▷ Używane maszyny do produkcji opakowań z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Maszyny do produkcji opakowań

Inne maszyny 17 Klejarki do pudełek składanych 2 Kopertownice 11 Laminowanie linii 4 Maszyny do cięcia 15 Maszyny do produkcji torebek 5 Maszyny etykietujące 3 Maszyny nawijające 6 Maszyny perforowane 1 Płyta wykrawająca 2 Prasy 1 Produkcja i przetwarzanie tektury falistej 7 Produkcja tektury falistej 2 Wykrawanie 7

Innovac maszyny-uzywane

Maszyny do produkcji opakowań [1 - 20 of 83]

Maszyna do druku kopert

Winkler + Dünnebier Helios 135

Niemcy

1967

używany

na żądanie

INNO28521

A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible.

Maszyna workowa

Honsel & Co. 722

Niemcy

nieznany

używany

na żądanie

INNO28479

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible.

Maszyna workowa

Honsel & Co. 722

Niemcy

nieznany

używany

na żądanie

INNO28478

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible.

Maszyna do płaskich worków

Honsel & Co./pcm Krause P44

Niemcy

2003

używany

na żądanie

INNO28477

A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible.

Maszyna workowa

Seydel

Niemcy

1994

używany

na żądanie

INNO28476

A bag making machine (packaging machine for industrial bags) Seydel is available. Working width: 1020mm, wrapping closure: one-sided/both-sided. Including cardboard flange feeder and deposit table with counter and advance. On-site inspection is possible.

Klejarka do pudełek składanych

Jagenberg Diana 115-3

Niemcy

1992

używany

na żądanie

INNO28465

Corrugation types: F to E corrugations, B-corrugation: low mileage. 4.1 Normal folding carton: cardboard and flute caliber: 0.25mm-3mm, grammage: 200g-990g/m², indent: 40mm/900mm, max. glue flap up to 4th crease: 990mm. Folding bottom folding box: caliber: 0.25mm-3mm, grammage: 250g-900g/m², indent: 55mm/900mm, width min./max.: 190mm/1080mm, glue flap: 10mm-40mm, max. glue flap up to 4th creasing: 990mm. Documentation available. On-site inspection is possible.

Maszyna do sztancowania kartonu

Wupa 6.3

Niemcy

nieznany

używany

na żądanie

INNO28464

Corrugation types: F/W/E/B/C, double corrugation types: FF/FE/FB/EB, gray board weight: 600g-1200g/m², board thickness range: 0.15mm-6mm, grammage capacity: 180g-1200g/m², min. sheet size: 590mm/700mm, max. sheet size: 1015mm/1410mm, blade size X/Y: 995mm/1390mm, sheet start to 1st blade: 15mm. Documentation available. On-site inspection is possible.

Laminator

Klett Lamin0/165-165 ZERO

Niemcy

2008

używany

na żądanie

INNO28463

A Klett laminating machine specially designed for precise 0-register lamination with a tolerance limit of +/-0.5mm and automatic format changeover is available. The machine was overhauled in 2013. Minimum format: 500mm/500mm, maximum format: 1650mm/1650mm, maximum laminating capacity: 3500 sheets/h, paper and solid board weight: 120g-700g/m², corrugated and solid board thickness range: 0.75mm-8mm, control: Siemens S7. System components: Feeder for sheet material, feeder for carrier material, laminating unit (Klett 165-165 ZERO), press station, bundle station, bundle turning station (flip-flop), non-stop feeder and caliber adjustment. Documentation available. On-site inspection is possible.

Maszyna do cięcia

Adolf Mohr Polar 78 E

Niemcy

1995

używany

na żądanie

INNO28461

Cutting width: 780mm, insertion height: 120mm, insertion depth: 780mm, table height: 900mm, pressing force: 3000daN, drive power: 3.5kW, machine dimensions X/Y/Z: approx. 1600mm/2050mm/1600mm, weight: approx. 1350kg. On-site inspection is possible.

Laminator

Afs AVE-250E

Niemcy

2019

używany

na żądanie

INNO28440

An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible.

Bobiniarka i przewijarka rolek

Sml W2000

Niemcy

2016

używany

na żądanie

INNO28439

A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible.

Maszyna do druku kopert

Winkler + Dünnebier 120 servo Tecnomatic

Niemcy

1994

używany

na żądanie

INNO28257

Output: 1000 envelopes/min, min./max. envelope size: 90mm x 120mm/176mm x 254mm, roll unwind: Contiweb, web alignment system: 1x BST, print units: 2 complete/3 incomplete, ink tanks: 4x Inkcan, ink pump: 4x pneumatic, window unit: traditional punching knives and adhesive paper. Including time lubrication unit, infrared drying, electronic counter and monitoring. Documentation available. On-site inspection is possible.

Maszyna do druku kopert

Winkler + Dünnebier 102

Niemcy

2001

używany

na żądanie

INNO28256

Output: 1000 envelopes/min, min/max envelope size: 90mm x 120mm/176mm x 254mm, roll unwind: Contiweb, web alignment system: 1x BST, print units: 2 complete/3 incomplete, ink tanks: 4x Inkcan, ink pump: 4x pneumatic, window unit: traditional punching knives and adhesive paper. Including top and bottom scriber, time lubrication unit, latex and dextrin capping, infrared drying, electronic counter and monitoring.

Linia do produkcji tektury falistej

Göpfert SRE Maxi/FPU

Niemcy

2016

używany

na żądanie

INNO28243

A Göpfert system for creasing, cutting, slitting, die-cutting and flexographic printing of corrugated board is available. Slot depth: 2x1000mm, material thickness range: 2.5mm-15mm, power: 25kW, pairs of working shafts for creasing and cutting: 2, pairs of container creasers: 4, pre-squeezer width: 50mm, pairs of pre-squeezer blades: 4, pairs of plate blades: 4. Including automatic feeder ECO without lifting table. Flexo printing unit FPU: Sheet dimensions X/Y: 2500mm/6000mm, min. sheet length: 1000mm, max. printing width: 2500mm, printing cylinder circumference: 2500mm, number of plates: 4, plate thickness: 6.5mm, material thickness range: 1.5mm-15mm, pairs of infeed shafts: 1, pairs of outfeed rollers: 1, number of transport units: 4. Total system weight: approx. 10000kg, printing unit discharge length: 3000mm, intermediate transport length: 5200mm, control: remote control via network, operating hours: 13000h. Without lifting table on automatic feeder ECO. Documentation available. On-site inspection is possible.

Ploter tnący

Aristo Aristomat 2032 GL

Niemcy

2003

używany

na żądanie

INNO28181

An Aristo plotter equipped for solid and corrugated board with Multihead OT.T.M.P. II-2 is available. Working width: 2000mm, working length: 3200mm, static repeat accuracy: +/-0.08mm, max. speed: 2.3m/s, max. acceleration: 2G, max. material passage height: 55mm, vacuum pump power: 5.5kW. Machine dimensions X/Y/Z: approx. 2700mm/4250mm/1100mm. Documentation available. On-site inspection is possible.

Maszyna inline

Dy Machinery FPS-120Gold Inliner

Niemcy

2009

używany

na żądanie

INNO28176

A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025.

Wykrawarka portalowa ruchoma

Schön & Cie 2071A

Niemcy

nieznany

używany

na żądanie

INNO27959

An overhauled punching machine Schön is available for the precise punching of sheets or roll material. Punching force: 250kN, max. punching area X/Y: 2100mm/650mm, cutting head dimensions X/Y: 650mm/650mm, pressure plate rotation speed: 200°/s, clamping beam travel: 800mm, repeat accuracy: +/-1°, punching speed: 200mm/s, hydraulic drive: 11kW, oil volume: 200l. The clamping beams are driven by a digital servo motor with ball screw spindle. The machine has been overhauled and has a Beckhoff industrial PC with Windows 10 and TwinSafe safety logic. Documentation available. An on-site inspection is possible.

Wykrawarka obrotowy

Rdc Texo Mod. 165/200 FB

Niemcy

1995

używany

na żądanie

INNO27894

With ceramic anilox rollers, 2x 100l/cm 13g, 1x 80l/cm 15g, all with chamber doctor blade and vacuum transport, one 13g roller additionally with rubber roller, infeed: lead edge, compressed air connection: 8bar, output: 9000 sheets/h, control: Siemens S7, connected load: 120kW, length: 24,750mm, width: 4200mm, height: 3740mm, including prefeeder RODA FPKS 2200-064, working width: 2000mm, year of manufacture: 2000. With documentation, anilox roller, rubber roller and a comprehensive spare parts package. On-site inspection is possible.

Maszyna do druku kopert

Winkler + Dünnebier 527 GS

Niemcy

1993

używany

na żądanie

INNO27866

Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible.

Laserowy system punktacji

Mlt L 400

Niemcy

nieznany

używany

na żądanie

INNO27794

Path width: 1600mm, processing position: 50mm-1500mm, processing heads: 10x longitudinal scribes, longitudinal scribe line width: 50µm-100µm, laser power per head: under 40W. Laser head L400: wavelength: 10.6µm, output power: 400W, power stability: +/-2%. Machine dimensions X/Y/Z: approx. 3000mm/4500mm/4000mm, weight: approx. 5000kg. Including cooling unit PC 080 and supply cabinet. Retrofitting with 4x cross scoring is possible. Documentation available. On-site inspection is possible.