Innovac GmbH Used machines from Germany
Innovac maszyny-uzywane Technologia automatyzacji [1 - 20 of 56]
Maszyna-do-wciskania-Tyco-P300 używany
Maszyna do wciskania
Tyco P300
Niemcy
2001
używany
na żądanie
INNO28060
A Tyco (TE Connectivity) press-fit machine (insertion machine) is available. Insertion dimensions X/Y: 300mm/310mm, max. speed: 150mm/s, max. number of insertions: 15 million/year, insertion capacity: 4000-5000 pins/h. Machine dimensions X/Y/Z: approx. 2400mm/1600mm/1450mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.
Maszyna-do-układania-Mechatronika-M10V używany
Maszyna do układania
Mechatronika M10V
Niemcy
2013
używany
na żądanie
INNO28008
A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible.
Linia-do-powlekania-Dage-Prima-V7 używany
Linia do powlekania
Dage Prima V7
Niemcy
2013
używany
na żądanie
INNO27750
Basket dimensions X/Y/Z: 300mm/250mm/200mm, bath capacity: 52l/80kg, European card throughput: approx. 280/h, machine dimensions X/Y/Z: approx. 1000mm/750mm/1050mm. Including automatic drain, fill level monitoring, cooling zone, collection container for water/solvent: 0.5l/5l. Inspection of the cooling system is necessary. Documentation available. On-site inspection is possible. Expected to be available from mid-October 2024.
Maszyna-do-układania-Neoden-S1 używany
Maszyna do układania
Neoden S1
Niemcy
2019
używany
na żądanie
INNO27708
Heads: 4, Feeder slots: 58, Positioning accuracy: +/-0.01mm, Production output: 6000CPH, Camera field of view X/Y at 20µm resolution: 48mm/40mm, Machine dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection is possible.
Maszyna-do-lutowania-na-fali-Seho-System-8040-PCS używany
Maszyna do lutowania na fali
Seho System 8040 PCS
Niemcy
nieznany
używany
na żądanie
INNO27642
Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available.
Piekarnik-Reflow-Smt-1.7-TC-N2 używany
Piekarnik Reflow
Smt 1.7 TC N2
Niemcy
2005
używany
na żądanie
INNO27641
Text: Heating zones: 7, transport width: 400mm, transport speed: 1500mm/min, nitrogen consumption at 250°C: approx. 15m³/h, nitrogen purity: 99.999%, cooling zones: 2, machine dimensions X/Y/Z: approx. 3300mm/1400mm/1500mm, weight: approx. 2000kg.
Drukarka-sitowa-i-szablonowa-Ekra-X3 używany
Drukarka sitowa i szablonowa
Ekra X3
Niemcy
2010
używany
na żądanie
INNO27636
Print format X/Y min./max.: 80mm x 50mm/460mm x 460mm, print material thickness: 1mm-6mm, Lp under clearance: 23mm, screen/stencil dimensions X/Y min./max. : 300mm x 300mm/740mm x 740mm, table adjustment X/Y: +/-4mm, repeatability at 6 sigma: +/-15µm, squeegee speed: 10mm-200mm/s, squeegee pressure: 10N-250N, cycle time plus pressure: 12s, camera type: DC8/15µm per pixel, camera viewing window: 12mm/9mm, separation distance: 0mm-3mm, separation speed: 0.3mm-10mm/s, transport height: 830mm-950mm. Machine dimensions X/Y/Z: approx. 1100mm/1490mm/1400mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.
Automatyczny-system-pomiarowy-Pcam-comau-CMM-655-CNC używany
Automatyczny system pomiarowy
Pcam/comau CMM 655 CNC
Niemcy
2013
używany
na żądanie
INNO27484
An automatic handling and measuring system for the milling and eroding process is available. Robot: Load capacity: 150kg (pallet + workpiece), number of axes: 6, intended use: Loading and unloading of workpieces and tools in the warehouse. Measuring machine: PCam CMM 655 CNC. The system is configurable. Documentation available.
System-sterowania-Siemens-baumüller-Sinumerik-840D-GHT-S42 używany
System sterowania
Siemens/baumüller Sinumerik 840D/GHT S42
Niemcy
nieznany
używany
na żądanie
INNO27429
Various machine parts are available. 1) Siemens Sinumerik 840D PCI/ISA-BOX, Siemens Sinumerik 840D, MMC103, Sinumerik 840D CNC full keyboard XT/AT. 2) 2x load contactor Siemens 3RT1054-6AP36. 3) Tachometer Baumüller GHT S42.
Przetwornik-częstotliwości-Vectron-elektronik-VC-400-060 używany
Przetwornik częstotliwości
Vectron-elektronik VC 400-060
Niemcy
nieznany
używany
na żądanie
INNO27407
Input voltage (+/-15%): 3 x 400V, output voltage (+/-15%): 3 x 0V-400V, input frequency: 50Hz-60Hz, power: 0kW-200kW, output frequency: 0Hz-200Hz, rated current: 72A. Overload capacity: 1.2: 60A, 42kVA, 30kW, 1.5: 45A, 31kVA, 22kW. Voltage: 265V, frequency: 195Hz, initial voltage: 13.6V, initial frequency: 0Hz. Dimensions X/Y/Z: approx. 2100mm/800mm/500mm. Documentation available. On-site inspection is possible.
Automatyczna-maszyna-do-kontroli-optycznej-Göpel-Opticon-BasicLine-NP używany
Automatyczna maszyna do kontroli optycznej
Göpel Opticon BasicLine NP
Niemcy
2009
używany
na żądanie
INNO27266
Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available.
Podajnik-płyt-SMT-Feeder-Rüttelfeeder-8mm-44mm używany
Podajnik płyt SMT
Feeder Rüttelfeeder/8mm-44mm
Niemcy
nieznany
używany
na żądanie
INNO27262
Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages.
Maszyna-do-układania-Zevatech-juki-dek-FS730-FM740-TR4NEZ-265 używany
Maszyna do układania
Zevatech/juki/dek FS730/FM740/TR4NEZ/265
Niemcy
1995
używany
na żądanie
INNO27261
A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available.
Drukarka-szablonowa-Ekra-E1 używany
Drukarka szablonowa
Ekra E1
Niemcy
2000
używany
na żądanie
INNO27087
Print area X/Y: 430mm/570mm, frame thickness: 30mm, print speed: 110mm/s, separation rate: 0.4-1mm/s, alignment X/Y: +/-8mm, alignment theta: +/-2°. Dimensions X/Y/Z: approx. 1300mm/1100mm/1400mm, weight: approx. 350kg. Suitable for Alpha Tetra stenter frames.
Maszyna-do-układania-Panasonic-RH-3 używany
Maszyna do układania
Panasonic RH 3
Niemcy
nieznany
używany
na żądanie
INNO27012
Production speed: 25000/h, placement accuracy: 0.065mm, component dimensions: 2.5mm and 5mm. Loading and unloading of PCBs must be done manually due to a defect. 380V transformer included.
Jednostka-ładująca-rozładowująca-magazynek-Panasonic-MBS-M-MBSF-M używany
Jednostka ładująca/rozładowująca magazynek
Panasonic MBS M/MBSF M
Niemcy
2002
używany
na żądanie
INNO27011
A magazine loading unit and a magazine unloading unit for the Panasonic Panasert MB series are available. Including a 230V transformer.
Maszyna-do-lutowania-na-fali-Seho-2340-LRT używany
Maszyna do lutowania na fali
Seho 2340-LRT
Niemcy
2005
używany
na żądanie
INNO27015
The system has been switched off since 2014. Until then, all maintenance was carried out. Soldering width: 400mm, preheating zones: 6, convection heating length: 2000mm, soldering wave width: 450mm, max. soldering wave height with F-nozzle: 8mm. Total length: approx. 30m, infeed conveyor with stacker for return transport: approx. 14m, fluxer and soldering module: approx. 11m, outfeed conveyor with stacker for return transport: approx. 7m. Documentation available. Including 350kg solder, 3 loading tables, 40 outer frames and some spare parts. On-site inspection is possible.
Maszyna-do-lutowania-na-fali-Vitronics-Soltec-Delta-Wave-6622CC używany
Maszyna do lutowania na fali
Vitronics Soltec Delta Wave 6622CC
Niemcy
2006
używany
na żądanie
INNO27013
Chip shaft and main shaft can be switched separately. Alloy: SN100C, heating zones: 3 (including 1 convection), primary shaft: lambda shaft, dimensions X/Y/Z: approx. 3810mm/1400mm/2000mm, weight: approx. 2500kg. Defects: automatic height adjustment of the crucible, traces of corrosion on the crucible, manual activation of convection. Available from October 2024.
Bonder-do-grubego-drutu-Hesse-Bondjet-939 używany
Bonder do grubego drutu
Hesse Bondjet 939
Niemcy
2012
używany
na żądanie
INNO26845
There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg.
Silnik-serwo-Indramat-controltechniques-MAX1012D-MDD0 używany
Silnik serwo
Indramat/controltechniques MAX1012D/MDD0
Niemcy
nieznany
używany
na żądanie
INNO26749
There are 6 baskets full of servomotors available. More detailed list available in the pictures. All servomotors work perfectly. Documentation available. On-site inspection is possible.