Induction Melting Furnace

Inductotherm

Germany

unknown

used

on request

INNO26048

The machine was overhauled by the manufacturer in 2022, the coating inside the coil was renewed, the oven was then no longer used, the oven no longer complies with the EMC guidelines, without control, an on-site inspection is possible.

more

Console Milling Machine

Veb Fritz Heckert FU 250x1000

Germany

1980

used

on request

INNO26043

X-travel: 900mm, y-travel: 300mm, z-travel: 380mm, rotational speed: 28-2800/min, feed rate: 10-630mm/min, connected load: 5.8kW, weight: 1.7t, with dividing head, counter spindle, holders, spare parts, various tools, an inspection is possible.

more

Vertical Lathe

Hessapp DVH 450 e

Germany

2005

used

on request

INNO26033

Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024.

more

Hydraulic Aggregate

Nölle + Nordhorn

Germany

2014

used

on request

INNO26018

Max. hydraulic pressure: 200bar, hydraulic oil capacity: 400l, length: 2000mm, width: 1500mm, height: 1000mm, with operating instructions, wiring diagram and installation instructions, on-site inspection is possible.

more

CNC Multi-Spindle Lathe

Index-werke MS 52C

Germany

2004

used

on request

INNO26008

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.

more

CNC Multi-Spindle Lathe

Index-werke MS 52G

Germany

2004

used

on request

INNO26007

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.

more

CNC Multi-Spindle Lathe

Index-werke MS 52G

Germany

2004

used

on request

INNO26005

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.

more

CNC Multi-Spindle Lathe

Index-werke MS 52G

Germany

2004

used

on request

INNO26004

The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.

more

Cylindrical Grinding Machine

Karstens ASE A 650

Germany

unknown

used

on request

INNO25999

Grinding length: 650mm, center height: 150mm, grinding wheel dimensions: 400x80x127mm, sleeve diameter with Mk 4 seat: 50mm, weight: 2.9t, including belt filter, electrical circuit diagrams and hydraulic diagrams, an on-site inspection is possible.

more

Rotary Transfer Machine

Imoberdorf imo-smart

Germany

2015

used

on request

INNO25992

Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader.

more

CNC Lathe

Padovani Labor E255x1500

Germany

1996

used

on request

INNO25990

Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible.

more

Polishing Maschine

Etnst Thielenhaus KM 150 S1A

Germany

1979

used

on request

INNO25989

There are two identical polishing machines available, with accessories and documentation.

more

Vertical EDM Machine

Ona DATIC D 360

Germany

1992

used

on request

INNO25985

Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine.

more

Laser Cutting Machine

Amada LC 2415 A IV

Germany

2008

used

on request

INNO25954

X-travel: 2520mm, y-travel: 1550mm, z-travel: 300mm, max. sheet thickness: 12mm, max. workpiece weight: 330kg, cutting speed: 0-20m/min, controls: AMNC-F, connected load: 70kVA, weight: 7.5t, operating hours: 23,600h, with Resonator Fanuc AF 2000 E (LU 2.5), laser power: 2500W, laser wavelength: 10.6μm, with adaptive optics (Active Cut), sensor cutting head HS-2003, high-pressure cutting device (Clean Cut), aluminium cutting device (Alu Cut), focus point adjustment, gas pressure adjustment, resetting device, parts flap, extraction system, cooling unit, beam path rinsing and diode laser for positioning.

more

Hydraulic Double-Column Press

Müller Weingarten HQR 315.25

Germany

1994

used

on request

INNO25914

Nominal force: 3150kN, table dimensions: 2500x1600mm, stroke speed: 20-80/min, ram stroke: 280mm, ram adjustment: 90mm, weight: 68t, with Transfer and Sheet Metal System Dreher.

more

Cold Circular Saw

Hans Kaltenbach KKS 400

Germany

unknown

used

on request

INNO25910

Saw blade diameter: 400mm, length: 1080mm, width: 900mm, height: 1760mm, weight: 925kg.

more

Travelling-Column Machining Center

Kekeisen VFB 2000

Germany

2005

used

on request

INNO25906

X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024.

more

Submerged Arc Tandem AC/AD Seam Welding Machine

Oerlikon Schweißportal 8,5x6

Germany

2012

used

on request

INNO25896

The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition.

more