▷ Używane maszyny budowlane z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Maszyny budowlane

Gąsienice 2 Inne maszyny 2 Koparka 3 Ładowarki 1 Produkcja materiałów budowlanych 2 Przyczepy 1 Technologia betonu i przygotowanie zaprawy 6 transport, platformy robocze 5 Urządzenia wiertnicze 3

Innovac maszyny-uzywane

Maszyny budowlane [1 - 20 of 25]

Betoniarka

Pemat PMPR 750

Niemcy

2000

używany

na żądanie

INNO28366

A Pemat pan mixer for concrete is available. Volume: 750l, max. filling weight: 1200kg, hardened concrete output per batch: 500l, grain size range: 0-65mm, mixing trough diameter: 1900mm, mixing trough height: 700mm, drive power: 30kW, weight: approx. 3000kg. On-site inspection is possible.

Kontener sanitarny

Containex 20ft S

Niemcy

1994

używany

na żądanie

INNO28354

A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible.

Podnośnik nożycowy

Niemcy

2002

używany

na żądanie

INNO28345

A scissor lift from an unknown manufacturer is available. Lifting height: 8140mm, working height: 10000mm, machine dimensions X/Y/Z: approx. 2350mm/1200mm/2300mm, weight: approx. 2250kg. The battery of the machine must be deep-charged. Documentation available. On-site inspection is possible.

Skraper radialny

Elba RSA 50 D

Niemcy

1998

używany

na żądanie

INNO28342

Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible.

Koparka gąsienicowa

Zeppelin 325 LN

Niemcy

1993

używany

na żądanie

INNO28059

Power: 126kW, backhoe bucket capacity: 1.7m³, reach: 9760mm, track width: 600mm, breakout force: 236kN, displacement: 7200cm³, undercarriage: NLC, boom: monoblock, digging depth: 6570mm, torque: 1800rpm. Transport dimensions X/Y/Z: approx. 10350mm/3000mm/3300mm, weight: approx. 25500kg, operating hours: 20159h. Documentation available. On-site inspection is possible.

Ładowarka kołowa

Doosan DL 450-5

Niemcy

2017

używany

na żądanie

INNO28058

Power: 257kW, displacement: 12700cm³, torque: 1400rpm, bucket capacity: 4.5m³, max. dumping height: 3115mm, backhoe capacity: 4.5m³, outside turning radius: 7205mm, engine type: DC 13, tires: 26.5 R25 (L3), fuel: diesel. Transport dimensions X/Y/Z: approx. 9350mm/3300mm/3600mm, machine weight: approx. 26000kg, operating hours: 6228h. Documentation available. On-site inspection is possible.

Betoniarka

Mercedes Arocs MB 3240B

Niemcy

2018

używany

na żądanie

INNO28057

Power: 290kW, Fuel: Diesel, TÜV: until 07.2025, Payload: 18775kg, Wheelbase: 4250mm, Displacement: 10700cm³, Rated torque: 1900rpm. Machine dimensions X/Y/Z: approx. 6200mm/2500mm/3300mm, weight: approx. 32000kg, mileage: 49873km. Documentation available. On-site inspection is possible.

Koparka gąsienicowa

Hitachi ZX250LC

Niemcy

2008

używany

na żądanie

INNO28056

Engine type: ZX250LCN-3, power: 132kW, fuel: diesel, max. digging depth: 6960mm, cubic capacity: 5193cm³, backhoe capacity: 1.65m³, track width: 600mm, undercarriage: NLC, boom: monoblock. Transport dimensions X/Y/Z: approx. 10300mm/3050mm/3000mm, weight: approx. 25000kg, operating hours: 16645, documentation available. On-site inspection is possible.

Koparka gąsienicowa

Caterpillar 322 CLN

Niemcy

2001

używany

na żądanie

INNO28055

Engine type: CAT 322 BLN, power: 114kW, fuel: diesel, max. digging depth: 2500mm, cubic capacity: 7200cm³, backhoe capacity: 1.4m³, track width: 600mm, backhoe width: 1350mm, max. reach: 9435mm, speed at max. torque: 1800rpm, boom: monobloc. Transport dimensions X/Y/Z: approx. 10500mm/3000mm/3200mm, weight: approx. 25000kg, operating hours: 16883h. Documentation available. On-site inspection possible.

Spychacz

Liebherr PR 722 BL

Niemcy

1995

używany

na żądanie

INNO27985

A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.

Maszyna do gięcia żelaza

Mep Macchine Elettroniche Piegatrici System N

Niemcy

1997

używany

na żądanie

INNO27902

Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.

Podnośnik zębatkowy

Steinweg Böcker 500 Z

Niemcy

2002

używany

na żądanie

INNO27828

Conveying speed: 30m/min, load capacity lift: 500kg, max. total mass of car and payload: 1.6t, control: Steinweg LIFTOMATIK, connected load: 3.7kW. Machine dimensions X/Y/Z: approx. 1600mm/1400mm/1800mm, weight: approx. 750kg. The machines safety brake must be replaced due to UVV. Documentation available. On-site inspection is possible.

System napełniania worków cementem

Rotopacker Zipper 50/400

Niemcy

1993

używany

na żądanie

INNO27804

An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible.

Platforma robocza

Manitou AETJC

Niemcy

2022

używany

na żądanie

INNO27556

Two Manitou work platforms are available. 1) Manitou 120 AETJC 2 3D aerial work platform, year of manufacture: 2022, basic load capacity: 200kg, working height: 11.95m, max. outreach: 7m, drive: electric, weight: approx. 6550kg. 2) Manitou MA 120 AETJC 2 articulated work platform, year of manufacture: 2022, basic load capacity: 200kg, working height: 11.95m, max. outreach: 7m, drive: electric, weight: approx. 6550kg. Documentation available. On-site inspection is possible.

Linia do produkcji kostki brukowej

Omag

Niemcy

1990

używany

na żądanie

INNO27435

A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible.

Teleskopowa platforma robocza

Haulotte STAR 10

Niemcy

2015

używany

na żądanie

INNO27331

Working height: 10m, platform height: 8m, horizontal reach: 3m, platform load capacity: 200kg, platform dimensions X/Y: 780mm/980mm, turning circle: 1880mm, wheelbase: 1200m, ground clearance: 100mm. Extension swivel range: -60°/+70°, hydraulic system capacity: 7l, climbing ability: 23%, drive speed: 5km/h, turntable rotation: 345°, tilt alarm: 3°, maximum permissible manual force/wind speed: 400N(40kg)/12.5m/s(45km/h). Dimensions X/Y/Z (folded): Approx. 2700mm/1000mm/2000mm, Weight: approx. 2800kg. Documentation available. One defect is present (in need of repair).

Teleskopowa platforma robocza

Genie S-85

Niemcy

2014

używany

na żądanie

INNO27184

Max. working height: 25.91m, max. platform height: 25.91m, max. horizontal reach: 23.32m, ground reach: 2.64m, platform capacity on/unrestricted: 300kg/454kg, platform capacity: 2 persons, max. lateral force: 400N, max. inclination: 2.5°/4.5°, max. wind speed: 12.5m/s, gradeability: 45%, rated power: 74hp. Dimensions X/Y/Z: approx. 2.5m/12.4m/2.8m, weight: approx. 17000kg.

Przyczepa budowlana

Blyss Office 600

Niemcy

2021

używany

na żądanie

INNO27129

Internal dimensions X/Y/Z: 5200mm/2300mm/2300mm, floor: multiplex board 2x18mm, walls: sandwich 40mm, wheels: 195/50R13C, axles: 2x1350kg/braked, refrigerator, WC, 3x radiators, approval: 100km/h. Documentation available. On-site inspection is possible.

Wiertarka

Hausherr HBM 120 S

Niemcy

2006

używany

na żądanie

INNO27055

Power: 403kW, max. drilling depth: 108m, max. drilling diameter: 311mm, chassis: crawler chassis, dimensions X/Y/Z: approx. 10500mm/2500mm/3800, weight: approx. 31000kg, operating hours: 12300h. Including 36m drill pipe on the boom (without drill bit) and new 72m drill pipe as replacement. Compressor must be checked. On-site inspection is possible.

Podnośnik nożycowy

Skyjack SJ 3219

Niemcy

2013

używany

na żądanie

INNO26967

Load capacity: 227kg, max. tilt angle: 3.5°, max. wind speed: 9.4m/s, platform height: 5800mm, operating pressure: 207bar, max. tire load: 570kg, weight: 1312kg. The battery is defective and the machine cannot be moved for long. Replacing the battery will probably solve the problem. Documentation available.