bed width: 360mm. Machine dimensions X/Y/Z: approx. 3500mm/1700mm/2000mm, weight: approx. 3300kg, control: R&D. Including chip conveyor, steady rests, coolant pump, quick-change holder and extensive accessories (jaws, faceplate, steels, etc.). Documentation available. On-site inspection is possible.
more
CNC-Lathe-Monforts-RNC-400 used
CNC Lathe
Monforts RNC 400
Germany
2006
used
on request
INNO28016
Turning diameter over bed/face slide: 420mm/280mm, turning length: 600mm, speed: 2900rpm, control: Fanuc 21i-TB. Including driven tools, chip conveyor and extensive accessories (steel holders, steels, inserts, top jaws, etc.). Documentation available. Inspection on site is possible.
more
CNC-Lathe-Weisser-Gigant used
CNC Lathe
Weisser Gigant
Germany
1988
used
on request
INNO28015
Turning diameter over bed/face slide: 1400mm/1080mm, turning length: 1400mm, power: 45kW, speed: 1120rpm, control: Heidenhain 620. The CNC axis of the machine was renewed in 2013. Including steel holder and steels. Documentation available. On-site inspection is possible.
more
CNC-Bed-Milling-Machine-Lagun-BM4 used
CNC Bed Milling Machine
Lagun BM4
Germany
2018
used
on request
INNO28014
A CNC bed-type milling machine Lagun that has not been used much is available. Travel X/Y/Z: 4000mm/1300mm/2000mm, B-axis: 360°/2.5°, tool positions: 24, table dimensions X/Y: 4100mm/1100mm, max. workpiece weight: 12000kg, spindle mount: ISO50, speed: 4000rpm, machine weight: approx. 26000kg, operating hours: 9006h, spindle hours: approx. 3235h, control: Heidenhain iTNC 640. Including 2x chip conveyors, 2x chip containers and a comprehensive package of tools and fixtures. Documentation available. On-site inspection is possible.
more
Lathe-Boehringer-VDF-DE-420 used
Lathe
Boehringer VDF DE 420
Germany
1979
used
on request
INNO28013
Turning diameter over bed/face slide: 480mm/210mm, turning length: 700mm, spindle speed: 1800rpm, spindle power: 7.5kW. Including digital display for 3 axes, coolant device, steel holders, steels and cutting plates. Documentation available. On-site inspection is possible.
more
CNC-Fine-Blanking-Press-Smg-kohler-HFA-4000-VRM65 used
CNC Fine Blanking Press
Smg/kohler HFA 4000/VRM65
Germany
1988
used
on request
INNO28012
A punching line with coil reel, straightening station and press is available. 1) Fine blanking press SMG HFA 4000, year of manufacture: 1988, press force: 4000kN, ring punch force: 320kN-3200kN, counterholder force: 130kN-1300kN, ram stroke: 30mm-150mm, tool clamping area X/Y top/bottom: 900mm x 900mm / 910mm x 1350mm, max. tool height: 410mm, number of strokes: 40/min, weight: approx. 31000kg, control: Siemens S5. 2) Coil reel Kohler. 3) Kohler VRM.65.260/21-H3500 straightening station, year of manufacture: 1991, including loading trolley, units, feed roller, Raziol Ebade oiling unit, running platform, switch cabinets and oil mist extraction system. Documentation available. On-site inspection is possible.
more
Eccentric-Fineblanking-Press-Schaal-SEP25 used
Eccentric Fineblanking Press
Schaal SEP25
Germany
1981
used
on request
INNO28011
A punching line with reel, strip straightening station and fineblanking punch is available. 1) Eccentric fineblanking die-cutter Schaal SEP25, year of manufacture: 1981, pressing force: 25t, stroke: 8mm-60mm, upright width: 460mm, lateral upright clearance: 145mm, installation height: 270mm, table dimensions X/Y: 450mm/480mm, table height: 960mm, ram surface X/Y: 280mm/250mm. Including feed roller. 2) Coil decoiler GSW LHM300/1000, year of construction: 1998, load capacity: 300kg. 3) Coil reel, load capacity: 300kg. 4) Coil straightening station Dreher 1633/BV, year of manufacture: 1982, documentation available. On-site inspection is possible.
more
Double-Column-High-Speed-Press-Schuler-A2-80 used
Double-Column High-Speed Press
Schuler A2-80
Germany
unknown
used
on request
INNO28010
Pressing force: 80t, ram stroke: 25mm, stroke: 100mm-500mm. Including strap infeed unit and Beutler collabroll/straightening station. Documentation available. On-site inspection is possible. The machine has an eccentric design.
more
CNC-Tool-Grinding-Machine-Smp-Numaffut-CA6 used
CNC Tool Grinding Machine
Smp Numaffut CA6
Germany
2001
used
on request
INNO28009
A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.
more
CNC-Machining-Center-Hurco-VMX-50 used
CNC Machining Center
Hurco VMX 50
Germany
2006
used
on request
INNO28004
Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.
more
Upright-Drilling-Machine-Webo-GRADUA-60 used
Upright Drilling Machine
Webo GRADUA 60
Germany
1973
used
on request
INNO28002
Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.
more
CNC-Machining-Center-Stama-MC-726-MT used
CNC Machining Center
Stama MC 726 MT
Germany
2006
used
on request
INNO27999
A CNC 5-axis vertical machining center Stama is available. Travel X/Y/Z: 800mm/400mm/350mm, speed: 12,000 rpm, spindle power: 30kW, spindle holder: HSK-63, tool positions: 42, max. workpiece weight: 180kg. Machine dimensions X/Y/Z: approx. 3900mm/3500mm/3300mm, weight: approx. 6600kg, control: Siemens 840D, operating hours: 33,813h. Including measuring probe, bar loader, cooling and filter system. Documentation available. On-site inspection is possible.
more
Continuous-Cleaning-Machine-Franke-DRB-300-100-5000-III-RST used
Continuous Cleaning Machine
Franke DRB-300/100/5000 III-RST
Germany
2006
used
on request
INNO27997
A continuous spray cleaning system F/R/A/N/K/E is available. Cleaning tank volume: 800l, rinsing tank volume: 400l, recommended temperature cleaning/rinsing: 60°C/65°C, heating capacity cleaning/rinsing/drying: 27kW/12kW/9kW, max. temperature cleaning/rinsing/drying: 80°C/80°C/120°C, filter fineness cleaning/rinsing: 1mm/1mm, connected load: 56kW. Including an oil separator plate phase separator (PPT). Documentation available. On-site inspection is possible.
more
CNC-Precision-Lathe-Weiler-DA-260-X-1000 used
CNC Precision Lathe
Weiler DA 260 X 1000
Germany
2016
used
on request
INNO27987
Center height: 260mm, center width: 1000mm, swing diameter over bed/face slide: 535mm/345mm, speed: 1500rpm. Spindle bore: 71mm, spindle diameter: 100mm, tool holder: 25mm/25mm, drive power: 7.5kW. Number of feeds: 66, longitudinal feed: 4mm/revolution, face feed: 2mm/revolution. Including Fagor numerical position indicator, 200mm Röhm lathe chuck with base and top jaws, 3x soft top jaws, 2x BD 25120 lathe tool holder, BH 32130 lathe tool holder, Röhm center punch MK5 and a set of mounting plates. Documentation available. On-site inspection is possible.
more
Single-Column-Eccentric-Press-Ambold-PEEV-40.1 used
Single-Column Eccentric Press
Ambold PEEV 40.1
Germany
1979
used
on request
INNO27983
Pressing force: 400kN, installation height: 400mm, stroke: 44mm, max. stroke rate: 130/min, connected load: 3kW, weight: 2.7t. On-site inspection is possible.
more
Single-Column-Eccentric-Press-Ambold-EVSP-55 used
Single-Column Eccentric Press
Ambold EVSP 55
Germany
1986
used
on request
INNO27982
Pressing: 550kN, installation height: 380mm, stroke: 45mm, max. stroke rate: 120/min, connected load: 4.8kW, weight: 3.5t. On-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 1
Automation-technology 56
Beverage-filling-technology 27
Complete-production-lines 3
Construction-machinery 21
Energy-management 147
Food-processing-and-beverage 134
Material-storage 65
Materials-handling-technology 56
Measurement-and-testing 57
Medical-equipment 7
Metal-processing-machines 877
Office-equipment 1
Other-machines 75
Packaging-machines 193
Pharmaceutical-and-cosmetics 24
Plastics-processing-machines 195
Printing-machines 67
Process-equipment-and-chemistry 110
Packaging-material-machinery 72
Robotics 43
Surplus-goods 4
Textile-machinery 96
Utility-vehicles 9
Woodworking-machines 95